Parvum Extreme MbK

[kier]

Parvum Extreme MbK

Sponsored by:









Hi fellow casemodders, Kier is back...again

This time I will start with a great new acrylic case
Probably you have seen it allready in the buildlogs from L3p and K.3nny, the new Parvum systems S1.0

The case is individually cut and hand assembled, various colors and custom modifications possible
When unpacking I noticed the very good quality acrylic (5mm high quality acrylic) ... very hard material to work with, but not impossible, more on this later. The layout is also beautifully engineered.

The case is available from mid-March @ Highflow Parvum Systems S1.0 White
And @ http://www.overclockers.co.uk/showpr...odid=CA-000-PS

How it all started:

After missing the postman two times it finally happened. A BIG package:



Very well packed



Hmm 2??? yes 2 Want to build something extreme.





My kid really would like to know what it contains and whether it is for him .... unfortunately for him, these are for me



Little picture with it from the two cases stacked.



And a warning just in case ...



A nice thank you letter from the Parvum family





The black and white case with the following specifications:

- Materials: Acrylic
- Colours: Black/White
- Dimensions (WxHxD): 275 x 305 x 420mm
- Maximum CPU Cooler Height: 152mm
- Motherboard Sizes: mATX
- 3.5" Drive Bays: 2
- 2.5" Drive Bays: 4
- Cooling Front: 2 x 120mm
- Cooling Rear: 3 x 80mm
- Cooling Top: 2 x 120mm
- PCI Slots: x 4















4x PCI slots



PSU opening



Air outlet for the PSU



Front fanholes







And more 80mm fanholes at the back







The mATX mobo tray, a hand bent acrylic mid-wall. Provides both case strength and the cable management



With openings for the cables and possibly tubes



The second case is slightly different internally and externally then the first original. Because I'm planning some fun stuff with this

However, both with window



Front is the same





Furthermore the second case is empty, because I need only 1 hardware section. It is also slightly different at the back. 2x 120mm fanholes in the middle



Also there were some nice extras in the package like:

Case feets





Some beautiful 240mm radgrills.





And a 160mm radgrill.



I also asked for some extra rest material for various purposes.



Extra mounting stuff.



Some last shots of the cases together







To be continued

[micropage7]

great base, nice case
im wondering how you gonna mod it
but sub first for great project

[kier]

Update

Sponsored by:









Thanks for the comment... and now modding time

The idea is to stack everything. The bottom with the hardware, then the radiators and on top the reservoirs
So Rads + fans on the original part of the Parvum





To reinforce the lower part a bit i've placed some aluminum strips. Just to be sure





Used the existing cubes to mount the next layer.



On each corner



Cut some side panels to the right size and an opening for the fans



Like this



And cut two pieces black and white. Black has the same same shape as the original front below.
In this there will come an Asus ROG logo



Placed the radiators. Still need to make brackets for these



Also placed the fans



Looks good allready I think











ROG logo will be added later



For the back I have cut 2 panels with fanholes to the right size



And placed it







Testing the fans and gives me a nice shot





And we continue with the next layer



These will be all around with windows except the back. It will be the same height as the radiator layer.

[kier]

Update

Sponsored by:







This weekend received some great products for the build of Parvum from EKWB



Thanks Niko,



2x EK Coolstream XT 360













2 beautiful EK-RES X3 250















Some extra EK-RES X3 - Multiport TOPs



And EK-RES X3 - TOPs to try something out





Also some nice EK-FC7870 Nickel plexi water blocks























And offcourse the EK-FC7870 black backplates







Next update coming right up

[kier]

Update

Sponsored by:









So my modding friends time to end this Easter weekend with a big update.

Asus also joined the party for this build. And they have send me a great motherboard.



Btw. I have expanded my photo gear so the pictures will look like a bit different than normal

The Asus Maximus V Gene



The accessoreis:







And the beautifull motherboard



•LGA1155 socket for 3rd generation Intel® Core™ processor-based platform and 2nd Generation Core™ i7/ i5/ i3/ Pentium® / Celeron® Processors
•Intel® Z77 Express Chipset
•SupremeFX III - Supreme Sound
•GameFirst / Intel Gb LAN – Frag Without Lag
•mPCIe Combo – Give Your PC A Power Up!
•NIVIDIA® SLI™ / AMD CrossFireX™ Technology Support
•LucidLogix Virtu MVP - Up to 60% Hybrid Graphics Boost



















Thanks Sven

Also placed the EKWB EK-FC7870 onto the GPU's.













Placed the nice FC7870 backplates







Time for some modding. Om top of the Parvum I placed the resevoirs, with here and there some acrylic tubes





The outlets



The inlets and one of the fill ports



Everything straight



And a total shot



Placed top and mobo



















Installed the EK-Supremacy. Did some brainstorming for the tubes



CPU outlet to the GPU inlet





Then go right







Placed the pump about as posted on the HDD cage, more about this later









To hide the HDD/ SSD I have cut some acrylic. Also filed and polished





Glued together with ACRIFIX









Just a few more.









Placed the pump onto the last plate.







This week I will receive the last panels for the top after this it's time to do some last things
sleeving and connect all the tubes.

Grtz.

[de.das.dude]

sub

[tastegw]

Nice case!

[N3trox]

This is some excellent work, subbed and cant wait to see more.

[bludragon]

beautiful work congratulations

[kier]

Thanks y'all

Update

Sponsored by:









It took a while but here it is... the long awaited update:

First my thanks goes to Freddy for nice discounts on the so important adapters / fittings and other stuff.







Mayhems Pastel - Red



Bitspower 2xG1/4" Fillport



Bitspower G1/4 Matt Black 90 Degree



Bitspower G1/4 Matt Black Multi-Transfer Adapter





EK-PSC Adapter 90 degree



And offcourse the Bitspower Multi-Link C47 Adapters

I also got the last custom panels from Parvum systems

Top side panels with window



And with made by kier in it



Front also with window



A beautiful ROG logo in the front





And a big window on top



Side windows I allready had, but just nice to show when everything is in it



Total shot



Time to connect





Placed the 2e radiator with fans and the fittings/ adapters







Front (Used silver for lack of ...)





Added some red details







Other side was a bit tricky, but made a panel ​​to hide some cables



Then....

Filling!!!

Put a roll of toilet paper in the case and here we go

Great color red







Let it run for a while. And no leakage

Here the pics of a filled Parvum case...Extreme





























































That's it for this sunday

[adulaamin]

Beautiful!!!

[kier]

Final Update

Sponsored by:









Here are the final pics my modding friends, sit back and enjoy





















Lets go outside











Power on









































































My apologies for the huge amount of pictures...but I couldn't choose

Special thanks goes to:

Justin from Parvum systems

Freddy from Highflow

Niko from EKWB

Sven from Asus

You guys are the best

And thanks y'all for the great comments