Post your 3dMark 06 and Vantage HD 5xxx Series Results - Page 2

BraveSoul · Oct 21, 2009, 05:23 PM

Quote:

Originally Posted by SonDa5

Give me a link for down load and I'll try it out.

I didn't post screen shot because I didn't want to OP to post my good scores. Once I get a nice OC on the HD5850 I'll post a screen shot of my score so I can get on the list.

if u r asking for download of snipetool, dont have to, its windows program just type it in ur start menu search bar, then u can upload it to techpowerup image hosting lets see what u got

freaksavior · Oct 21, 2009, 09:12 PM

two that are not getting posted until done correctly. This is exactly what happened to the last thread like this i made.

SonDa5 · Oct 22, 2009, 12:44 AM

Not proper format.

SonDa5 · Oct 22, 2009, 01:57 AM

Not proper format.

freaksavior · Oct 22, 2009, 04:12 AM

please take note. If it is not submitted like this
http://forums.techpowerup.com/showpo...45&postcount=3
I will not post your score.

SonDa5 · Oct 22, 2009, 06:05 AM

Quote:

Originally Posted by freaksavior

please take note. If it is not submitted like this
http://forums.techpowerup.com/showpo...45&postcount=3
I will not post your score.

I understood you the first time. I'm not sure how to do it like that. Hwbot is accepting my score so it is all good.

trt740 · Oct 22, 2009, 03:37 PM

Quote:

Originally Posted by freaksavior

please take note. If it is not submitted like this
http://forums.techpowerup.com/showpo...45&postcount=3
I will not post your score.

okay but a whole bunch of 5850 won't get posted because gpuz doesn't read their overclocked clocks

http://forums.techpowerup.com/showth...100347&page=64

wolf · Oct 22, 2009, 03:41 PM

same with my 2 Vantage runs, GPU-Z doesnt show my OC speeds at all, which is why I listed them for the actual score.

freaksavior · Oct 22, 2009, 03:43 PM

ohh okay, my bad. TRT why did you delete your post?

trt740 · Oct 22, 2009, 03:44 PM

Quote:

Originally Posted by freaksavior

ohh okay, my bad. TRT why did you delete your post?

I didn't follow the rules

good luck all 5770 coming tomorrow. Will post it's unlocked bios for one and all.

BraveSoul · Oct 22, 2009, 05:09 PM

i up the voltage with MSI Burner, and set speed with AMD GPU Clock Tool and GPU-Z 3.6 reads them fine///bios is stock

SonDa5 · Oct 22, 2009, 05:17 PM

Quote:

Originally Posted by BraveSoul

i up the voltage with MSI Burner, and set speed with AMD GPU Clock Tool and GPU-Z 3.6 reads them fine///bios is stock

That worked for me as well.

musek · Oct 22, 2009, 06:16 PM

Is it just me or my results are quite shitty?
And - am I the only one who does not OC my card?

3dmark06
20426 - musek - Core 2 Quad Q9550 @ 3.7ghz - 5870 @ stock Windows 7 (x64)

Vantage
P15973 - musek - Core 2 Quad Q9550 @ 3.7ghz - 5870 @ stock Windows 7 (x64)

SonDa5 · Oct 22, 2009, 06:32 PM

Quote:

Originally Posted by musek

Is it just me or my results are quite shitty?
And - am I the only one who does not OC my card?

That looks about right. With some over clocking you should see some nice improvements.

musek · Oct 22, 2009, 06:38 PM

Yeah, now I know that my CPU score is much lower than others. And I thought that I have a good CPU

I don't want to OC my card. There's absolutely no need for now.

wolf · Oct 22, 2009, 06:44 PM

Quote:

Originally Posted by musek

am I the only one who does not OC my card?

Yes.

Yes you are.

Welcome to TPU

musek · Oct 22, 2009, 06:47 PM

I'm a TPU and TPU-forum reader for quite a long time now (around 3-4 years). Just recently decided to drop you all some of my skillless english input.

And i enjoy it a lot!

wolf · Oct 22, 2009, 06:51 PM

Quote:

Originally Posted by musek

I'm a TPU and TPU-forum reader for quite a long time now (around 3-4 years). Just recently decided to drop you all some of my skillless english input.

And i enjoy it a lot!

yeah I noticed you've got a few posts under your belt, just thought I'd throw in that overclocking is something we do a lot here

and 'a lot' is about as understated as it gets.

musek · Oct 22, 2009, 07:07 PM

Quote:

Originally Posted by wolf

yeah I noticed you've got a few posts under your belt, just thought I'd throw in that overclocking is something we do a lot here

and 'a lot' is about as understated as it gets.

Well, an ancient chinese proverb says - My postcount is just a measure of my ignorance.

And about OC - right now I'm finished with my CPU, card is fast enough for pretty much anything right now. :P When the time comes - I'll treat it right.

Nick [D]vB · Oct 23, 2009, 02:04 AM

3DMark06: 19182 - Nick [D]vB - PhenomII X3 720BE@3.6GHz - DDR2-1150 - 5850 @ 1001MHz Core 1250MHz Mem - WindowsXP (32bit)

Vantage: P13819 - Nick [D]vB - PhenomII X3 720BE@3.6GHz - DDR2-1150 - 5850 @ 1001MHz Core 1250MHz Mem - VistaSP1 (64bit)

Anyone think it might be CPU limited ???

SonDa5 · Oct 23, 2009, 05:45 AM

Currently top of the list on the clock speeds for Vantage at HWbot.
Clocks 1075/1300

http://hwbot.org/result.do?resultId=912242

Vantage score is P18,289 which puts me in 6th place single HD5850 at the HWbot rankings right now.

BraveSoul · Oct 23, 2009, 06:05 AM

Quote:

Originally Posted by musek

Is it just me or my results are quite shitty?

i get similar GPU score after crazy overclocking so i think u r doing good

Quote:

Originally Posted by Nick [D]vB

Anyone think it might be CPU limited ???

hey Nick ,, good to see some tripple core action

being cpu limited? o yeah

Vantage aside, when it comes to gaming its all about that GPU power, most of the time :0)
what is ur favorite 4x4 game|what video cards have you owned

musek · Oct 23, 2009, 07:35 AM

Well... I couldn't resist.

Vantage
P16317 - musek - Core 2 Quad Q9550 @ 3.7ghz - 5870 @ 900 core | 1300 mem - Windows 7 (x64)

PS. It might be a n00b question but why am I not able to push the card harder than 900/1300 with MSI Afterburner? I thought that Catalyst were limited only.

wolf · Oct 23, 2009, 10:27 AM

Quote:

Originally Posted by musek

Well... I couldn't resist.

http://img.techpowerup.org/091023/OC_vantage.png
Vantage
P16317 - musek - Core 2 Quad Q9550 @ 3.7ghz - 5870 @ 900 core | 1300 mem - Windows 7 (x64)

PS. It might be a n00b question but why am I not able to push the card harder than 900/1300 with MSI Afterburner? I thought that Catalyst were limited only.

Nobody ever can resist!

Ok so the bios on your card in conjunction with CCC will limit you to 900/1300, which for you sounds A'ok, what most people that want to OC are doing (myself included) is flashing the Asus 5870 'voltage tweak' bios onto it, which has limits of 1200mhz core 1400mhz memory.

Link to guide;

http://forums.overclockers.co.uk/sho...44&postcount=1

So easy to follow. But there is an element of risk involved, so you in particular might want to weight up if its worth it or not

SonDa5 · Oct 23, 2009, 04:40 PM

Musek you don't have to flash your bios.

Download AMD GPU clock Tool.

http://techpowerup.com/downloads/164...r_HD_5870.html

Then use it to set your frequencies.
Use MSI AFter Burnier 1.3.0 to conrol your voltage.
Use the Catylst Control for 3d settings.

System Name:	Air Filtration Tower \| HTPC \|
Processor:	i5 2500k@4.2ghz \| Phenom2 x4@3.6ghz
Motherboard:	MSI Z68 GD80 \| Gigabyte790GP
Cooling:	Noctua14
Memory:	Mushkin 1600 4gbs
Video Card:	Gigabyte GTX670\| 5850
Hard Disk:	intel ssd 220gbs
CRT/LCD Model:	Samsung 24" \| tv
Sound Card:	onboard
PSU:	500w
Benchmarks:	3dmark11 P5100 :CPU: i5 2500k@4.6ghz 5850@1027/1100

Oct 21, 2009, 09:12 PM	#27
freaksavior To infinity ... and beyond! Join Date: Dec 2006 Location: H-Town Texas Posts: 6,780 (2.88/day) Thanks: 1,031 Thanked 852 Times in 581 Posts System Specs	two that are not getting posted until done correctly. This is exactly what happened to the last thread like this i made. __________________ Heat My HTPC Guide freak's F/S thread Fill Out you sp here.

System Name:	0 Kelvin 5.0 / Server
Processor:	i7 930 \|\| Q6600
Motherboard:	EVGA Micro X58\|\| Asus Rampage Formula x48
Cooling:	Mugen2 \|\| Rocketfish
Memory:	6Gb Crucial Value 1800mhz\|\| 4gb Patriot SLI
Video Card:	2x Asus 5850CU 800/1200 \|\| ATI 6450
Hard Disk:	Intel 320 80gb SSD + 72.11 750Gb \|\| 3 x 2tb Sea + 2 x 500gb WD B
Optical Drive:	Samsung SH-S203N \|\| None
CRT/LCD Model:	2x Samsung 245BW \|\| Samsung 40" 650A
Case:	NZXT Rogue \|\| CM690
Sound Card:	Onboard \|\| ATI 6450
PSU:	8Silverstone DA800 \|\| Kingwin 1000w
Software:	7U x64 \|\| Windows 7
Benchmarks:	http://i99.photobucket.com/albums/l294/freaksavior/Overclocking-1.png

Oct 22, 2009, 12:44 AM	#28
SonDa5 Join Date: Aug 2008 Posts: 1,405 (0.80/day) Thanks: 209 Thanked 282 Times in 182 Posts System Specs	Not proper format. Last edited by SonDa5; Oct 22, 2009 at 03:58 PM.

System Name:	Black Killing Machine
Processor:	Delidded NO IHS mount Intel i7-3770k
Motherboard:	MSI Z77 MPower
Cooling:	Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory:	30nm Wonder Green 8GB Sammy set
Video Card:	SAPPHIRE HD7950 OC 950mhz Edition
Hard Disk:	2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Optical Drive:	LG 12X BD burner
CRT/LCD Model:	Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case:	SilverStone Raven rv-02
Sound Card:	Audio Technica AD700 headphones, Topping D2 DAC/Headphone AMP
PSU:	Seasonic Platinum 860
Software:	Windows 7 Pro 64bit
Benchmarks:	http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/show_oc.php?id=25793

Oct 22, 2009, 01:57 AM	#29
SonDa5 Join Date: Aug 2008 Posts: 1,405 (0.80/day) Thanks: 209 Thanked 282 Times in 182 Posts System Specs	Not proper format. Last edited by SonDa5; Oct 22, 2009 at 03:57 PM. Reason: follow rules

Oct 22, 2009, 04:12 AM	#30
freaksavior To infinity ... and beyond! Join Date: Dec 2006 Location: H-Town Texas Posts: 6,780 (2.88/day) Thanks: 1,031 Thanked 852 Times in 581 Posts System Specs	please take note. If it is not submitted like this http://forums.techpowerup.com/showpo...45&postcount=3 I will not post your score. __________________ Heat My HTPC Guide freak's F/S thread Fill Out you sp here.

Processor:	Intel 2500K Sandy Bridge 4.9ghz 1.384v 24/7 5.0ghz whenever
Motherboard:	Asus Sabertooh 1155 motherboard rev.3.0
Cooling:	Pro Meg 79CF120mm x2 fans,200mm front intake fan, 200 mm top fan, 120mm rear fan,140 mm PSU fan
Memory:	8GB Mushkin Redline 240-Pin DDR3 SDRAM DDR3 1600 6 8 6 24 t1
Video Card:	OEM GTX660 1.5GB
Hard Disk:	Wester Digital Black Edition 32MB 7200 RPM 1TB SATA 3.0 ,CAVALIER SE 16MB 640GB SATA 3.0 DRIVE
Optical Drive:	1 BLACK LG DVD BURNERS
CRT/LCD Model:	BLACK ASUS LCD 24 inch monitor 1080P x1920
Case:	Corsair Obsidian Series 650D black brushed aluminum and steel case
Sound Card:	Sound Blaster Live 24 bit 7.1
PSU:	Thermaltake 850 watt SLI 140mm silent fan Tough Power
Software:	Windows 7 Ultimate 64

Oct 22, 2009, 03:41 PM	#33
wolf Performance Enthusiast Join Date: May 2007 Location: Enrichment Center for Aperture Laboratories Posts: 5,312 (2.41/day) Thanks: 1,676 Thanked 844 Times in 707 Posts System Specs	same with my 2 Vantage runs, GPU-Z doesnt show my OC speeds at all, which is why I listed them for the actual score. __________________ “my goal is speed, full ultra, and extreme gaming” -Ephraim “Yeah you can always overclock the 2gb memory to 4gb” -jaredpace

System Name:	MightyX (M-ITX)
Processor:	Core i5 2500K
Motherboard:	Giga H67N-USB3-B3
Cooling:	CoolerMaster Vortex+
Memory:	8gb Geil Corsa 1333
Video Card:	Asus GTX670 DCII oc
Hard Disk:	Corsair Force 3 120gb
Optical Drive:	Zalman ZM-MFC2
CRT/LCD Model:	LCD @ 1080P +TV
Case:	Lain Li PC-Q08B
PSU:	Corsair HX620W

Oct 22, 2009, 03:43 PM	#34
freaksavior To infinity ... and beyond! Join Date: Dec 2006 Location: H-Town Texas Posts: 6,780 (2.88/day) Thanks: 1,031 Thanked 852 Times in 581 Posts System Specs	ohh okay, my bad. TRT why did you delete your post? __________________ Heat My HTPC Guide freak's F/S thread Fill Out you sp here.

Oct 22, 2009, 05:09 PM	#36
BraveSoul Join Date: Jul 2008 Location: New York Posts: 954 (0.54/day) Thanks: 307 Thanked 166 Times in 144 Posts System Specs	i up the voltage with MSI Burner, and set speed with AMD GPU Clock Tool and GPU-Z 3.6 reads them fine///bios is stock

Oct 22, 2009, 06:16 PM	#38
musek Join Date: Nov 2007 Location: Europe -> Poland... Posts: 356 (0.18/day) Thanks: 46 Thanked 57 Times in 53 Posts System Specs	Is it just me or my results are quite shitty? And - am I the only one who does not OC my card? 3dmark06 20426 - musek - Core 2 Quad Q9550 @ 3.7ghz - 5870 @ stock Windows 7 (x64) Vantage P15973 - musek - Core 2 Quad Q9550 @ 3.7ghz - 5870 @ stock Windows 7 (x64) __________________ CPU-Z validation sig pics temporarily blocked Last edited by musek; Oct 22, 2009 at 06:29 PM.

System Name:	Notebook HP EliteBook 8460p
Processor:	Intel i5 2410
Memory:	4GB DDR3
Video Card:	Intel HD Graphics 3000
Hard Disk:	Some 250GB 7200rpm HDD
CRT/LCD Model:	LG W2452V-PF 24" lcd
Software:	Ubuntu 11.11 \| Win 7 Professional

Oct 22, 2009, 06:38 PM	#40
musek Join Date: Nov 2007 Location: Europe -> Poland... Posts: 356 (0.18/day) Thanks: 46 Thanked 57 Times in 53 Posts System Specs	Yeah, now I know that my CPU score is much lower than others. And I thought that I have a good CPU I don't want to OC my card. There's absolutely no need for now. __________________ CPU-Z validation sig pics temporarily blocked

Oct 22, 2009, 06:47 PM	#42
musek Join Date: Nov 2007 Location: Europe -> Poland... Posts: 356 (0.18/day) Thanks: 46 Thanked 57 Times in 53 Posts System Specs	I'm a TPU and TPU-forum reader for quite a long time now (around 3-4 years). Just recently decided to drop you all some of my skillless english input. And i enjoy it a lot! __________________ CPU-Z validation sig pics temporarily blocked

Oct 23, 2009, 02:04 AM	#45
Nick [D]vB Join Date: Sep 2009 Posts: 189 (0.14/day) Thanks: 77 Thanked 26 Times in 23 Posts	3DMark06: 19182 - Nick [D]vB - PhenomII X3 720BE@3.6GHz - DDR2-1150 - 5850 @ 1001MHz Core 1250MHz Mem - WindowsXP (32bit) Vantage: P13819 - Nick [D]vB - PhenomII X3 720BE@3.6GHz - DDR2-1150 - 5850 @ 1001MHz Core 1250MHz Mem - VistaSP1 (64bit) Anyone think it might be CPU limited ??? Last edited by Nick [D]vB; Oct 23, 2009 at 03:29 AM.

Oct 23, 2009, 05:45 AM	#46
SonDa5 Join Date: Aug 2008 Posts: 1,405 (0.80/day) Thanks: 209 Thanked 282 Times in 182 Posts System Specs	Currently top of the list on the clock speeds for Vantage at HWbot. Clocks 1075/1300 http://hwbot.org/result.do?resultId=912242 Vantage score is P18,289 which puts me in 6th place single HD5850 at the HWbot rankings right now.

Oct 23, 2009, 07:35 AM	#48
musek Join Date: Nov 2007 Location: Europe -> Poland... Posts: 356 (0.18/day) Thanks: 46 Thanked 57 Times in 53 Posts System Specs	Well... I couldn't resist. Vantage P16317 - musek - Core 2 Quad Q9550 @ 3.7ghz - 5870 @ 900 core \| 1300 mem - Windows 7 (x64) PS. It might be a n00b question but why am I not able to push the card harder than 900/1300 with MSI Afterburner? I thought that Catalyst were limited only. __________________ CPU-Z validation sig pics temporarily blocked

Oct 23, 2009, 04:40 PM	#50
SonDa5 Join Date: Aug 2008 Posts: 1,405 (0.80/day) Thanks: 209 Thanked 282 Times in 182 Posts System Specs	Musek you don't have to flash your bios. Download AMD GPU clock Tool. http://techpowerup.com/downloads/164...r_HD_5870.html Then use it to set your frequencies. Use MSI AFter Burnier 1.3.0 to conrol your voltage. Use the Catylst Control for 3d settings.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post your 3dMark06 (and Vantage) HD 4K Series Results	freaksavior	AMD / ATI	544	Sep 17, 2009 12:32 PM
Post your 3dmark06 HD 3K Series Results	freaksavior	AMD / ATI	2233	Feb 9, 2009 03:41 PM
3DMark Vantage Results	spy_web314	Graphics Cards	4	Oct 11, 2008 06:04 AM
Post your 3dmark Vantage Scores	candle_86	Graphics Cards	437	Aug 31, 2008 10:01 PM
PhysX 3DMark Vantage results	MrMilli	Graphics Cards	8	Apr 30, 2008 08:58 AM