Fake GEIL ram?

P4-630 · Sep 17, 2008, 02:33 AM

RMA'd 1 set of GEIL DDR2-800 CL 4-4-4-12 GX22GB6400UDC (2x1GB), I wanted to RMA all my 4 ram sticks but they did not accept that.

Now I found out that my 2 new ram sticks have a sticker on the heatspreader it which reads: Voltage 2.0V

My other GEIL set DDR2-800 CL 4-4-4-12 GX22GB6400UDC (2x1GB) has a sticker on the heatspreader which reads: Voltage 2.1V

Also when I looked closely I found that the pcb/transistors are different from each other.
Ok, probably they changed the pcb design? And the ram sticks are manufactured in another week? Suprisingly when I open CPU-Z all 4 ram sticks: Week/Year 10/08

The new set won't run 960MHz 4-4-4-12 either, while the other set can.

Also with every new GEIL ram stick I found a thin plastic film sticked on the GEIL logo, the "new" set of ram that I just got returned only had this on one ram stick and there was no plastic film on the other stick.

Also I had a problem with the Voltage in the BIOS, my older ram stick rated at 2.1V I always had the Voltage at +0.5 which resulted in 2.3V, now with the new sticks rated at 2.0 I had to set the Voltage at +0.6 to get to 2.3V.

After trying different timings and speeds , at one moment the BIOS settings went back to auto and now when I would set the DIMM Voltage +0.5V results in 2.3V again with all 4 sticks in it.

Somehow I don't feel so good about these new ticks that I got returned(Thailand), the PCB design/transistors are different and the rated voltage is different, and manufactured in the same week as my older ram sticks

to me it looks like FAKE geil sticks? Or just cheap pcb's with a orange heatspreader and GEIL logo sticked on it?

Now I run my 4 sticks at 5-5-5-10 960 2.0V (the voltage is not bad but they used to run 4-4-4-12 960 2.3V) the new ram sticks seem to be low quality

If anyone ownes GEIL DDR2 800 4-4-4-12 sticks, could you post a picture and week/year from your ram sticks?

Laurijan · Sep 17, 2008, 03:05 AM

They probably just changed the PCB and components a little.. that happens sometimes as RAM sticks mature.. looks genuine to me

P4-630 · Sep 17, 2008, 03:13 AM

Quote:

Originally Posted by Laurijan

They probably just changed the PCB and components a little.. that happens sometimes as RAM sticks mature.. looks genuine to me

Yes what I thought too but is it not weird that the returned set are manufactured in the same week as my older set

All 4 sticks are Week 10 2008 (cpu-z)

Laurijan · Sep 17, 2008, 03:16 AM

Quote:

Originally Posted by P4-630

Yes what I thought too but is it not weird that the returned set are manufactured in the same week as my older set

All 4 sticks are Week 10 2008 (cpu-z)

True.. strage.. IDK why this is.. You could write the RMA department an email with this question if nobody here in this forum knows why that date is the same..

CrAsHnBuRnXp · Sep 17, 2008, 03:28 AM

Doesnt this forum have a GeiL rep?

Laurijan · Sep 17, 2008, 03:30 AM

You could also post your question in the Geil-Forum http://forum.geil.com.tw/ (seems to be down at the moment)

P4-630 · Sep 17, 2008, 03:30 AM

Quote:

Originally Posted by Laurijan

True.. strage.. IDK why this is.. You could write the RMA department an email with this question if nobody here in this forum knows why that date is the same..

I'm sending a message to GEIL right now.

(http://www.geil.com.tw/support_request/create)

Edit: Waiting for reply from geil.tw

P4-630 · Sep 17, 2008, 03:32 AM

Quote:

Originally Posted by CrAsHnBuRnXp

Doesnt this forum have a GeiL rep?

I don't know about that.
Would be nice if that person could help out.

P4-630 · Sep 17, 2008, 04:04 AM

I found a photo on imageshack from a set of geil pc6400 ultra 4-4-4-12 and these sticks are exactly as my older 2 sticks and also these on this picture are rated at 2.1V

For a comparison:
My ram sticks (module at the top is a "new"(?..) one from the set I got returned yesterday):

picture from imageshack (not my ram sticks)

intel igent · Sep 17, 2008, 04:04 AM

you have stix of RAM that are rated to 800 and are running 960 and you're complaining?

P4-630 · Sep 17, 2008, 04:15 AM

Quote:

Originally Posted by intel igent

you have stix of RAM that are rated to 800 and are running 960 and you're complaining?

Most, if not all(?) other 800rated sticks are able to run 960 when you change the timings

Most people buy the more expensive ram because they want to overclock, if I don't overclock I would buy cheaper value ram.

These GEIL ultra sticks are made for overclocking and thats what you pay for.

intel igent · Sep 17, 2008, 04:19 AM

Quote:

Originally Posted by P4-630

Most, if not all(?) other 800rated sticks are able to run 960 when you change the timings

so what's the problem?

Paulieg · Sep 17, 2008, 04:22 AM

Quote:

Originally Posted by CrAsHnBuRnXp

Doesnt this forum have a GeiL rep?

Buffalo, Mushkin for sure. Geil? I don't remember ever seeing one.

P4-630 · Sep 17, 2008, 04:24 AM

Quote:

Originally Posted by intel igent

so what's the problem?

Never mind

Some people agree and understand, and some don't.

intel igent · Sep 17, 2008, 04:28 AM

Quote:

Originally Posted by P4-630

Never mind

Some people agree and understand, and some don't.

i do understand.

you got a set of RMA'd RAM that does not run as good as your original set but still OC's 160mhz with looser timing's.....

P4-630 · Sep 17, 2008, 04:31 AM

Quote:

Originally Posted by intel igent

i do understand.

you got a set of RMA'd RAM that does not run as good as your original set but still OC's 160mhz with looser timing's.....

Ok... Now and what if these sticks were yours, what would you do

Paulieg · Sep 17, 2008, 04:31 AM

Quote:

Originally Posted by P4-630

Never mind

Some people agree and understand, and some don't.

I think everyone understands, but a 160mhz OC on 800's is pretty good. Certainly nothing to stress about. Play around with the timings a bit more for extra performance.

P4-630 · Sep 17, 2008, 04:35 AM

Quote:

Originally Posted by Paulieg

I think everyone understands, but a 160mhz OC on 800's is pretty good. Certainly nothing to stress about. Play around with the timings a bit more for extra performance.

The fact remains: the other 2 modules are much better while suprisingly all 4 ram sticks seem to be manufactured in week 10 2008.

intel igent · Sep 17, 2008, 04:37 AM

Quote:

Originally Posted by P4-630

Ok... Now and what if these sticks were yours, what would you do

i'd be slightly dissapointed but they aren't defective so.....

Paulieg · Sep 17, 2008, 04:40 AM

Quote:

Originally Posted by P4-630

The fact remains: the other 2 modules are much better while suprisingly all 4 ram sticks seem to be manufactured in week 10 2008.

That's how it goes man. Every individual stick will clock different. That's the risk in RMA. Same goes for CPU, Memory, MB's etc. Remember, anything you get over stock you get for free.

. Not to say I wouldn't be mildly disappointed, just not really upset.

P4-630 · Sep 17, 2008, 04:42 AM

Quote:

Originally Posted by intel igent

i'd be slightly dissapointed.....

yes because you know that 2 sticks can run faster with tighter timings then the ones you got returned from RMA even they seem to be manufactured in the same week.

P4-630 · Sep 17, 2008, 04:47 AM

Quote:

Originally Posted by Paulieg

That's how it goes man. Every individual stick will clock different. That's the risk in RMA. Same goes for CPU, Memory, MB's etc. Remember, anything you get over stock you get for free.

. Not to say I wouldn't be mildly disappointed, just not really upset.

I'm not upset, but it's more like a strange situation because the modules are completely different from each other and yet they are manufactured at the same time!

If they only were manufactured in a different week, that would just make more sense.

Quote:

Originally Posted by Paulieg

Remember, anything you get over stock you get for free.

.

That's true

Wile E · Sep 17, 2008, 04:50 AM

Quote:

Originally Posted by P4-630

Yes what I thought too but is it not weird that the returned set are manufactured in the same week as my older set

All 4 sticks are Week 10 2008 (cpu-z)

That's probably just the the date of the SPD file they are using.

Paulieg · Sep 17, 2008, 04:52 AM

Quote:

Originally Posted by Wile E

That's probably just the the date of the SPD file they are using.

Man, I didn't think of that. Wile is probably right here.

P4-630 · Sep 17, 2008, 04:56 AM

Quote:

Originally Posted by Wile E

That's probably just the the date of the SPD file they are using.

yes, and who were "they"..*
And why would the modules be completely different at the same time.

*because here in Thailand they copy anything...

I hope I'll get a reply soon from geil.com.tw

------------------------------------------
Something else that has nothing to to with the tread but just noticed it while editing my post:

Well I just voted my post then

Sep 17, 2008, 02:33 AM	#1
P4-630 Join Date: Jan 2006 Posts: 597 (0.22/day) Thanks: 37 Thanked 30 Times in 27 Posts System Specs	Never knew that GEIL made single sided ddr2 pc6400 ultra 4-4-4-12 RMA'd 1 set of GEIL DDR2-800 CL 4-4-4-12 GX22GB6400UDC (2x1GB), I wanted to RMA all my 4 ram sticks but they did not accept that. Now I found out that my 2 new ram sticks have a sticker on the heatspreader it which reads: Voltage 2.0V My other GEIL set DDR2-800 CL 4-4-4-12 GX22GB6400UDC (2x1GB) has a sticker on the heatspreader which reads: Voltage 2.1V Also when I looked closely I found that the pcb/transistors are different from each other. Ok, probably they changed the pcb design? And the ram sticks are manufactured in another week? Suprisingly when I open CPU-Z all 4 ram sticks: Week/Year 10/08 The new set won't run 960MHz 4-4-4-12 either, while the other set can. Also with every new GEIL ram stick I found a thin plastic film sticked on the GEIL logo, the "new" set of ram that I just got returned only had this on one ram stick and there was no plastic film on the other stick. Also I had a problem with the Voltage in the BIOS, my older ram stick rated at 2.1V I always had the Voltage at +0.5 which resulted in 2.3V, now with the new sticks rated at 2.0 I had to set the Voltage at +0.6 to get to 2.3V. After trying different timings and speeds , at one moment the BIOS settings went back to auto and now when I would set the DIMM Voltage +0.5V results in 2.3V again with all 4 sticks in it. Somehow I don't feel so good about these new ticks that I got returned(Thailand), the PCB design/transistors are different and the rated voltage is different, and manufactured in the same week as my older ram sticks to me it looks like FAKE geil sticks? Or just cheap pcb's with a orange heatspreader and GEIL logo sticked on it? Now I run my 4 sticks at 5-5-5-10 960 2.0V (the voltage is not bad but they used to run 4-4-4-12 960 2.3V) the new ram sticks seem to be low quality If anyone ownes GEIL DDR2 800 4-4-4-12 sticks, could you post a picture and week/year from your ram sticks? Attached Thumbnails Last edited by P4-630; Sep 17, 2008 at 11:15 AM. Reason: changed title

System Name:	YourDaddy
Processor:	E7200 @ 3800MHz
Motherboard:	Gigabyte EP35-DS3R
Cooling:	Sunbeam core contact freezer, Thermalright HR-05 IFX NB+AC turbo module fan+ 2x120mm Lian-Li fans
Memory:	Geil 4x1GB PC2-6400 Ultra @ 1000Mhz
Video Card:	HIS 4870 1GB gddr5/Thermalright HR-03 GT + AC 80mm pwm fan
Hard Disk:	Seagate sata II 320/500/500GBs
Optical Drive:	LG
CRT/LCD Model:	Acer 17 Inch
Case:	Lian-Li PC-G7 black
Sound Card:	Realtek HD audio onboard
PSU:	Enermax Liberty 400W
Benchmarks:	P9832 3d Mark Vantage 16175 3d Mark06

Sep 17, 2008, 03:05 AM	#2
Laurijan Join Date: Feb 2007 Location: Oulu, Finland Posts: 1,935 (0.84/day) Thanks: 270 Thanked 352 Times in 282 Posts System Specs	They probably just changed the PCB and components a little.. that happens sometimes as RAM sticks mature.. looks genuine to me __________________ If you want to quit smoking tobacco this is a must see: ☆☆☆The Electronic-Cigarette Club☆☆☆ @ GN.net Laurijan´s Heat My worldwide sales thread

System Name:	Enslaver :)
Processor:	Intel i5 3570K Ivy Bridge
Motherboard:	ASRock Z77 Extreme4
Cooling:	CPU: Noctua NH-D14, Case: 4x12cm Noctua
Memory:	8GB DDR3 Samsung 30nm MV-3V4G3
Video Card:	ASUS GTX560Ti DirectCUII TOP 1GB
Hard Disk:	OCZ Agility 3 120GB SSD for OS, Seagte internal 500GB Download-cache, Seagate external 2TB for Media
Optical Drive:	Samsung DVD-RW/RAM, LG DVD-RW/RAM
CRT/LCD Model:	Samsung UE40D6200 Full-HD 3D LED LCD TV
Case:	Antec P182, Gunmetal Black Edition
Sound Card:	Razer Barracuda AC-1 soundcard, Logitech Z-5450 5.1 speakers
PSU:	Termaltake Thoughpower 750W, Cable management
Software:	Windows 7 Ultimate SP1 x64

System Name:	YourDaddy
Processor:	E7200 @ 3800MHz
Motherboard:	Gigabyte EP35-DS3R
Cooling:	Sunbeam core contact freezer, Thermalright HR-05 IFX NB+AC turbo module fan+ 2x120mm Lian-Li fans
Memory:	Geil 4x1GB PC2-6400 Ultra @ 1000Mhz
Video Card:	HIS 4870 1GB gddr5/Thermalright HR-03 GT + AC 80mm pwm fan
Hard Disk:	Seagate sata II 320/500/500GBs
Optical Drive:	LG
CRT/LCD Model:	Acer 17 Inch
Case:	Lian-Li PC-G7 black
Sound Card:	Realtek HD audio onboard
PSU:	Enermax Liberty 400W
Benchmarks:	P9832 3d Mark Vantage 16175 3d Mark06

Sep 17, 2008, 03:28 AM	#5
CrAsHnBuRnXp Eligible for custom title Join Date: Oct 2007 Location: United States Posts: 5,078 (2.49/day) Thanks: 451 Thanked 640 Times in 526 Posts System Specs	Doesnt this forum have a GeiL rep? __________________ Raid Arrays Explained Wanna look up your BSOD code? Heatware under CrAsHnBuRnXp http://crashtown.myminicity.com/ind CrAsHnBuRnXP's For Sale Thread

System Name:	H1200
Processor:	Intel i5 2500k @ 4.3GHz w/ Corsair H60
Motherboard:	Asus P8P67 (Rev 3.1)
Cooling:	1x200mm LED fan, 5x120mm LED fans
Memory:	G.skill DDR3 1600MHz 2x2GB @ 2133MHz
Video Card:	BFG nVIDIA GTX 285
Hard Disk:	Mushkin 120GB Chronos SSD, Seagate 750GB SATAII & WD 250GBx2 SATAII
Optical Drive:	LiteOn DVD-ROM, LG DVD-RW± DL SATA
CRT/LCD Model:	LG 24 inch Flatron
Case:	Antec Twelve Hundred Full Tower
Sound Card:	Creative X-Fi XtremeGamer / Plantronics Gamecom Headphones
PSU:	Corsair HX750w Professional Series
Software:	Windows 7 x64 Professional

Sep 17, 2008, 03:30 AM	#6
Laurijan Join Date: Feb 2007 Location: Oulu, Finland Posts: 1,935 (0.84/day) Thanks: 270 Thanked 352 Times in 282 Posts System Specs	You could also post your question in the Geil-Forum http://forum.geil.com.tw/ (seems to be down at the moment) __________________ If you want to quit smoking tobacco this is a must see: ☆☆☆The Electronic-Cigarette Club☆☆☆ @ GN.net Laurijan´s Heat My worldwide sales thread

Sep 17, 2008, 04:04 AM	#9
P4-630 Join Date: Jan 2006 Posts: 597 (0.22/day) Thanks: 37 Thanked 30 Times in 27 Posts System Specs	I found a photo on imageshack from a set of geil pc6400 ultra 4-4-4-12 and these sticks are exactly as my older 2 sticks and also these on this picture are rated at 2.1V For a comparison: My ram sticks (module at the top is a "new"(?..) one from the set I got returned yesterday): picture from imageshack (not my ram sticks) Last edited by P4-630; Sep 17, 2008 at 04:09 AM.

Sep 17, 2008, 04:04 AM	#10
intel igent Banned Join Date: Jun 2005 Location: Toronto, Canada Posts: 3,242 (1.12/day) Thanks: 453 Thanked 445 Times in 413 Posts System Specs	you have stix of RAM that are rated to 800 and are running 960 and you're complaining?

System Name:	old school / new school
Processor:	3.0e C0 @ 3.6 / e5200
Motherboard:	p4p800e-dlx / p5q-DLX
Cooling:	custom water see sig / air
Memory:	2x1g oczPC4000EbPl / 2x2g ocz2rpr1066
Video Card:	3850AGP / 4890vaporX
Hard Disk:	36g raptor+120g wd / wd 1001fals 1tb
Optical Drive:	LG x 2 / LG BluRay
CRT/LCD Model:	BenQ / sharpAQUOS LC-37D64U
Case:	modded antec plusview / generic
Sound Card:	audigy 2zs / ASUS Xonar HDAV1.3
PSU:	fan/cable modded powerstream 520 / OCZ 700mxsp
Software:	Xp pro SP2 / VISTA ultimate OEM

System Name:	The ClusterF**k
Processor:	980X @ 4212Mhz 24/7
Motherboard:	Gigabyte GA-EX58-UD5 BIOS F12
Cooling:	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory:	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24
Video Card:	Evga GTX 580
Hard Disk:	Seagate 7200.10 320GB x2 RAID0; 2 x Samsung F2 1.5TB; 1 x F1 1TB; 1 x F4 2TB
Optical Drive:	LG WH10LS30K 10X Blu-ray Burner
CRT/LCD Model:	HP LP2475w 24" 1920x1200 IPS
Case:	Technofront Bench Station
Sound Card:	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
PSU:	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software:	Win7 Ultimate N x64

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just got new ram need advice on which option	Noobcomputermaker	Motherboards & Memory	1	May 30, 2008 10:40 PM
Elpida Develops World's First Ultra-Low Voltage (1.2V) 533Mbps DDR2 Mobile RAM	malware	News	5	Oct 30, 2007 10:33 PM
RAM for P5B Deluxe : ARGHHH!	p27182	Motherboards & Memory	14	Jul 22, 2007 09:11 PM
Ram Purchase Advise Please - Want To Match My Existing Pair.	MisterE68	Motherboards & Memory	2	Feb 21, 2007 02:51 AM
2GB GEIL Value ram (512x4) timings odd.	QuantumRogue	Motherboards & Memory	8	Jul 29, 2006 05:37 PM