Cooler Master Haf XB Harley Davidson Mod

[tastegw]

ok, so i didnt win the lottery tonight, but i did win the 2 dollar prize

here goes, prepped case for hardware install

dont laugh at my temp feet !!! the real ones will get installed next time i get home

1st thing to do was the easiest thing, install my front panel fan filter behind the fans


I then installed the SSD and HDD, no photos as they cant be seen from outside anyways.
next was to slap in the PSU, ......I am not liking the single braided cables, they are a real pain in the ass due to stiffness, but anyhoot, what can i do.


next up was to lay down the motherboard tray with the mobo in it, and connect the 24 and 8 pins


my workstation for the night:


next was to apply some thermal paste, i used:

(had to take that gunk off the x60 that was preinstalled)
my grain of rice


release tha kraken!


release tha titan!





got to get those wires managed when i get back

and more misc pics


















also, got a short vid of the front panel in motion:

http://youtu.be/Vao8vqiZXlM

was unable to get windows installed tonight, was having troubles with my external br driver, may need to figure out a different approach to that one.

anyhoot, will have more photos of this finished case mod when I return in about 2 weeks, will also try and get some benchmarks in if possible.

enjoy!

[HammerON]

Looking great

[Widjaja]

Looks great!

[tastegw]

got everything installed

posting some numbers:

stock clocks on cpu
100% load temps:

idle temps (meaningless almost)


basic overclock on cpu to 4.3GHz
100% load temps:


default testing:
P12945 on 3DMark11: http://www.3dmark.com/3dm11/6411829
9035 on FireStrike (base clocks): http://www.3dmark.com/fs/376100
19611 on Catzilla (base clocks): http://i465.photobucket.com/albums/r...ps3c8cb296.png
10.26 on SuperPI 1M (base clocks): http://i465.photobucket.com/albums/r...ps8c723fb8.png

2560x1600 testing:
will update after I hook up the monitor

[tastegw]

Thinking of swapping out top window with the unused transparent amber window I have, the more I look at the etched window, the more I don't like the way I can't really see through it.

As far as hardware and stuff, everything is installed and working like a charm, it's good to know no RMA's are needed that slow things down.

Things left to to:

Install the custom feet by FannBlade (arrived)
Install backplate on Titan (arrived)
Some minor cable management
Some finishing touches on side panels: may need to bolt the layers together as my different adhesives keep failing to hold the bond.
Take it to the local HD shop and give them the finger ..I.

Return home on the first or second next month, will update then with any progress.