Serious Find Max Core and Mem Problem!

dicksonpk · Jul 6, 2006, 08:06 PM

I am using HIS X1800GTO IceQ3 and ATITool 0.25 Beta 14
I want to overclock it
so I press Find Max Core(Mem Speed is at default)
I know that if the core is unstable at that speed or artifacts are found
the core speed will slow down until it becomes stable
But my ATITool will not slow down the core speed even artifacts are found
it will continue overclock until the system is crashed
I have uninstalled the old ATITool and download a new one from this website

http://www.techpowerup.com/downloads/259

But the problem still remains unchanged even on the new ATITool
And the same problem also happened on Find Max Mem

Who can help me solve the problem???PLX>_<"

POGE · Jul 6, 2006, 08:23 PM

Dont triple post... :|

dicksonpk · Jul 13, 2006, 03:52 AM

Please help me>_<

warup89 · Jul 13, 2006, 06:45 AM

It always did the same for me; the only thing i do is to stop the OC when i start seeing artifacts, and lower the core by 5 hertz, then i raise the gpu Voltage a bit (.20V)and start the max thingy again. Always remember to run ur fans at 85% when OCing (and always keep it like that afterwards)

dicksonpk · Jul 13, 2006, 03:20 PM

Quote:

Originally Posted by warup89

It always did the same for me; the only thing i do is to stop the OC when i start seeing artifacts, and lower the core by 5 hertz, then i raise the gpu Voltage a bit (.20V)and start the max thingy again. Always remember to run ur fans at 85% when OCing (and always keep it like that afterwards)

THANKS~

But the whole process,Find Max Core, is auto.
Do your ATITool lower the core automatically after detecting any artifacts??
What graphic card are you using??

infrared · Jul 13, 2006, 03:32 PM

what version of atitool is it? Some of the 0.25 beta versions don't stop raising the clock speeds.

Try downloading either 0.24 or 0.25 beta 9/10 They all work correctly for x800/x850 series cards

http://www.techpowerup.com/downloads/Tweaking/ATITool

that should solve the problem

dicksonpk · Jul 13, 2006, 04:07 PM

Quote:

Originally Posted by infrared

what version of atitool is it? Some of the 0.25 beta versions don't stop raising the clock speeds.

Try downloading either 0.24 or 0.25 beta 9/10 They all work correctly for x800/x850 series cards

http://www.techpowerup.com/downloads/Tweaking/ATITool

that should solve the problem

Thanks you for your help^^

I am using 0.25 Beta14 which is the newest and support X1800 series.
And also I am using X1800GTO but not X800/X852 series.

Urlyin · Jul 13, 2006, 04:32 PM

try reading some of this review with some tips .. here

dicksonpk · Jul 13, 2006, 04:59 PM

At this point you should be familiar with stopping the correct services, change voltage to 3D clocks and change the clocks themselves. Often, but not always the 'Find Max' will lock the system up, this is not a show stopper and can be to your benefit. Now you know at which speed the card is no longer stable. As shown below when we restart ATITool it tells us at what speed the tool crashed.

I don't know what exactly it means.

warup89 · Jul 13, 2006, 05:05 PM

i have an x1800xt, but i tried that same version of atitool on and x1800xl too and it doesnt lower the clock when artifacting.

dicksonpk · Jul 13, 2006, 06:16 PM

Quote:

Originally Posted by warup89

i have an x1800xt, but i tried that same version of atitool on and x1800xl too and it doesnt lower the clock when artifacting.

Does your ATItool show any temperatures and voltage control??

warup89 · Jul 13, 2006, 06:17 PM

yeah 1 for GPU and 2 for mem

pt · Jul 13, 2006, 06:26 PM

My powercolor x1800GTO don't show anything in Atitool, Voltage, fan control and temps. If you need to check the Temps, voltages and fan speed use Rivatuner

warup89 · Jul 13, 2006, 09:34 PM

thats really weird, because i used ATItool on a x1800xl (closest cousing to the GTO) and it showied me everything.

infrared · Jul 13, 2006, 09:38 PM

that is weird, i've never come across an x1k series card that doesn't show temperature in atitool. Yeah, see if rivatuna works.

btw, warup, getting my wages this saturday, i'll go streight to the bank on monday and i should have enough for the x850cf

thanks for being patient.

warup89 · Jul 13, 2006, 09:41 PM

yeah if rivatuner works, then stick with it

.

-and alright man, i have the card ready for you

pt · Jul 13, 2006, 09:43 PM

Rivatuner works fine and shows everything but can't change voltages (not that i want)

dicksonpk · Jul 14, 2006, 01:57 PM

Quote:

Originally Posted by pt

My powercolor x1800GTO don't show anything in Atitool, Voltage, fan control and temps. If you need to check the Temps, voltages and fan speed use Rivatuner

Me too!!
I can't find any voltage control,fan control and temperature in my ATITool!!!
What is the problem??

pt · Jul 14, 2006, 03:06 PM

perhaps in the next version of ATITOOL, meanwhile use Rivatuner

Jul 6, 2006, 08:06 PM	#1
dicksonpk Join Date: Jul 2006 Posts: 9 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Serious Find Max Core and Mem Problem! I am using HIS X1800GTO IceQ3 and ATITool 0.25 Beta 14 I want to overclock it so I press Find Max Core(Mem Speed is at default) I know that if the core is unstable at that speed or artifacts are found the core speed will slow down until it becomes stable But my ATITool will not slow down the core speed even artifacts are found it will continue overclock until the system is crashed I have uninstalled the old ATITool and download a new one from this website http://www.techpowerup.com/downloads/259 But the problem still remains unchanged even on the new ATITool And the same problem also happened on Find Max Mem Who can help me solve the problem???PLX>_<"

Processor:	Turion 64 ML-34 1.8Ghz
Motherboard:	Compaq Laptop Mobo
Cooling:	Stock Compaq Laptop Fan
Memory:	1x 256 DDR333
Video Card:	Radeon 200m
Hard Disk:	40GB 5200RPM HP
Optical Drive:	HP CDRW/DVD Combo Drive
CRT/LCD Model:	Stock Laptop LCD
Case:	Laptop Case
Sound Card:	Onboard Realtek
PSU:	Stock Laptop Powerbrick
Software:	Windows XP Pro

Jul 13, 2006, 06:45 AM	#4
warup89 Join Date: Mar 2006 Location: FL Posts: 1,005 (0.38/day) Thanks: 107 Thanked 103 Times in 82 Posts System Specs	It always did the same for me; the only thing i do is to stop the OC when i start seeing artifacts, and lower the core by 5 hertz, then i raise the gpu Voltage a bit (.20V)and start the max thingy again. Always remember to run ur fans at 85% when OCing (and always keep it like that afterwards) __________________ HeatWare eBay

System Name:	-=Defiance=-
Processor:	I7 SB 2600k @ 4.8
Motherboard:	Asrock p67 Fatal1ty
Cooling:	Corsair H70, x5 120mm
Memory:	16gb Corsair Vengeance 1600
Video Card:	x2 XFX HD6950 2gb @ stock [Unlocked shaders]
Hard Disk:	SSD: 60gb OCZ agility2 & Crucial C300 64gb HHD: WD 750gb
Optical Drive:	Asus DVD-+RW
CRT/LCD Model:	Acer 22" Widecreen
Case:	Fractal Design R3
Sound Card:	Onboard
PSU:	Thermaltake toughpower 1200wtt
Software:	Windows 7 Ultimate 64b

Jul 13, 2006, 03:32 PM	#6
infrared Join Date: May 2005 Location: Southampton, UK Posts: 2,878 (0.99/day) Thanks: 233 Thanked 185 Times in 156 Posts System Specs	what version of atitool is it? Some of the 0.25 beta versions don't stop raising the clock speeds. Try downloading either 0.24 or 0.25 beta 9/10 They all work correctly for x800/x850 series cards http://www.techpowerup.com/downloads/Tweaking/ATITool that should solve the problem __________________ I don't suffer from insanity - I enjoy every minute of it!

Jul 6, 2006, 08:23 PM	#2
POGE Join Date: Oct 2005 Location: In banjo's Goats. Posts: 1,387 (0.50/day) Thanks: 3 Thanked 35 Times in 23 Posts System Specs	Dont triple post... :\|

Jul 13, 2006, 03:52 AM	#3
dicksonpk Join Date: Jul 2006 Posts: 9 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Please help me>_<

Processor:	E8400 E0 @ 4.5GHz 1.43v (563x8)
Motherboard:	Asus P5Q Deluxe
Cooling:	AC Freezer 7 Pro; ThermalRight HR-03 Plus (both lapped)
Memory:	4GB G.Skill PI pc2-8800 @ 1126MHz 1:1 5-5-5-12 1.8v
Video Card:	XFX GTX280 :)
Hard Disk:	2x 750GB WD Caviar SE16's in RAID 0
Optical Drive:	LG 8x Blu-ray RW
Case:	Antec 900
PSU:	Tt Purepower 680w
Software:	Windows 7 Ultimate
Benchmarks:	9.281s superpi 1M @ 5ghz 15300 vantage

Jul 13, 2006, 04:32 PM	#8
Urlyin Senior Moderator Join Date: Aug 2004 Posts: 2,133 (0.67/day) Thanks: 61 Thanked 124 Times in 77 Posts	try reading some of this review with some tips .. here

Jul 13, 2006, 04:59 PM	#9
dicksonpk Join Date: Jul 2006 Posts: 9 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	At this point you should be familiar with stopping the correct services, change voltage to 3D clocks and change the clocks themselves. Often, but not always the 'Find Max' will lock the system up, this is not a show stopper and can be to your benefit. Now you know at which speed the card is no longer stable. As shown below when we restart ATITool it tells us at what speed the tool crashed. I don't know what exactly it means.

Jul 13, 2006, 05:05 PM	#10
warup89 Join Date: Mar 2006 Location: FL Posts: 1,005 (0.38/day) Thanks: 107 Thanked 103 Times in 82 Posts System Specs	i have an x1800xt, but i tried that same version of atitool on and x1800xl too and it doesnt lower the clock when artifacting. __________________ HeatWare eBay

Jul 13, 2006, 06:17 PM	#12
warup89 Join Date: Mar 2006 Location: FL Posts: 1,005 (0.38/day) Thanks: 107 Thanked 103 Times in 82 Posts System Specs	yeah 1 for GPU and 2 for mem __________________ HeatWare eBay

Jul 13, 2006, 06:26 PM	#13
pt not a suicide-bomber Join Date: Mar 2006 Location: Portugal Posts: 5,877 (2.23/day) Thanks: 106 Thanked 219 Times in 193 Posts System Specs	My powercolor x1800GTO don't show anything in Atitool, Voltage, fan control and temps. If you need to check the Temps, voltages and fan speed use Rivatuner __________________ [img disabled]http://apax.eveonlinekb.com/?a=sig&i=39051&s=zealot[/img]

Processor:	AMD Turion 64 X2 Mobile TL-60 (Trinidad)
Motherboard:	ASUS F3Ka (ATI RS690M)
Cooling:	stock
Memory:	Nanya 2x1GB ddr2 667@5-5-5-15-2T
Video Card:	ATI Mobility Radeon HD2600 512MB DDR2@ 580mhz/486mhz
Hard Disk:	160GB on laptop+250GB external
Optical Drive:	DVD RW
CRT/LCD Model:	ASUS 15.4
Case:	Asus Laptop F3Ka chassis
Sound Card:	on-board
PSU:	1:30minutes battery
Software:	"genui xp", 'cause i hated vista

Jul 13, 2006, 09:34 PM	#14
warup89 Join Date: Mar 2006 Location: FL Posts: 1,005 (0.38/day) Thanks: 107 Thanked 103 Times in 82 Posts System Specs	thats really weird, because i used ATItool on a x1800xl (closest cousing to the GTO) and it showied me everything. __________________ HeatWare eBay

Jul 13, 2006, 09:38 PM	#15
infrared Join Date: May 2005 Location: Southampton, UK Posts: 2,878 (0.99/day) Thanks: 233 Thanked 185 Times in 156 Posts System Specs	that is weird, i've never come across an x1k series card that doesn't show temperature in atitool. Yeah, see if rivatuna works. btw, warup, getting my wages this saturday, i'll go streight to the bank on monday and i should have enough for the x850cf thanks for being patient. __________________ I don't suffer from insanity - I enjoy every minute of it!

Jul 13, 2006, 09:41 PM	#16
warup89 Join Date: Mar 2006 Location: FL Posts: 1,005 (0.38/day) Thanks: 107 Thanked 103 Times in 82 Posts System Specs	yeah if rivatuner works, then stick with it . -and alright man, i have the card ready for you __________________ HeatWare eBay

Jul 13, 2006, 09:43 PM	#17
pt not a suicide-bomber Join Date: Mar 2006 Location: Portugal Posts: 5,877 (2.23/day) Thanks: 106 Thanked 219 Times in 193 Posts System Specs	Rivatuner works fine and shows everything but can't change voltages (not that i want) __________________ [img disabled]http://apax.eveonlinekb.com/?a=sig&i=39051&s=zealot[/img]

Jul 14, 2006, 03:06 PM	#19
pt not a suicide-bomber Join Date: Mar 2006 Location: Portugal Posts: 5,877 (2.23/day) Thanks: 106 Thanked 219 Times in 193 Posts System Specs	perhaps in the next version of ATITOOL, meanwhile use Rivatuner __________________ [img disabled]http://apax.eveonlinekb.com/?a=sig&i=39051&s=zealot[/img]

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)