- Joined
- Oct 11, 2008
- Messages
- 82 (0.01/day)
- Location
- La Habra,CA
System Name | V |
---|---|
Processor | Intel i7 3770K |
Motherboard | Gigabyte Z77X-UD5H |
Cooling | CM Hyper 212 Plus w/ 2 Antec Red LED 120mm Tricool fans |
Memory | 16GB (2x8GB) G.Skill Ares 1866mhz |
Video Card(s) | EVGA GTX 480 |
Storage | Monster Daytona 90GB SSD (OS) WD Caviar Black 1TB (storage) |
Display(s) | Panasonic 42" and Hanns-G 28" |
Case | CM HAF 922XM |
Audio Device(s) | SB X-Fi Xtreme Fatality Edition |
Power Supply | Ultra X-3 1KW |
Software | Windows 7 Ultimate 64 Bit |
I searched through the forums and didn't really find an answer to my question. So unfortunate for you folks here at TPU, because that means I get to bother all you fine people!
I'm in the process of putting on an AM vga cooler on my GTX 480 as it runs a little to warm for my taste. The cooler I'm looking into says that I would want to replace my thermal pads/tape. I'm not really sure what thickness or type I should go with though.
I was told these were the best to use:
http://www.frozencpu.com/products/1...ermal_Conductivity_60_WmK.html?tl=g8c487s1290
I'm in the process of putting on an AM vga cooler on my GTX 480 as it runs a little to warm for my taste. The cooler I'm looking into says that I would want to replace my thermal pads/tape. I'm not really sure what thickness or type I should go with though.
I was told these were the best to use:
http://www.frozencpu.com/products/1...ermal_Conductivity_60_WmK.html?tl=g8c487s1290