Enabling SLI

Flava0ne · Aug 19, 2008, 05:08 PM

I just formatted my system and after installing my video drivers, the pop-up notification to enable SLI never showed up. When I go into the nVidia control panel, the option to enable SLI isn't there. I had SLI enabled prior to formatting my system, and I didn't touch any of my components at all. Is there another way to enable SLI on my system?

newtekie1 · Aug 19, 2008, 05:19 PM

If you are using Vista, make sure you have installed Service Pack 1. What drivers are you using? If they aren't the latest, have your tried the latest(177.83 I think).

Flava0ne · Aug 19, 2008, 05:42 PM

Yeah, I got Service Pack 1 installed. I've had the latest drivers installed prior to formatting my system and it gave me nothing but problems. I currently have 175.16 installed. Unless updating my drivers to the latest is the only issue, is there another way to enable SLI?

Flava0ne · Aug 19, 2008, 06:08 PM

I just uninstalled my 175.16 video drivers totally from my system with Driver Cleaner, and installed the latest 175.19 video drivers. But still no pop-up notification to enable SLI and still not available in nVidia control panel. I even tried installing a different SLI bridge but nothing.

Solaris17 · Aug 19, 2008, 06:11 PM

remove one card boot system (make sure sli stuff if any if enabled or auto in bios) after the system boots up shut it back down install the other card and boot up again.

newtekie1 · Aug 19, 2008, 07:18 PM

175.XX, thats your problem right there. The 175 drivers were shit, go get the 177.83 drivers.

Flava0ne · Aug 19, 2008, 11:38 PM

Okay, I just installed the 177.89 drivers and still the same thing.

After testing out my second video card by putting it in the first PCI express slot, I'm not able to see anything on my monitor and my EVGA 680i SLI A1 board displays a 50 error code. I looked in the manual and it says that the 50 error code means NVMM - Restore, and exit NVMM. What exactly does that mean? At least now I know that it isn't a driver issue but a hardware issue.

sneekypeet · Aug 19, 2008, 11:58 PM

unless they changed how they install...I had to instal 1 GPU run the driver install...reboot.

Then add the second card...driver install again...reboot.

Activate SLI in control panel

kid41212003 · Aug 20, 2008, 12:42 AM

Installed 1 card first, switching DVI output for your monitor until it display, and like Solaris17 said, start up Windows with 1 card first, then restart and put in the second card.

Flava0ne · Aug 20, 2008, 04:10 AM

Well, like what I said in my last post... I already tried installing the other card on the first PCI express slot and my system would make one long beep sound then won't boot up. The error code on my EVGA 680i SLI A1 mobo shows up as 50. I think that my second video card prematurely failed. Can I return it for an RMA with BFG Tech?

OzzmanFloyd120 · Aug 20, 2008, 04:23 AM

You should if it's within warranty, if it's not just buy another from best buy or the egg, it really doesn't matter, install your new card and return the old one saying it doesn't work.
I know this isn't honest, but neither is the $$$ we dump into our hardware only to have it fail on us.

Solaris17 · Aug 20, 2008, 04:29 AM

If its not under warrenty i know the director of marketing at BFG and he has been willing to help me with all my problems with the 9600 ang 9800GTX series card...do you have a reccipt? online or paper? if so or if not if you need me let me know and ill talk to him and introduce you both if need be. though he is kinda a big gun so if you have a recipt and just arent bothered finding it idk if i can help you because he usually doesnt deal with stuff like this but he has alot of BFG tech by the balls so im sure he could pull some strings.

OzzmanFloyd120 · Aug 20, 2008, 04:31 AM

Sol's fraud-free idea is WAY better than mine.

newtekie1 · Aug 20, 2008, 01:35 PM

Quote:

Originally Posted by Flava0ne

Well, like what I said in my last post... I already tried installing the other card on the first PCI express slot and my system would make one long beep sound then won't boot up. The error code on my EVGA 680i SLI A1 mobo shows up as 50. I think that my second video card prematurely failed. Can I return it for an RMA with BFG Tech?

Yes, by your last post, that is exactly what it sounds like. You shouldn't have a problem RMAing the card to BFG, they have lifetime warranties.

Quote:

Originally Posted by sneekypeet

unless they changed how they install...I had to instal 1 GPU run the driver install...reboot.

Then add the second card...driver install again...reboot.

Activate SLI in control panel

I've never had to do it this way with any of my SLI rigs. That is the method for Crossfire, SLI doesn't require that much hassle.

Solaris17 · Aug 20, 2008, 06:05 PM

Quote:

Originally Posted by newtekie1

I've never had to do it this way with any of my SLI rigs. That is the method for Crossfire, SLI doesn't require that much hassle.

thats true but this is an unusual situation.

EnergyFX · Aug 20, 2008, 06:13 PM

Did one card work and the other not work from the same PCI-E slot? You might want to verify that it's not an issue with a particular PCI-E slot on the MB.

A single card should work from any PCI-E slot on the board.

Asylum · Aug 21, 2008, 04:21 PM

I had the same problem....to get it to work i installed 1 card...then the other....then shut down and installed my bridge. I had black screen and had to reset my bios untill i did it that way.

Flava0ne · Aug 21, 2008, 06:08 PM

Quote:

Originally Posted by EnergyFX

Did one card work and the other not work from the same PCI-E slot? You might want to verify that it's not an issue with a particular PCI-E slot on the MB.

A single card should work from any PCI-E slot on the board.

Yup, like what I said in my other post... I took the top card out completely then installed only the bottom card on top and nothing happens when I try to boot up. There's a short beep (a little longer than the POST beep) right after I power up my system and nothing shows up on my monitor.

Flava0ne · Aug 21, 2008, 06:09 PM

Quote:

Originally Posted by Solaris17

If its not under warrenty i know the director of marketing at BFG and he has been willing to help me with all my problems with the 9600 ang 9800GTX series card...do you have a reccipt? online or paper? if so or if not if you need me let me know and ill talk to him and introduce you both if need be. though he is kinda a big gun so if you have a recipt and just arent bothered finding it idk if i can help you because he usually doesnt deal with stuff like this but he has alot of BFG tech by the balls so im sure he could pull some strings.

Well, here's the thing... I removed the heatsink/fan assembly off of the video card cause I'm running it on liquid cooling. Will I still be able to RMA it after reinstalling the heatsink/fan assembly?

Flava0ne · Aug 21, 2008, 06:10 PM

Quote:

Originally Posted by Asylum

I had the same problem....to get it to work i installed 1 card...then the other....then shut down and installed my bridge. I had black screen and had to reset my bios untill i did it that way.

Dude, sorry to say this but you're lost.

Asylum · Aug 21, 2008, 06:31 PM

No im not lost you just didnt make it clear if you were installing a single card or not. As far as the beep goes...mine did that 1 time cause i forgot to plug the power into my card...probly not related to your issue...unless your haveing a power supply issue.

newtekie1 · Aug 21, 2008, 07:26 PM

Quote:

Originally Posted by Flava0ne

Well, here's the thing... I removed the heatsink/fan assembly off of the video card cause I'm running it on liquid cooling. Will I still be able to RMA it after reinstalling the heatsink/fan assembly?

Yes, BFG shouldn't have a problem with it, as long as that isn't the cause of the problem(IE water leaked and damaged the card, or you damaged it while removing/re-installing the heatsink). Usually, as long as you return the card in the same condition you bought it in, they won't have a problem RMAing it.

Solaris17 · Aug 21, 2008, 10:40 PM

Quote:

Originally Posted by newtekie1

Yes, BFG shouldn't have a problem with it, as long as that isn't the cause of the problem(IE water leaked and damaged the card, or you damaged it while removing/re-installing the heatsink). Usually, as long as you return the card in the same condition you bought it in, they won't have a problem RMAing it.

+1 they wont care just put it back together nice dont strip screws or scratch it etc.

Aug 19, 2008, 05:08 PM	#1
Flava0ne Join Date: Mar 2008 Location: Toronto, ON Posts: 463 (0.25/day) Thanks: 61 Thanked 12 Times in 10 Posts System Specs	Enabling SLI I just formatted my system and after installing my video drivers, the pop-up notification to enable SLI never showed up. When I go into the nVidia control panel, the option to enable SLI isn't there. I had SLI enabled prior to formatting my system, and I didn't touch any of my components at all. Is there another way to enable SLI on my system? __________________ 3DMark Fire Strike: 7797 3DMark 11: P13002 3DMark Vantage: P44923 3DMark06: 31100

System Name:	Project X-Class
Processor:	Intel Core i7-980 OC 4.40GHz (25×176MHz) 12MB L3 Cache 32nm LGA1366 Gulftown Hexa-Core Processor
Motherboard:	EVGA X58 Classified3 Triple Channel DDR3 Socket LGA1366 E-ATX Motherboard on BIOS Rev. 83
Cooling:	Corsair Hydro Series H80 High-Performance Lapped CPU Liquid Cooler with Dual 120mm Push-Pull Fans
Memory:	Corsair Dominator GT 24GB (6×4GB) @ 1756MHz 9-9-9-24 1.66V DDR3 PC3-16000 Memory Kit
Video Card:	MSI N580GTX Lightning Xtreme Edition OC 900/1800MHz 3072MB @ 4300MHz GDDR5 Video Cards (×2) in SLI
Hard Disk:	OCZ RevoDrive 3 X2 Series 240GB (4×60GB) RAID 0 PCI-E ×4 Solid State Disk Flash Drive Card
Optical Drive:	Plextor PX-LB950SA SATA 12× Blu-ray Writer Drive
CRT/LCD Model:	Sony Bravia EX400 32" Full 1080p HD LCD TV via Monster M-Series M2000 HDMI HDTV Cable
Case:	Corsair Obsidian Series 800D Full-Tower Chassis with Custom 140mm Window Side Panel GPU Fan Blowhole
Sound Card:	Creative Labs Sound Blaster X-Fi XtremeGamer Fatal1ty Professional Series PCI Surround Sound Card
PSU:	Corsair Professional Series Gold AX1200 1200-Watt 80+ Gold Certified Fully-Modular Power Supply Unit
Software:	Microsoft Windows 7 Ultimate 64-bit Edition with Service Pack 1 build 6.1.7601.17514
Benchmarks:	On My Signature

Aug 19, 2008, 05:19 PM	#2
newtekie1 Semi-Retired Folder Join Date: Nov 2005 Location: Indiana Posts: 17,754 (6.48/day) Thanks: 780 Thanked 5,116 Times in 3,707 Posts System Specs	If you are using Vista, make sure you have installed Service Pack 1. What drivers are you using? If they aren't the latest, have your tried the latest(177.83 I think). __________________ Rig1: System Specs. Rig2: A8-5600K@4.4GHz / AsRock FM2A75 Pro4 / 8GB Corsair DDR3-1600 9-9-9-24 / HD7560D / Samsung DVD-Burner / 1.5TB WD Green + 3x3TB WD RED in RAID5 Rig3: Athlon X2 4200+ / M4A79 Deluxe / 4GB G.Skill Pi DDR2-800 4-4-4-12 / GT430 / Sony DVD-Burner / 500GB WD Rig4: Phenom II x6 1605T @ 3.6GHz / Asus M5A99X Evo / 8GB PNY DDR3-1600 9-9-9 / GTX470 & GTX470 / Samsung DVD-Burner / 1.5TB Seagate

Processor:	Intel Core i7 875K@4.0GHz(200x20)
Motherboard:	eVGA P55 FTW 200
Cooling:	Thermalright Ultra-120 Extreme w/ Corsair SP120 High Performance Edition
Memory:	8GB Corsair DDR3-1600 7-7-7-20
Video Card:	ASUS GTX 670 4GB DirectCU II @ 1015/3600
Hard Disk:	1TB Seagate 7200.12(OS), 3x 1.5TB Seagate 7200.11 in RAID 5
Optical Drive:	Lite-On Blu-Ray Combo Drive IHES108
CRT/LCD Model:	HP 25" 2509m 1080p LCD
Case:	Lian-Li Lancool Metal Boned K7 w/ Windowed Side Panel
Sound Card:	Onboard is good enough for me
PSU:	Corsair HX850
Software:	Windows 7 x64 Professional

Aug 19, 2008, 05:42 PM	#3
Flava0ne Join Date: Mar 2008 Location: Toronto, ON Posts: 463 (0.25/day) Thanks: 61 Thanked 12 Times in 10 Posts System Specs	Yeah, I got Service Pack 1 installed. I've had the latest drivers installed prior to formatting my system and it gave me nothing but problems. I currently have 175.16 installed. Unless updating my drivers to the latest is the only issue, is there another way to enable SLI? __________________ 3DMark Fire Strike: 7797 3DMark 11: P13002 3DMark Vantage: P44923 3DMark06: 31100

Aug 19, 2008, 06:08 PM	#4
Flava0ne Join Date: Mar 2008 Location: Toronto, ON Posts: 463 (0.25/day) Thanks: 61 Thanked 12 Times in 10 Posts System Specs	I just uninstalled my 175.16 video drivers totally from my system with Driver Cleaner, and installed the latest 175.19 video drivers. But still no pop-up notification to enable SLI and still not available in nVidia control panel. I even tried installing a different SLI bridge but nothing. __________________ 3DMark Fire Strike: 7797 3DMark 11: P13002 3DMark Vantage: P44923 3DMark06: 31100

Aug 19, 2008, 06:11 PM	#5
Solaris17 Creator Solaris Utility DVD Join Date: Aug 2005 Location: Reinacting scenes from platoon with Charlie Sheen Posts: 13,708 (4.83/day) Thanks: 4,366 Thanked 3,295 Times in 2,311 Posts System Specs	remove one card boot system (make sure sli stuff if any if enabled or auto in bios) after the system boots up shut it back down install the other card and boot up again. __________________ I Made the Millionth post! \| "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide Vista Mark

System Name:	Prometheus
Processor:	Xeon W 3520 4.5ghz
Motherboard:	DFI Lanparty UT t3eH8
Cooling:	Xigmatek Dark Knight
Memory:	(3x8GB) 24GB Avexir Core series triple channel 1600mhz
Video Card:	MSI GTX470
Hard Disk:	OCZ Agility3 120, SS 1TB, SS 2TB
Optical Drive:	Pioneer DVD Dual layer burner R+RW (Firmware Upgrade)/Philips lightscribe DVD burner Dual layer
CRT/LCD Model:	Dell 2007FP
Case:	Xigmatek Utgard
Sound Card:	ASUS Xonar D2X 7.1 on Logitec X-540/Razer Carcharias
PSU:	Corsair HX1000
Software:	Windows8 x64 \|\|Poser7, Cinema4D, CS5, 3DSM10, Lightwave9, Bryce7
Benchmarks:	I'm such a tease

Aug 19, 2008, 07:18 PM	#6
newtekie1 Semi-Retired Folder Join Date: Nov 2005 Location: Indiana Posts: 17,754 (6.48/day) Thanks: 780 Thanked 5,116 Times in 3,707 Posts System Specs	175.XX, thats your problem right there. The 175 drivers were shit, go get the 177.83 drivers. __________________ Rig1: System Specs. Rig2: A8-5600K@4.4GHz / AsRock FM2A75 Pro4 / 8GB Corsair DDR3-1600 9-9-9-24 / HD7560D / Samsung DVD-Burner / 1.5TB WD Green + 3x3TB WD RED in RAID5 Rig3: Athlon X2 4200+ / M4A79 Deluxe / 4GB G.Skill Pi DDR2-800 4-4-4-12 / GT430 / Sony DVD-Burner / 500GB WD Rig4: Phenom II x6 1605T @ 3.6GHz / Asus M5A99X Evo / 8GB PNY DDR3-1600 9-9-9 / GTX470 & GTX470 / Samsung DVD-Burner / 1.5TB Seagate

Aug 19, 2008, 11:38 PM	#7
Flava0ne Join Date: Mar 2008 Location: Toronto, ON Posts: 463 (0.25/day) Thanks: 61 Thanked 12 Times in 10 Posts System Specs	Okay, I just installed the 177.89 drivers and still the same thing. After testing out my second video card by putting it in the first PCI express slot, I'm not able to see anything on my monitor and my EVGA 680i SLI A1 board displays a 50 error code. I looked in the manual and it says that the 50 error code means NVMM - Restore, and exit NVMM. What exactly does that mean? At least now I know that it isn't a driver issue but a hardware issue. __________________ 3DMark Fire Strike: 7797 3DMark 11: P13002 3DMark Vantage: P44923 3DMark06: 31100

Aug 19, 2008, 11:58 PM	#8
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 19,009 (7.31/day) Thanks: 3,037 Thanked 5,487 Times in 3,950 Posts System Specs	unless they changed how they install...I had to instal 1 GPU run the driver install...reboot. Then add the second card...driver install again...reboot. Activate SLI in control panel __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

System Name:	His
Processor:	Intel i7 3770K Cooled with Swiftech Apogee Drive II
Motherboard:	Asus Maximus V Extreme
Cooling:	Swiftech MCR-320 Cooled With Corsair SP120 Fans
Memory:	4X4GB Corsair Dominator Platinum 2666 C11
Video Card:	Asus GTX680 Direct Cu II TOP
Hard Disk:	Corsair Force GT 180GB / Samsung Spinpoint F1 1TB
Optical Drive:	- - - - - - -
CRT/LCD Model:	Samsung 40" 120hz LCD
Case:	SilverStone Temjin TJ11
Sound Card:	Realtek on board > Sony receiver > Cerwin Vega's
PSU:	Corsair AX1200
Software:	Windows 7 Ultimate 64

Aug 20, 2008, 12:42 AM	#9
kid41212003 Join Date: Jul 2008 Location: California Posts: 2,558 (1.43/day) Thanks: 312 Thanked 533 Times in 435 Posts System Specs	Installed 1 card first, switching DVI output for your monitor until it display, and like Solaris17 said, start up Windows with 1 card first, then restart and put in the second card. __________________

System Name:	Transformer III
Processor:	Core i5 3570k
Motherboard:	Gigabyte Z77 UD3
Cooling:	Noctua NH-U12P SE
Memory:	Corsair Mainstream 2GBx2 kit default timing.
Video Card:	EVGA GTX570
Hard Disk:	Intel 510 128 GB SSD,3x 250GB Seagate RAID 0, 1.5TB Seagate Xtreme Media storage.
Optical Drive:	LG Black 6X Blu-ray GGC-H20L, SAMSUNG 22X DVD±R DVD Burner SH-S223Q
CRT/LCD Model:	Westinghouse 24" L2410NM and Samsung 226BW 22"
Case:	Cooler Master HAF-XM
PSU:	HX1000
Benchmarks:	3DMark 2006: 23295 8800GT SLI, 21812 GTX280, 25197 9800GTX+ SLI.

Aug 20, 2008, 04:10 AM	#10
Flava0ne Join Date: Mar 2008 Location: Toronto, ON Posts: 463 (0.25/day) Thanks: 61 Thanked 12 Times in 10 Posts System Specs	Well, like what I said in my last post... I already tried installing the other card on the first PCI express slot and my system would make one long beep sound then won't boot up. The error code on my EVGA 680i SLI A1 mobo shows up as 50. I think that my second video card prematurely failed. Can I return it for an RMA with BFG Tech? __________________ 3DMark Fire Strike: 7797 3DMark 11: P13002 3DMark Vantage: P44923 3DMark06: 31100

Aug 20, 2008, 04:23 AM	#11
OzzmanFloyd120 Join Date: Apr 2008 Location: Pontaic Michigan Posts: 2,150 (1.15/day) Thanks: 177 Thanked 305 Times in 270 Posts System Specs	You should if it's within warranty, if it's not just buy another from best buy or the egg, it really doesn't matter, install your new card and return the old one saying it doesn't work. I know this isn't honest, but neither is the $$$ we dump into our hardware only to have it fail on us. __________________ Help, I need to sell my stuff to pay bills! - TPU's ATHF Fan Club! - The Video Editors' Clubhouse

System Name:	The Netbook
Processor:	Intel Atom n270
Memory:	1GB DDR2 533mhz
Video Card:	Intel G945
Hard Disk:	250GB
CRT/LCD Model:	10.1" LCD
Software:	Microsoft Windows 7 Starter x86

Aug 20, 2008, 04:29 AM	#12
Solaris17 Creator Solaris Utility DVD Join Date: Aug 2005 Location: Reinacting scenes from platoon with Charlie Sheen Posts: 13,708 (4.83/day) Thanks: 4,366 Thanked 3,295 Times in 2,311 Posts System Specs	If its not under warrenty i know the director of marketing at BFG and he has been willing to help me with all my problems with the 9600 ang 9800GTX series card...do you have a reccipt? online or paper? if so or if not if you need me let me know and ill talk to him and introduce you both if need be. though he is kinda a big gun so if you have a recipt and just arent bothered finding it idk if i can help you because he usually doesnt deal with stuff like this but he has alot of BFG tech by the balls so im sure he could pull some strings. __________________ I Made the Millionth post! \| "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide Vista Mark

Aug 20, 2008, 04:31 AM	#13
OzzmanFloyd120 Join Date: Apr 2008 Location: Pontaic Michigan Posts: 2,150 (1.15/day) Thanks: 177 Thanked 305 Times in 270 Posts System Specs	Sol's fraud-free idea is WAY better than mine. __________________ Help, I need to sell my stuff to pay bills! - TPU's ATHF Fan Club! - The Video Editors' Clubhouse

Aug 20, 2008, 06:13 PM	#16
EnergyFX Join Date: Nov 2007 Location: Annapolis, MD Posts: 1,396 (0.69/day) Thanks: 477 Thanked 350 Times in 237 Posts System Specs	Did one card work and the other not work from the same PCI-E slot? You might want to verify that it's not an issue with a particular PCI-E slot on the MB. A single card should work from any PCI-E slot on the board. __________________ Feedback/Rep: Heat -- eBay There is an elegant solution for every problem... and sometimes elegance comes in the form of a very large hammer.

System Name:	n.audBl
Processor:	E8500 @ 3.80GHz
Motherboard:	ASUS Striker Extreme
Cooling:	Full liquid (everything except power supply)
Memory:	4Gb OCZ DDR2 PC9600
Video Card:	Dual EVGA GTX 280 SSC Edition
Hard Disk:	Dual WD Raptor in RAID 0 (300Gb), Dual WD 1Tb Cavair in RAID 1
Optical Drive:	ASUS CD/DVD Burner
CRT/LCD Model:	Dell 2407 24" HD+ Widescreen
Case:	Theraltake Tai-Chi
Sound Card:	X-Fi Fata1ty (bleh!)
PSU:	Ultra X3 1000W
Software:	Win 7 64bit

Aug 21, 2008, 04:21 PM	#17
Asylum Join Date: Jul 2008 Location: South Carolina Posts: 2,685 (1.52/day) Thanks: 849 Thanked 654 Times in 501 Posts System Specs	I had the same problem....to get it to work i installed 1 card...then the other....then shut down and installed my bridge. I had black screen and had to reset my bios untill i did it that way. __________________ My Bad Company 2 team is recruiting. Stop by and check us out. -GuNS- CLAN HEATWARE LINK Rate My Rig Last edited by Asylum; Aug 21, 2008 at 04:26 PM.

System Name:	KILLER
Processor:	Intel Core i7 970 @ 4.5Ghz
Motherboard:	EVGA X58 760 Classified
Cooling:	Water Cooling
Memory:	3x2Gig Kingston Hyper X 2100Mhz
Video Card:	EVGA GTX 580
Hard Disk:	2 X Vertex 2 60GB in RAID 0
Optical Drive:	2 x Sony DVD-RW
CRT/LCD Model:	24 in Gateway 1080 HD 1920X1200 2ms
Case:	Corsair 800D
Sound Card:	X-Fi Xtreme Gamer
PSU:	Antec 1200 Watt Modular
Software:	Windows 7 64 Bit
Benchmarks:	3DMark Vantage 37579

Aug 21, 2008, 06:31 PM	#21
Asylum Join Date: Jul 2008 Location: South Carolina Posts: 2,685 (1.52/day) Thanks: 849 Thanked 654 Times in 501 Posts System Specs	No im not lost you just didnt make it clear if you were installing a single card or not. As far as the beep goes...mine did that 1 time cause i forgot to plug the power into my card...probly not related to your issue...unless your haveing a power supply issue. __________________ My Bad Company 2 team is recruiting. Stop by and check us out. -GuNS- CLAN HEATWARE LINK Rate My Rig

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NVIDIA Brings SLI Technology to Intel Bloomfield CPU Platforms	malware	News	26	Jul 15, 2008 07:16 AM
NVIDIA Replaces nForce 570 SLI and 590 SLI Intel Edition	malware	News	0	Oct 4, 2006 05:24 AM
NVIDIA SLI Technology and Intel Core 2 Processors Selected by Global PC Builders	malware	News	8	Jul 28, 2006 06:04 PM
Nvidia bridgeless SLI and SLI AA appear	Dark Ride	News	0	Jul 19, 2005 11:52 PM
ECS KN1 SLI Extreme	W1zzard	Reviews	0	Jul 12, 2005 11:21 AM