GPU-Z doesn't report right GPU load. - Page 2

Jstn7477 · Mar 4, 2013, 12:18 AM

Does this on all 3 of my Tahitis when Afterburner reports proper load. An NVIDIA GPU folding in the same systems reports correct GPU load, but not the AMD GPU.

Norton · Mar 4, 2013, 02:23 AM

Works fine with my 7870 (WCG crunching on GPU)

HammerON · Mar 4, 2013, 07:44 AM

Doesn't work with my three 7970's crunching (CrossFire disabled):

Didn't realize this until I saw this thread. I use AfterBurner frequently and hadn't checked GPU-Z Sensors...

Nor does it work with my three 7770's:

Norton · Mar 4, 2013, 08:52 AM

Quote:

Originally Posted by HammerON

Doesn't work with my three 7970's crunching (CrossFire disabled):
http://img.techpowerup.org/130304/Capture182.jpg

Didn't realize this until I saw this thread. I use AfterBurner frequently and hadn't checked GPU-Z Sensors...

Nor does it work with my three 7770's:
http://img.techpowerup.org/130304/Capture005.jpg

Works fine with the 3x7770's in my Xeon rig too (version 6.4).... don't have any 79xx cards to check unless someone sends me a couple

I'll load the latest version of GPUZ on that rig tonight and check it again

*Note- I use 12.6 drivers on all systems... don't know if that makes a difference?

Athlonite · Mar 5, 2013, 03:54 AM

I'm thinking it's a driver issue with catalyst 13.1 and .2 both not reporting via GPUz it used to work fine with 12.11 and earlier on my HD5770's but update the driver to 13.1 and bupkiss no load reported or if it did report it it was lower than it should have been

same goes for my HD7850 13.1 and .2 lower than expected to none at all load reporting

W1zzard · Mar 5, 2013, 06:16 PM

This will be fixed in next release (days)

Athlonite · Mar 12, 2013, 12:54 AM

Thanks Wizz 0.6.8 works perfectly load reporting now shows proper load readings whilst using F@H

AlienIsGOD · Mar 12, 2013, 01:20 AM

now if W1zzard could fix the same issue in Trixx

Mar 4, 2013, 12:18 AM	#26
Jstn7477 Join Date: Aug 2009 Location: Sarasota, Florida, USA Posts: 3,114 (2.29/day) Thanks: 384 Thanked 1,177 Times in 799 Posts System Specs	Does this on all 3 of my Tahitis when Afterburner reports proper load. An NVIDIA GPU folding in the same systems reports correct GPU load, but not the AMD GPU. __________________ Intel Crunchers (30 threads): 2x 3770K 4.3GHz, 2600K 4GHz, X3210, P-M 735A, P4 3GHz, AMD Crunchers (20 cores):FX-8150 (4t), 1100T 3.6GHz, 1045T 3.4GHz, X3 8550 2.5GHz, T64 ML-37 AMD Folders (6272 GCN cores): 2x 7950 1125/1475, 7970 1150/1650, 7770 NV Folders (2336 GF10x + 1344 GK104 cores):GTX 470 & 465 720/1715, 4x 460 768MB 825/2000, GTS 450, 660Ti 1228/6000 HEATWARE

System Name:	Awesomesauce \| Laptop (Toshiba A665D-S6091) \| "The Shoebox"
Processor:	Intel Core i7-3770K @ 4.3GHz/1.18v \| AMD PII Mobile X4 X920 @ 2.3GHz\|AMD E-350 APU
Motherboard:	ASRock Z77 Extreme6 \| NWQAE S1G4 (880G/SB850) \| Gigabyte E350N-USB3
Cooling:	Thermaltake Water 2.0 Performer, 2x Cougar CF-V12HB + 5 Rosewill RFA-120-RL
Memory:	G.Skill RJ-X 16GB DDR3-2000 CL11 \| Stock 2*2GB DDR3-1066 CL7 \| 4GB DDR3-1333
Video Card:	XFX DD HD7950 3GB 1175/1500 1.2v w/ Accelero Xtreme 7970 \| ATI MR 5650 1GB DDR3 @ 550/900 \| 6310 IGP
Hard Disk:	Mushkin Chronos 240GB + Seagate Green 2TB \| WD Scorpio Black 750GB \| Samsung F1 1TB
Optical Drive:	ASUS 24x SATA \| Sony Optiarc AD-7703S 8x Labelflash \| Samsung Writemaster 22x SATA
CRT/LCD Model:	ASUS VG236HE 23" 120Hz 1080p \| 16.0" 1366*768 LED laptop glossy LCD \| Samsung 940BW
Case:	NZXT Source 210 \| Toshiba A665D \| Rosewill MI-01-BK ITX "shoebox"
Sound Card:	Realtek ALC898 \| Realtek ALC269 with harman/kardon speakers \| Realtek ALC892
PSU:	Rosewill CAPSTONE 550w (80Plus Gold) \| 75W 19.5v brick \| Seasonic 350w ITX
Software:	Windows 7 Pro x64 + Ubuntu 12.10 \| Windows 8 Pro x64 (laptop)
Benchmarks:	120FPS in the games I play? :P

Mar 4, 2013, 02:23 AM	#27
Norton WCG Team Assistant Join Date: Dec 2011 Location: Northeast, USA Posts: 5,125 (9.95/day) Thanks: 5,358 Thanked 9,996 Times in 3,160 Posts System Specs	Works fine with my 7870 (WCG crunching on GPU) __________________ *Why sit on the Bench* when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's WCG-TPU Mothers Day Challenge (5/10 thru 5/19- crunch for our Team, for Mom, for games and prizes )**

System Name:	My Fortress/Trish (WCG #1)/Julia (WCG #2)/Junior (WCG #3)/Norton3 (WCG #4)/My Niece (WCG #5)/TBA
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/Xeon (6c/12t)/i7 920
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill Ares DDR31866/2x4GB DDR3 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/7770/HD 7870/3x HD 7770's
Hard Disk:	2xWD 640(Blue)/WD 80/WD 160/WD 320 (2.5")/WD 160(2.5")/WD VR 150GB/WD 320
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone Fortress FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/TBA
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/TX550M
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

Mar 4, 2013, 07:44 AM	#28
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,331 (2.81/day) Thanks: 3,965 Thanked 2,868 Times in 1,539 Posts System Specs	Doesn't work with my three 7970's crunching (CrossFire disabled): Didn't realize this until I saw this thread. I use AfterBurner frequently and hadn't checked GPU-Z Sensors... Nor does it work with my three 7770's: Last edited by HammerON; Mar 4, 2013 at 07:50 AM.

System Name:	Cruncher/Gamer
Processor:	i7 970
Motherboard:	ASUS Rampage III Extreme
Cooling:	H2O
Memory:	Patriot Viper Extreme 12GB 2000
Video Card:	2x VisionTek HD 7970's
Hard Disk:	OCZ Vertex 4 256GB x2 in Raid0 + WD 640GB
Optical Drive:	ASUS Blu-Ray
CRT/LCD Model:	Dell UltraSharp U3011 30"
Case:	Corsair Obsidian 800D
Sound Card:	On-board
PSU:	Corsair AX1200
Software:	Win 7 64bit
Benchmarks:	Always changing~

Mar 5, 2013, 03:54 AM	#30
Athlonite Join Date: Jan 2010 Location: Napier, New Zealand Posts: 1,386 (1.15/day) Thanks: 282 Thanked 441 Times in 345 Posts System Specs	I'm thinking it's a driver issue with catalyst 13.1 and .2 both not reporting via GPUz it used to work fine with 12.11 and earlier on my HD5770's but update the driver to 13.1 and bupkiss no load reported or if it did report it it was lower than it should have been same goes for my HD7850 13.1 and .2 lower than expected to none at all load reporting __________________

System Name:	Xtreme PC's AMDx4
Processor:	AMD Phenom II x4 965BE @ 3.41GHz NB/HT @ 2.4GHz
Motherboard:	Asus Crosshair IV Formula
Cooling:	ThermoLab Baram 1x 120mm SS Air Penartrator 1x SS generic case fan
Memory:	8GB Corsair Vengence LP 1600MHz 9-9-9-24CR1
Video Card:	Sapphire Radeon HD7850 2GB 920/1250MHz
Hard Disk:	2x Samsung HD501IJ Raid0 boot / 1x Samsung HD501IJ + 1x WD 250GB storage
Optical Drive:	1xSATA Pioneer DVR212S 18x
CRT/LCD Model:	Alienware OptX AW2210 22" LCD 1920x1080p
Case:	SilverStone Raven RV02B-W + 3x SS AP181
Sound Card:	Creative SB X-Fi Xtreme PCIe + Pioneer VSX-D457 amp
PSU:	SilverStone ST75F-P Modular 750W
Software:	Windows 7 X64 RTM
Benchmarks:	it sucks much

Mar 5, 2013, 06:16 PM	#31
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,758 (4.18/day) Thanks: 184 Thanked 10,207 Times in 3,156 Posts System Specs	This will be fixed in next release (days)

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

Mar 12, 2013, 12:54 AM	#32
Athlonite Join Date: Jan 2010 Location: Napier, New Zealand Posts: 1,386 (1.15/day) Thanks: 282 Thanked 441 Times in 345 Posts System Specs	Thanks Wizz 0.6.8 works perfectly load reporting now shows proper load readings whilst using F@H __________________

Mar 12, 2013, 01:20 AM	#33
AlienIsGOD Join Date: Aug 2008 Location: Kingston, Ontario Canada Posts: 2,576 (1.48/day) Thanks: 4,288 Thanked 1,083 Times in 617 Posts System Specs	now if W1zzard could fix the same issue in Trixx __________________ Crunching Badges Crunching Hardware CPU: i5 3570K and i5 2400 = 8 cores GPU: 7870 (8 wu's) and 7770 (4 wu's) = 1920 GCN cores (no GPU wu's atm)

System Name:	My Rig (part-time WCG) \| Wife's Rig (full-time WCG) \| L'il Man (kids lappy)
Processor:	Core i5 3570K @ 4.2 ghz 1.20 vcore \| Core i5 2400 \| Turion II P540
Motherboard:	EVGA Z77 FTW 1.21 BIOS \| AsRock Z68M/USB3 2.20 BIOS
Cooling:	CM Hyper 212 EVO R2-push/pull with 2x 120mm PWM \| CM Hyper 101i -push/pull with 2 x 80mm
Memory:	Mushkin Blackline 4GB x 2 1600mhz XMP profile \| Kingston HyperX 4GB x 2 1600mhz XMP profile \| 6GB
Video Card:	Sapphire 7870 2GB OC \| Gigabyte R7770 1GB \| HD4250
Hard Disk:	500GB OS / 500GB Data \| Kingston HyperX 120GB SSD / 2 x Seagate 500GB \| 320GB
Optical Drive:	Asus 22x DVD/CD Combo Drive \| ? \|
CRT/LCD Model:	LG Flatron IPS226 22" IPS 5ms \| Phillips 227E 22" IPS 7ms / 40" Samsung 550 LCD HDTV \| 15.6" LCD
Case:	Antec P280 \| Thermaltake Soprano Snow Edition
Sound Card:	Realtek ALC898 w/ Logitech z623 \| Realtek ALC892 w/ SB X-FI MB2 software w/ Logitech x540
PSU:	Corsair HX1000W \| Thermaltake TR2 500W
Software:	Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit
Benchmarks:	benchmarks are for noobs, real men crunch WCG for TPU \m/

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Second GPU no GPU Load reading? Please help!	goldsauce	GPU-Z	2	Jan 12, 2013 08:27 PM
GPU-Z is not showing 'GPU Load' of my 9500GT	RenanMotta	GPU-Z	7	Nov 3, 2010 04:12 PM
GPU-Z not showing GPU load on second 9800GTX+	rick5127	GPU-Z	7	Aug 22, 2010 05:15 AM
Gpu-z0.3.8 >sensor>gpu load nvdia 6200	Romeopp	GPU-Z	5	Feb 18, 2010 04:14 PM
GPU-Z not showing load for both GPU's	MortenN	GPU-Z	0	Jan 14, 2010 04:56 PM