Modding the rocketfish for water

[cdawall]

parts i plan on ordering monday





the case is the lian li RF i plan on putting the 480rad in the top and the 360rad in the side panel at the bottom. i have a possibly working laing D4 and then i'm ordering a D5 as well the pair should be ok pushin water thru the loop. i already have ~20ft of 1/2x5/8" black tubing and have a fuzion V1 on the way.

any suggestions from anyone i will throw a CAD drawing up of it tonight. oh and yes i have a 360 and 480 just to cool the CPU there is a reason for this don't question it

[overclocking101]

the 4X120 will fi in the top but you will have to get rid of your usb and audio ports. I have my 420 hanging off the back and my 320 on the top, but you can easily mod both to fit inside, it just depends on what you are ok with getting rid of, personally, I got rid of: i/o ports, 3.5 inch bays, 1 HDD rack, opening front door, ans 2 5.25 bays. I also added a mirror finish divider in the case to separate the psu/pump/HDD's from the rest of the system.

EDIT: also can get pics of mine just to show you if you wish

[cdawall]

Planning on mounting the 360 sideways in the bottom it'll barely fit