• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Cant get 2133 Ram to go there?

Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
Mushkin 997015 2133 1.5v 2x4Mb
Intel DZ68DC
I can NOT get this ram to boot at 2133 XMP or manual settings.
Supposed to be 1.5v chips but even trying 1.65 they refuse to go
I can run 186x stble but it's a big waste if they wont run at spec and I dont know any more tricks! tried looser timings, stepped volts up thru 1.65 did a hundred combo's trying i'm stumped?
Sadly I cant use the new found Samsung sticks as there is already a known issue with "Low Profile" sticks on Intel Z68 Extreme's:mad:
 
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
This may be a board limitation rather than the sticks. Some board just won't do 2133. However, I have a couple of questions. First, how loose did you go with with primary timings? Did you try CAS 10, just to see? Also, you may want to look at secondary timings. If they are PSC sticks (as I suspect), the key may be there.Also, have you tried bumping up VTT? Many high speed sticks require this.
 
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
I tried step's to 12's and 29 and stepping voltage up to 1.65
There rated 2133 10 11 10 28 at 1.5 volts, and my experiance with Mushkin has been "better" than advertised settings, and these are supposed to be the "creme of the crop" set.

At 1 point when I was just setting up BIOS, I had got 2102 manully but after I did reboot to change other CPU stuff I lost it in the maze of sooo many try's

I'm not sure where my VTT is because of the Intel BIOS wording for rocket scientest lol
Here is shot of the sub timings tht I dont know jack, so mabey you can spot something to change

Thank you greatly !!
--------[ AIDA64 Extreme Edition ]--------------------------------------------------------------------------------------

Version AIDA64 v1.50.1200
Benchmark Module 2.7.333-x64
Homepage http://www.aida64.com/
Report Type Quick Report
Computer FIREBIRD
Generator Kevin
Operating System Microsoft Windows 7 Ultimate 6.1.7600 (Win7 RTM)
Date 2012-01-29
Time 11:00


--------[ SPD ]---------------------------------------------------------------------------------------------------------

[ DIMM2: Mushkin 992015 (997015) ]

Memory Module Properties:
Module Name Mushkin 992015 (997015)
Serial Number None
Module Size 4 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR3 SDRAM
Memory Speed DDR3-1333 (667 MHz)
Module Width 64 bit
Module Voltage 1.5 V
Error Detection Method None

Memory Timings:
@ 609 MHz 8-8-8-22 (CL-RCD-RP-RAS) / 30-98-4-10-5-5 (RC-RFC-RRD-WR-WTR-RTP)
@ 533 MHz 7-7-7-20 (CL-RCD-RP-RAS) / 27-86-4-8-4-4 (RC-RFC-RRD-WR-WTR-RTP)
@ 457 MHz 6-6-6-17 (CL-RCD-RP-RAS) / 23-74-3-7-4-4 (RC-RFC-RRD-WR-WTR-RTP)

Extreme Memory Profile:
Profile Name Enthusiast (Certified)
Memory Speed DDR3-2133 (1066 MHz)
Voltage 1.50 V
@ 1066 MHz 10-11-10-28 (CL-RCD-RP-RAS) / 38-171-0-7-16-8-8 (RC-RFC-CR-RRD-WR-WTR-RTP)
@ 640 MHz 6-7-6-17 (CL-RCD-RP-RAS) / 23-103-0-5-10-5-5 (RC-RFC-CR-RRD-WR-WTR-RTP)

Memory Module Features:
Auto Self Refresh Supported
Extended Temperature Range Supported
Extended Temperature Refresh Rate Not Supported
On-Die Thermal Sensor Readout Supported

[ DIMM4: Mushkin 992015 (997015) ]

Memory Module Properties:
Module Name Mushkin 992015 (997015)
Serial Number None
Module Size 4 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR3 SDRAM
Memory Speed DDR3-1333 (667 MHz)
Module Width 64 bit
Module Voltage 1.5 V
Error Detection Method None

Memory Timings:
@ 609 MHz 8-8-8-22 (CL-RCD-RP-RAS) / 30-98-4-10-5-5 (RC-RFC-RRD-WR-WTR-RTP)
@ 533 MHz 7-7-7-20 (CL-RCD-RP-RAS) / 27-86-4-8-4-4 (RC-RFC-RRD-WR-WTR-RTP)
@ 457 MHz 6-6-6-17 (CL-RCD-RP-RAS) / 23-74-3-7-4-4 (RC-RFC-RRD-WR-WTR-RTP)

Extreme Memory Profile:
Profile Name Enthusiast (Certified)
Memory Speed DDR3-2133 (1066 MHz)
Voltage 1.50 V
@ 1066 MHz 10-11-10-28 (CL-RCD-RP-RAS) / 38-171-0-7-16-8-8 (RC-RFC-CR-RRD-WR-WTR-RTP)
@ 640 MHz 6-7-6-17 (CL-RCD-RP-RAS) / 23-103-0-5-10-5-5 (RC-RFC-CR-RRD-WR-WTR-RTP)

Memory Module Features:
Auto Self Refresh Supported
Extended Temperature Range Supported
Extended Temperature Refresh Rate Not Supported
On-Die Thermal Sensor Readout Supported
 
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
I tried step's to 12's and 29 and stepping voltage up to 1.65
There rated 2133 10 11 10 28 at 1.5 volts, and my experiance with Mushkin has been "better" than advertised settings, and these are supposed to be the "creme of the crop" set.

At 1 point when I was just setting up BIOS, I had got 2102 manully but after I did reboot to change other CPU stuff I lost it in the maze of sooo many try's

I'm not sure where my VTT is because of the Intel BIOS wording for rocket scientest lol
Here is shot of the sub timings tht I dont know jack, so mabey you can spot something to change

Thank you greatly !!
--------[ AIDA64 Extreme Edition ]--------------------------------------------------------------------------------------

Version AIDA64 v1.50.1200
Benchmark Module 2.7.333-x64
Homepage http://www.aida64.com/
Report Type Quick Report
Computer FIREBIRD
Generator Kevin
Operating System Microsoft Windows 7 Ultimate 6.1.7600 (Win7 RTM)
Date 2012-01-29
Time 11:00


--------[ SPD ]---------------------------------------------------------------------------------------------------------

[ DIMM2: Mushkin 992015 (997015) ]

Memory Module Properties:
Module Name Mushkin 992015 (997015)
Serial Number None
Module Size 4 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR3 SDRAM
Memory Speed DDR3-1333 (667 MHz)
Module Width 64 bit
Module Voltage 1.5 V
Error Detection Method None

Memory Timings:
@ 609 MHz 8-8-8-22 (CL-RCD-RP-RAS) / 30-98-4-10-5-5 (RC-RFC-RRD-WR-WTR-RTP)
@ 533 MHz 7-7-7-20 (CL-RCD-RP-RAS) / 27-86-4-8-4-4 (RC-RFC-RRD-WR-WTR-RTP)
@ 457 MHz 6-6-6-17 (CL-RCD-RP-RAS) / 23-74-3-7-4-4 (RC-RFC-RRD-WR-WTR-RTP)

Extreme Memory Profile:
Profile Name Enthusiast (Certified)
Memory Speed DDR3-2133 (1066 MHz)
Voltage 1.50 V
@ 1066 MHz 10-11-10-28 (CL-RCD-RP-RAS) / 38-171-0-7-16-8-8 (RC-RFC-CR-RRD-WR-WTR-RTP)
@ 640 MHz 6-7-6-17 (CL-RCD-RP-RAS) / 23-103-0-5-10-5-5 (RC-RFC-CR-RRD-WR-WTR-RTP)

Memory Module Features:
Auto Self Refresh Supported
Extended Temperature Range Supported
Extended Temperature Refresh Rate Not Supported
On-Die Thermal Sensor Readout Supported

[ DIMM4: Mushkin 992015 (997015) ]

Memory Module Properties:
Module Name Mushkin 992015 (997015)
Serial Number None
Module Size 4 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR3 SDRAM
Memory Speed DDR3-1333 (667 MHz)
Module Width 64 bit
Module Voltage 1.5 V
Error Detection Method None

Memory Timings:
@ 609 MHz 8-8-8-22 (CL-RCD-RP-RAS) / 30-98-4-10-5-5 (RC-RFC-RRD-WR-WTR-RTP)
@ 533 MHz 7-7-7-20 (CL-RCD-RP-RAS) / 27-86-4-8-4-4 (RC-RFC-RRD-WR-WTR-RTP)
@ 457 MHz 6-6-6-17 (CL-RCD-RP-RAS) / 23-74-3-7-4-4 (RC-RFC-RRD-WR-WTR-RTP)

Extreme Memory Profile:
Profile Name Enthusiast (Certified)
Memory Speed DDR3-2133 (1066 MHz)
Voltage 1.50 V
@ 1066 MHz 10-11-10-28 (CL-RCD-RP-RAS) / 38-171-0-7-16-8-8 (RC-RFC-CR-RRD-WR-WTR-RTP)
@ 640 MHz 6-7-6-17 (CL-RCD-RP-RAS) / 23-103-0-5-10-5-5 (RC-RFC-CR-RRD-WR-WTR-RTP)

Memory Module Features:
Auto Self Refresh Supported
Extended Temperature Range Supported
Extended Temperature Refresh Rate Not Supported
On-Die Thermal Sensor Readout Supported

Does it allow you to tweak beyond the primary 4? I do think it's important for you to find out what VTT is for your board. It could make all of the difference. I suggest you google it. ;)
 
Joined
Apr 21, 2010
Messages
5,731 (1.13/day)
Location
West Midlands. UK.
System Name Ryzen Reynolds
Processor Ryzen 1600 - 4.0Ghz 1.415v - SMT disabled
Motherboard mATX Asrock AB350m AM4
Cooling Raijintek Leto Pro
Memory Vulcan T-Force 16GB DDR4 3000 16.18.18 @3200Mhz 14.17.17
Video Card(s) Sapphire Nitro+ 4GB RX 580 - 1450/2000 BIOS mod 8-)
Storage Seagate B'cuda 1TB/Sandisk 128GB SSD
Display(s) Acer ED242QR 75hz Freesync
Case Corsair Carbide Series SPEC-01
Audio Device(s) Onboard
Power Supply Corsair VS 550w
Mouse Zalman ZM-M401R
Keyboard Razor Lycosa
Software Windows 10 x64
Benchmark Scores https://www.3dmark.com/spy/6220813
Support for DDR3 1600+ /1333 /1066 MHz DIMMs

Source

Your board doesn't officially support 2133mhz RAM, it say's 1600+ nothing about 2133mhz
 
Joined
Sep 20, 2011
Messages
527 (0.12/day)
Location
somewhere in Eastern Europe
System Name Cruncher
Processor AMD FX-8370
Motherboard Asus Crosshair V Formula
Cooling Thermalright Silver Arrow SB-E
Memory 2x4 GB Corsair XMS3 2000
Video Card(s) Sapphire HD7870+Powercolor HD7850 CrossFire
Storage Corsair ForceGT 90 SSD,WD Black 500
Display(s) Acer 24'' 2ms
Case Cooler Master HAF 932
Audio Device(s) onboard
Power Supply Thermaltake Grand 1050w 80+Gold
Software Win 7 SP1 Ult x64
@ 1066 MHz 10-11-10-28 (CL-RCD-RP-RAS) / 38-171-0-7-16-8-8 (RC-RFC-CR-RRD-WR-WTR-RTP)

You can try 1000 mhz 9-10-9-28 or 9-10-10-28
it will not be much slower
 
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
You can try 1000 mhz 9-10-9-28 or 9-10-10-28
it will not be much slower

Honestly, on Sandy Bridge systems, anything beyond 1866 has significant diminishing returns. However, from the perspective of the OP, he wants to get what he paid for.
 
Joined
Sep 20, 2011
Messages
527 (0.12/day)
Location
somewhere in Eastern Europe
System Name Cruncher
Processor AMD FX-8370
Motherboard Asus Crosshair V Formula
Cooling Thermalright Silver Arrow SB-E
Memory 2x4 GB Corsair XMS3 2000
Video Card(s) Sapphire HD7870+Powercolor HD7850 CrossFire
Storage Corsair ForceGT 90 SSD,WD Black 500
Display(s) Acer 24'' 2ms
Case Cooler Master HAF 932
Audio Device(s) onboard
Power Supply Thermaltake Grand 1050w 80+Gold
Software Win 7 SP1 Ult x64
Honestly, on Sandy Bridge systems, anything beyond 1866 has significant diminishing returns. However, from the perspective of the OP, he wants to get what he paid for.

This I absolutely agree.

By the way, the 2x4 gb modules sometimes require command rate=2T.
revin, have you tried to set 2T?
 
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
Does it allow you to tweak beyond the primary 4? I do think it's important for you to find out what VTT is for your board. It could make all of the difference. I suggest you google it. ;)
Yes I can change all sub-set timings

You can try 1000 mhz 9-10-9-28 or 9-10-10-28
it will not be much slower
If you ment 500/1000 I'm able to already do 1866 9.9.9.26.1t
I'm Bclk locked so 1066 is lowest I can select then 1333, 1866, or 2133, but when I tried uping Bclk and thus uped ram multi, it is no go even set at 12's



This I absolutely agree.

By the way, the 2x4 gb modules sometimes require command rate=2T.
revin, have you tried to set 2T?
Yes did 2t's

Source

Your board doesn't officially support 2133mhz RAM, it say's 1600+ nothing about 2133mhz

The Intel P67 was certified for 2133, and it would tend to think that the Z68 "should" also but,....... I may be SOL

Thank you again
I think that VTT is "System Agent", I'll keep studying..........
I think my MaxxMEM looks like they have good results
Might be best to go back to my first thoughts of 4x4 1600 and call it good!
But then again, 2133's at 1.5v was hard to pass up :wtf:

Does it allow you to tweak beyond the primary 4? I do think it's important for you to find out what VTT is for your board. It could make all of the difference. I suggest you google it. ;)

I'm all over it
It is hard to decipher over to intel's "crap but i'm learnig!! [i think?!!]
 
Last edited:
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
Well I'm getting closer


1333 77724
 
Last edited:
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Joined
Sep 20, 2011
Messages
527 (0.12/day)
Location
somewhere in Eastern Europe
System Name Cruncher
Processor AMD FX-8370
Motherboard Asus Crosshair V Formula
Cooling Thermalright Silver Arrow SB-E
Memory 2x4 GB Corsair XMS3 2000
Video Card(s) Sapphire HD7870+Powercolor HD7850 CrossFire
Storage Corsair ForceGT 90 SSD,WD Black 500
Display(s) Acer 24'' 2ms
Case Cooler Master HAF 932
Audio Device(s) onboard
Power Supply Thermaltake Grand 1050w 80+Gold
Software Win 7 SP1 Ult x64
Excellent memory bandwidth. Still try to set command rate 2T . My corsair 2x4 does not start more than 1900, if CR not 2T. When I had 2x2 modules, they worked fine in 2000 1T, larger memory need 2T.
 

Tatty_Two

Gone Fishing
Joined
Jan 18, 2006
Messages
25,789 (3.89/day)
Location
Worcestershire, UK
Processor Rocket Lake Core i5 11600K @ 5 Ghz with PL tweaks
Motherboard MSI MAG Z490 TOMAHAWK
Cooling Thermalright Peerless Assassin 120SE + 4 Phanteks 140mm case fans
Memory 32GB (4 x 8GB SR) Patriot Viper Steel 4133Mhz DDR4 @ 3600Mhz CL14@1.45v Gear 1
Video Card(s) Asus Dual RTX 4070 OC
Storage WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s) AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s) Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply Seasonic CORE GM650w Gold Semi modular
Mouse Coolermaster Storm Octane wired
Keyboard Element Gaming Carbon Mk2 Tournament Mech
Software Win 10 Home x64
I had almost identical issues albeit on a different platform, I tried damn near everything over a period of weeks, in the end I set everything to auto in relation to the memory and they booted first time. then much to my dismay, I found Iwas getting better benches at 1600mhz at 6-6-6-18 than I was at 2000mhz @ 9-9-9-26, but as I said, that was on a S1366.
 
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
Even better now up to 103 Blck
Some reason I got a report in older XTU that mem temp "over" at 128c
yet I'm only using 1.55v
.......................It had to hve been a fluck
 
Last edited:
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
NOTE
I may have hit that magicial "24Gb/s" wall
Can you spot the issue?
:toast:

Thank you Pauli, Taty, and Dave :rockout::respect:
I'll keep trying with these, I'm not sure it's worth a "gamble" to try the Samsung sticks since Intel has "Reporting" a known issue with "small/short" sticks, BUT I really wanted to do 16Gb
for the video Editing, and a ramdisk, but...........IDK,
 
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
That run looks pretty good. Can't see you scoring much better than that with 2133 and tighter timings. I'd stability test those speeds and timings, and if they are stable, I'd be quite happy.
I seen when going thru the MaxxMem spread sheet, these do indeed seem to be pretty strong, albeit it's just another benchie, it's a base to compare to

Excellent memory bandwidth. Still try to set command rate 2T . My corsair 2x4 does not start more than 1900, if CR not 2T. When I had 2x2 modules, they worked fine in 2000 1T, larger memory need 2T.
I have tried moving all the primary rates up and 2T also, but it just wont boot with 2133 divider enabled. 1866 stock volts boots Auto timings as seen in the screenies, so thats gotta be kinda good eh?

I had almost identical issues albeit on a different platform, I tried damn near everything over a period of weeks, in the end I set everything to auto in relation to the memory and they booted first time. then much to my dismay, I found Iwas getting better benches at 1600mhz at 6-6-6-18 than I was at 2000mhz @ 9-9-9-26, but as I said, that was on a S1366.

Thats another item I noticed in MaxxMem, that range of scores appear to be less than where Im at with 999 1T, but still I did get a CPU boost to 4.75 :toast:
Dave has mentioned to me the this Mem Controller is the best to date for effieancy
 
Joined
Mar 10, 2010
Messages
11,878 (2.32/day)
Location
Manchester uk
System Name RyzenGtEvo/ Asus strix scar II
Processor Amd R5 5900X/ Intel 8750H
Motherboard Crosshair hero8 impact/Asus
Cooling 360EK extreme rad+ 360$EK slim all push, cpu ek suprim Gpu full cover all EK
Memory Corsair Vengeance Rgb pro 3600cas14 16Gb in four sticks./16Gb/16GB
Video Card(s) Powercolour RX7900XT Reference/Rtx 2060
Storage Silicon power 2TB nvme/8Tb external/1Tb samsung Evo nvme 2Tb sata ssd/1Tb nvme
Display(s) Samsung UAE28"850R 4k freesync.dell shiter
Case Lianli 011 dynamic/strix scar2
Audio Device(s) Xfi creative 7.1 on board ,Yamaha dts av setup, corsair void pro headset
Power Supply corsair 1200Hxi/Asus stock
Mouse Roccat Kova/ Logitech G wireless
Keyboard Roccat Aimo 120
VR HMD Oculus rift
Software Win 10 Pro
Benchmark Scores 8726 vega 3dmark timespy/ laptop Timespy 6506
Mushkin 997015 2133 1.5v 2x4Mb
Intel DZ68DC
I can NOT get this ram to boot at 2133 XMP or manual settings.
Supposed to be 1.5v chips but even trying 1.65 they refuse to go
I can run 186x stble but it's a big waste if they wont run at spec and I dont know any more tricks! tried looser timings, stepped volts up thru 1.65 did a hundred combo's trying i'm stumped?
Sadly I cant use the new found Samsung sticks as there is already a known issue with "Low Profile" sticks on Intel Z68 Extreme's

Ive had the same issue with the same sticks on a 990fx crosshair V ,sys <ive not got mine past 1889 yet but its early days,im going to put some water jackets on them maybe see what theyll do, whats the highest you would go with volts on these with good cooling on them ?:confused:1.5 dosnt sound a lot :roll:
 
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
Ive had the same issue with the same sticks on a 990fx crosshair V ,sys <ive not got mine past 1889 yet but its early days,im going to put some water jackets on them maybe see what theyll do, whats the highest you would go with volts on these with good cooling on them ?:confused:1.5 dosnt sound a lot :roll:

Not really a clue, but I stopped at 1.65v
 
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
OK Pauli, I stumbled on to something
I see here where Dave shows a Dimm Vtt listed
I have that option listed in my BIOS twice also, named System Agent
It's in Voltage Overides AND under my Memeory Settings under my Dimm Voltage
Can this be helpful with the "Sub Timings" you asked to see?

I have tried it from 0.750 up to 1.250 with 2133

 
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
OK Pauli, I stumbled on to something
I see here where Dave shows a Dimm Vtt listed
I have that option listed in my BIOS twice also, named System Agent
It's in Voltage Overides AND under my Memeory Settings under my Dimm Voltage
Can this be helpful with the "Sub Timings" you asked to see?

I have tried it from 0.750 up to 1.250 with 2133

http://img.techpowerup.org/120201/Capture017902.jpg

I've never had to run 1.25v+ VTT for 2133 on just 2 sticks. So, I'm thinking it's probably not that. I think if you want to confirm it though, you could try up to 1.35v, but that's not something I feel comfortable with for 24/7 clocks. Some may disagree. I still think it's more about secondary timing. If you could post a bios shot of your secondary timings, Dave, myself and some others may be able to help more. If secondary timing adjustments don't help, I have to think it's just your board. I've never had a set of Mushkins not run rated speeds.
 
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
FWIW I got nother BSOD x050 overnite running Intel XTU stressing Ram at current settings :(
 
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
FWIW I got nother BSOD x050 overnite running Intel XTU stressing Ram at current settings :(

Try 1866 9-10-9-24 1T 1.53v and 1.2 VTT. I think that will stabilize the ram. At 1866, I don't think you should be having issues with secondary timings. But before that, let's make sure your cpu is stable. I really like to isolate problems and rule things out 1 by 1. So, back that ram up to 1600 with fairly loose timings, then try running 20 cycles of Intel Burn In on at least high. If you pass that, we can take the cpu out of the equation. If that passes, then go with the settings I listed above and then test for a couple of hours with memtest.
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
Over 1.2v VTT/VCCIO can be dangerous.

Also, mmore VTT/VCCIO than is needed can cause stability issues, too.

I was going to mention that your write performance on the 1866 MHz divider is very high, and that may be the cause of 2133 MHz divider not working. I have found that the board that do boot 2x4 GB or even 4x4GB, generally have a lower write bandwidth. I'm not 100% sure why 4GB DIMMs cause this increase in write bandwidth, but I do know that if you check bandwdith of those running 2133 MHz on 2x2GB DIMMs, the bandwidth is generally a fair bit lower than 4GB DIMMs.


XTU can be a damn useful tool, BTW...nice to see you are using it...but older versions may not be giving true readings, so do be careful.
 
Joined
Oct 18, 2007
Messages
1,288 (0.21/day)
System Name Firebird
Processor Intel i7 2600K @5.0'ish 24/7 stock core Voltage {5.2 w/102 bCLK}
Motherboard Intel Extreme DZ68BC SkullTrail Z68 Cougerpoint, Excellent MCH !
Cooling Scythe NINJA PLUS Rev.B[skt478] Modded to 1155 Scythe SH12 fan
Memory Samsung 32nm 16Gb 4x4 (@19xxmhz} low profile[ better than 2133 banwidth]
Video Card(s) Gigabyte Aurosus 1080Ti
Storage Intel 512 SSD,Samsung 9701Tb, Toshiba 3Tbx2,Hitachi 320,1TBx2,'Cuda 400 7200.10, WD1TBUSB,to SATA
Display(s) Acer K272HUL 1440 27" WQHD, Samsung 226W, Vizio M60C3 4K 60",Vizio XVT3D554SV
Case CoolerMaster HAF 932
Audio Device(s) Intel 10ch[9+1] HD Audio X540> Pioneer VSX39TX[copper chasis,Rosewood sides 5x6LCD remote
Power Supply Seasonic X750 @ 24/7
Mouse Logictech G300s
Keyboard Saitek Cyborg v7
Software Windows 7 ROG E3 X64 by Neuropass/tweakscene
Benchmark Scores 4642@665/1600 220/GAT F1 4544 220/667strap 2.5/3/2/6 Bliss 650/1500 6490 Q6700 Bliss 690/1500
Here's Phase 1 IBT

100Bclk
4.5Ghz 1.400 v[79-81c {27-32 idle] w Modded Ninja +Rev B] still need to tweak it, semi fanless]
1600 mem
 
Top