2560x1440 IPS 27" LED Monitor on the Cheap! - Page 8

ctrain24 · Mar 22, 2012, 08:48 PM

Quote:

Originally Posted by erocker

Got my Ergotron MX mount in today and installed it:

For some of you using VESA mounts, have some washers handy as there is very little clearance between the VESA screw holes and the metal shield of the internals.

Damn that's nice erocker!

Ordered my Catleap from dcsamsungmall on Sunday 3/18 and received it Tuesday 3/20. From South Korea to NYC in two days

Only negatives are one dead pixel on the left side of the screen and of course the stand. I decided to replace it with a 3M MS110MB monitor stand that I got on craigslist. Sorry, cell phone pics taken in basement:

Some internal pics:

Anath · Mar 22, 2012, 08:58 PM

Quote:

Originally Posted by ctrain24

Damn that's nice erocker!

Ordered my Catleap from dcsamsungmall on Sunday 3/18 and received it Tuesday 3/20. From South Korea to NYC in two days

How is that stand? I was thinking about purchasing a similar one.

ctrain24 · Mar 22, 2012, 09:13 PM

Quote:

Originally Posted by Anath

How is that stand? I was thinking about purchasing a similar one.

You have to use a screwdriver to adjust movement which can be annoying if you adjust your monitor often. I don't so it's not a big deal for me. The stand is good quality and I got it for $25. I'm very happy with it.

erocker · Mar 22, 2012, 09:19 PM

Quote:

Originally Posted by ctrain24

You have to use a screwdriver to adjust movement which can be annoying if you adjust your monitor often. I don't so it's not a big deal for me. The stand is good quality and I got it for $25. I'm very happy with it.

No you don't. You only have to adust the tension on the part where the monitor meets the mount for the weight of your monitor. Everything else moves freely and quite precisely.

ctrain24 · Mar 22, 2012, 09:23 PM

Quote:

Originally Posted by erocker

No you don't. You only have to adust the tension on the part where the monitor meets the mount for the weight of your monitor. Everything else moves freely and quite precisely.

Yeah you're right. I should of said tension not movement.

erocker · Mar 22, 2012, 09:25 PM

Forgot to mention you only need to adjust the tension once and that's it. I do kinda wish I would of went your route with the 3M stand... For portability and all that. But a cool robot arm holding my monitor up is nice too I guess.

HTC · Mar 22, 2012, 10:29 PM

Just bought mine: here's hoping i don't get screwed by customs!

TeXBill · Mar 23, 2012, 01:05 AM

Got mine running, pic is great looking with no dead pixels.

Damm nice monitor for the price.

Stock stand is a little wobbly (side to side). My computer desk is an old metal desk once you get monitor in place it doesn't rock (move). Maybe getting a different stand (mount) for it.

BumbleBee · Mar 23, 2012, 09:13 AM

Cylon arm wins.

Yo_Wattup · Mar 23, 2012, 10:12 AM

Quote:

Originally Posted by erocker

How are you liking it?

Btw, the single, dual-dvi models (serial # 2c) are not able to overclock the hz much. Mine can do 65hz fine. There is someone on OCN who is trying to get an order of different logic boards for these. If cheap enough, they'll be a good buy.

Whoa whoa whoa whoa... backup a sec... you can overclock monitors.. ahem.. how? And why have I not heard of this?

I hate 60hz

Delta6326 · Mar 23, 2012, 03:23 PM

Quote:

Originally Posted by Yo_Wattup

Whoa whoa whoa whoa... backup a sec... you can overclock monitors.. ahem.. how? And why have I not heard of this?

I hate 60hz

Here if you have AMD

EDIT: whoops nevermind I don't think this does Hz

Hey I was wondering if This says make of 75Hz does that mean it know how high it already can go?

Shurakai · Mar 23, 2012, 06:50 PM

Good luck to everyone trying these out, they do look nice. Won't get one myself, but hopefully with so many people diving on these we'll see other companies try compete with these prices (perhaps releasing nice simple models like the catleap)

erocker · Mar 23, 2012, 06:56 PM

Quote:

Originally Posted by Yo_Wattup

Whoa whoa whoa whoa... backup a sec... you can overclock monitors.. ahem.. how? And why have I not heard of this?

I hate 60hz

Some of the earlier revisions can overclock to around 100hz. Mine can only do 65hz at 2560x1440. Believe me 60hz on one of these panels doesn't even compare to 60hz on your run of the mill tft panel.

Quote:

Originally Posted by Delta6326

Here if you have AMD

EDIT: whoops nevermind I don't think this does Hz
http://img.techpowerup.org/120323/Capture019602.jpg

Hey I was wondering if This says make of 75Hz does that mean it know how high it already can go?

http://img.techpowerup.org/120323/Capture020.jpg

It can do 75hz, but most likely at a lower resolution.

HTC · Mar 23, 2012, 07:01 PM

Quote:

Originally Posted by Shurakai

Good luck to everyone trying these out, they do look nice. Won't get one myself, but hopefully with so many people diving on these we'll see other companies try compete with these prices (perhaps releasing nice simple models like the catleap)

If nobody is importing these for sale in our countries, maybe someone should start a business by importing these brands for sale to the general public: if sold by ... say ... $500 while maintaining warranty and the whole nine yards, wouldn't they still make a killing?

Made a mistake and ordered mine by economic shipping, instead of EMS: won't be here before the 30th @ the earliest.

BumbleBee · Mar 23, 2012, 07:05 PM

I think the company that makes these would have a problem with that lol

Wrigleyvillain · Mar 23, 2012, 08:27 PM

I don't know; why would they not want expanded distribution of their products? These eBay sellers wouldn't like it but who cares? I am under the impression they are not factory-direct on eBay..

NdMk2o1o · Mar 23, 2012, 09:18 PM

Quote:

Originally Posted by HTC

If nobody is importing these for sale in our countries, maybe someone should start a business by importing these brands for sale to the general public: if sold by ... say ... $500 while maintaining warranty and the whole nine yards, wouldn't they still make a killing?

Made a mistake and ordered mine by economic shipping, instead of EMS: won't be here before the 30th @ the earliest.

Ordering a single unit is different than importing 50 units, bet your ass that customs will be on to you if you try that and then your profit is gone

HTC · Mar 23, 2012, 09:29 PM

Quote:

Originally Posted by NdMk2o1o

Ordering a single unit is different than importing 50 units, bet your ass that customs will be on to you if you try that and then your profit is gone

If you're a distributor, would they still hit you as hard? Possibly, dunno!

NdMk2o1o · Mar 23, 2012, 09:30 PM

Quote:

Originally Posted by HTC

If you're a distributor, would they still hit you as hard? Possibly, dunno!

Yes, you still pay the applicable tax for your country which at $150 for each unit you make little or nothing for the effort, I would hazard a guess anyway, can't say for sure.

Black Haru · Mar 23, 2012, 09:39 PM

Quote:

Originally Posted by NdMk2o1o

Yes, you still pay the applicable tax for your country which at $150 for each unit you make little or nothing for the effort, I would hazard a guess anyway, can't say for sure.

you would have to import a large number. once you start numbering in the thousands and tens of thousands, your profit margin will go up. good luck financing that though.

HTC · Mar 23, 2012, 09:43 PM

Quote:

Originally Posted by NdMk2o1o

Yes, you still pay the applicable tax for your country which at $150 for each unit you make little or nothing for the effort, I would hazard a guess anyway, can't say for sure.

Checked CPUs (3930K) for an example (attachments): it "gains" under 108€ per unit, @ these e-stores.

If you bought the monitors @ the store's price (being a distributor, you could get it @ an even lower price) and selling it @ $500 each, even with $150 tax, you would still be making a profit, no?

EDIT

Less, actually: would be selling them to the stores and they buy it @ lower prices, obviously.

Phusius · Mar 23, 2012, 10:37 PM

Hello, I just bought this monitor yesterday. Can someone tell me how to overclock it? I am running an i7-2700k and Sapphire 7970 with 16 GB of ram and 1 TB hard drive on the non Gen3 version of Asus Z68 deluxe if it matters.

Just trying to figure out what all I need to do to OC this to 65 hz or whatever is best. Any tips welcome.

Yo_Wattup · Mar 24, 2012, 12:05 AM

Quote:

Originally Posted by Delta6326

Here if you have AMD

EDIT: whoops nevermind I don't think this does Hz
http://img.techpowerup.org/120323/Capture019602.jpg

Hey I was wondering if This says make of 75Hz does that mean it know how high it already can go?

http://img.techpowerup.org/120323/Capture020.jpg

I have the hz adjust slider but not the calibration thingy. How should I test for 'stability'?

Quote:

Originally Posted by erocker

Believe me 60hz on one of these panels doesn't even compare to 60hz on your run of the mill tft panel.

60hz is still 60hz man, I can see individual frames; it's just not fast enough.

So how did you end up overclocking yours?

erocker · Mar 24, 2012, 12:09 AM

Quote:

Originally Posted by Phusius

Hello, I just bought this monitor yesterday. Can someone tell me how to overclock it? I am running an i7-2700k and Sapphire 7970 with 16 GB of ram and 1 TB hard drive on the non Gen3 version of Asus Z68 deluxe if it matters.

Just trying to figure out what all I need to do to OC this to 65 hz or whatever is best. Any tips welcome.

What is the serial number of the monitor? If it's a B version you can OC, if it's a C version (which is most likely), no OC.

Quote:

Originally Posted by Yo_Wattup

I have the hz adjust slider but not the calibration thingy. How should I test for 'stability'?

60hz is still 60hz man, I can see individual frames; it's just not fast enough.

So how did you end up overclocking yours?

Using some utility that's in the monitor thread at OCN. I'm running it at 60hz anyways. Yeah, i can tell what's 60hz and what isn't either. This panel would make your 32" LCD TV look like crap and you wouldn't care about what HZ it's running at. If I were viewing my Samsung monitor at 60hz and this monitor at 60hz, I wouldn't believe that this monitor is actually running at 60hz. Besides are you sure you can tell? You don't seem to have a 120hz monitor.

Wrigleyvillain · Mar 24, 2012, 01:49 AM

Quote:

Originally Posted by Phusius

Just trying to figure out what all I need to do to OC this to 65 hz or whatever is best. Any tips welcome.

Much info and a utility is in the thread about these displays over at overclock.net (which is linked in this one not too far in) as erocker just said again...

System Name:	Corporate Commando
Processor:	Intel i7 3820 @ 4.5ghz
Motherboard:	Asrock x79 extreme 6gb
Cooling:	corsair h100
Memory:	8 gig corsair 1866 ddr3 ram
Video Card:	3 x EVGA GTX 680
Hard Disk:	2x samsung F3 1tb drives in RAID 0, 512gb samsung ssd
Optical Drive:	none
CRT/LCD Model:	3 x Asus 27" monitor @ 5760 x 1080
Case:	Corsair C70
PSU:	Coolermaster 1200watt gold

Processor:	Intel i7 3770K @ 4.6ghz 1.256v
Motherboard:	Asus Maximus V Formula
Cooling:	Water
Memory:	2x4gb Patriot Viper 2133mhz 10-11-10-25 2T 1.55v
Video Card:	Sapphire HD 7970 1125/1575 1.14v
Hard Disk:	Crucial M4 128Gb / Corsair Force 3 120Gb / Samsung 240Gb / 2Tb Seagate
Optical Drive:	None
CRT/LCD Model:	Acheiva Shimian 27" IPS 2560x1440
Case:	Corsair 500R White
Sound Card:	Onboard
PSU:	NZXT Hale90 1Kw
Software:	Windows 8 x64

Processor:	Intel i7 3770K @ 4.6ghz 1.256v
Motherboard:	Asus Maximus V Formula
Cooling:	Water
Memory:	2x4gb Patriot Viper 2133mhz 10-11-10-25 2T 1.55v
Video Card:	Sapphire HD 7970 1125/1575 1.14v
Hard Disk:	Crucial M4 128Gb / Corsair Force 3 120Gb / Samsung 240Gb / 2Tb Seagate
Optical Drive:	None
CRT/LCD Model:	Acheiva Shimian 27" IPS 2560x1440
Case:	Corsair 500R White
Sound Card:	Onboard
PSU:	NZXT Hale90 1Kw
Software:	Windows 8 x64

Mar 22, 2012, 10:29 PM	#182
HTC Join Date: Apr 2008 Location: Portugal Posts: 1,925 (1.01/day) Thanks: 461 Thanked 282 Times in 230 Posts System Specs	Just bought mine: here's hoping i don't get screwed by customs! __________________ HTC - Hoje Tive Cá I'm PORTUGUESE: apologies for any spelling mistakes!

System Name:	HTC's System
Processor:	APU A3850 undervolted (all PStates)
Motherboard:	Gigabyte A75-UD4H
Cooling:	Lapped Noctua NH-C12P
Memory:	Gskill Ripjaws Z DDR3-1600MHz 4x4GB -- F3-12800CL9Q-16GBZL
Video Card:	Onboard
Hard Disk:	4 * Samsung 1 TB HD103UJ in RAID 0 and RAID 10 + 2 * Samsung 1 TB HD103UJ
Optical Drive:	2 * DVD+/-RW Samsung 20X Supermulti SATA Black
CRT/LCD Model:	Catleap Q270 LED
Case:	Corsair Obsidian 650D
Sound Card:	Sound Blaster X-Fi Xtreme Gamer
PSU:	Corsair TX750
Software:	Windows 7 x64 SP1

Mar 22, 2012, 09:25 PM	#181
erocker Senior Moderator Join Date: Jul 2006 Location: Milwaukee, WI. Posts: 32,292 (12.78/day) Thanks: 2,817 Thanked 12,452 Times in 7,918 Posts System Specs	Forgot to mention you only need to adjust the tension once and that's it. I do kinda wish I would of went your route with the 3M stand... For portability and all that. But a cool robot arm holding my monitor up is nice too I guess.

Mar 23, 2012, 01:05 AM	#183
TeXBill Join Date: Oct 2009 Location: TX Posts: 1,348 (1.01/day) Thanks: 1,431 Thanked 643 Times in 431 Posts System Specs	Got mine running, pic is great looking with no dead pixels. Damm nice monitor for the price. Stock stand is a little wobbly (side to side). My computer desk is an old metal desk once you get monitor in place it doesn't rock (move). Maybe getting a different stand (mount) for it. __________________ heatware:[http://www.heatware.com/eval.php?id=69231]

System Name:	Beast, little beast
Processor:	Core i7 2600K 4.5GHZ 24/7, Core i7 Xeon6 core 3.6GHZ 24/7
Motherboard:	Gigabyte Z68X-UD4-B3 1155Sckt, EVGA X58 sckt 1366
Cooling:	H80, H100
Memory:	24 gigs DDR3 1600Mhz Gskill RipJaws,12 gigs DDR3 1600Mhz Gskill Ripjaws
Video Card:	1 Nvidia 670 eVGA FTW, 1 Nvidia 580 eVGA
Hard Disk:	1- WD Black 640GB, 1X Samsung 1.5TB, 2 X 160 WD Veloc Raptors Raided
Optical Drive:	2 X Asus DVD/RW, LG DVDRW
CRT/LCD Model:	Hanns-G 28" 1920X1200, Acer 24" 1920X1200
Case:	rig#1 Dismatech test bench, rig#2 Made By Bill Tech Bench
Sound Card:	onboard
PSU:	Antec 1000 Watt, PC power&cooling 850 watt
Software:	both Rig's, Win7 64Bit
Benchmarks:	rig #1 4.8GHZ @ 1.375 Volts. running 4.5GHZ 1.272 Volts 24/7. Rig #2 4.6GHZ @ 1.3 Volts 24/7.

Mar 23, 2012, 09:13 AM	#184
BumbleBee Banned Join Date: Mar 2009 Location: Cybertron aka Canada Posts: 4,083 (2.61/day) Thanks: 827 Thanked 1,202 Times in 920 Posts System Specs	Cylon arm wins.

Processor:	Intel Core i5-3570K
Motherboard:	Asus P8Z77-V Pro
Cooling:	Noctua NH-D14
Memory:	8GB Mushkin Blackline DDR3-1600
Video Card:	Gigabyte GTX 670
Hard Disk:	Intel 520 60GB, Seagate Barracuda XT 2TB
Optical Drive:	Asus DRW-24B1ST
CRT/LCD Model:	BenQ 24" XL2420T, Sony 24" GDM-FW900
Case:	Corsair 550D
Sound Card:	Mytek Stereo 192 DSD, Cambridge Azur 550A, Graham Slee Novo, Burson HA-160
PSU:	Corsair AX650
Software:	Windows 7 64-bit Home Premium

System Name:	Desktop/Gamer/Digital Audio Wokstation \|\|\| HTPC
Processor:	2500k @ 4.65ghz \|\|\| AMD A8 @ 3.6ghz
Motherboard:	ASUS P8Z68-V Pro
Cooling:	Noctua NH-D14 with single Blue Antec Tri-Cool 120mm \|\|\| Stock
Memory:	16GB G.Skill Ripjaws X 1600 @1900mhz 8-9-9-24 \|\|\| 8GB G.Skill 1600 CL9
Video Card:	2x HIS HD6950 2GB Crossfire, 6970 clocks \|\|\| HD6550D
Hard Disk:	120GB Intel 320 series SSD + 2TB storage \|\|\| 1TB Seagate
Optical Drive:	same as everyone else, some generic one. \|\|\| <---
CRT/LCD Model:	32" Sony Bravia LCD 1080p \|\|\| 50" Hitachi Plasma 1080p
Case:	Raidmax Raptor modded to 7 fans \|\|\| A compact HP Case
Sound Card:	Firewire audio interface + two 9" studio monitors, 450 REAL watts \|\|\| onboard
PSU:	Corsair TX 750W \|\|\| generic 400W
Software:	Win 7 Ultimate + Win 8 consumer preview\|\|\| Win 7 Pro
Benchmarks:	Never drops below 60fps Battlefield 3 everything on max, fov 90. :D

System Name:	THE CUBE
Processor:	Intel Core 2 Quad Q6600 Kentsfield V1.28
Motherboard:	ASUS P5Q Pro Bios 2102
Cooling:	XIGMATEK S1283 w/crossbow(120mm x4 Left, Back, Back, HSF)
Memory:	Mushkin Blackline 4GB (2 x 2GB) 800Mhz @ 1Ghz 5-5-5-15
Video Card:	2x SAPPHIRE Radeon HD 4850 1GB.
Hard Disk:	WD Black 500GB/WD EXT 2TB/ Toshiba 250GB Test Drive
Optical Drive:	SAMSUNG 22X DVD Burner
CRT/LCD Model:	ASUS VH226H 1080p Black 21.5" 2ms LCD
Case:	"THE CUBE" Custom built pure Red Alder wood
Sound Card:	Onboard/ Logitech Z-2300 200 watts 2.1
PSU:	XION AXP Lan-Party AMP Edition 146A 800W
Software:	Windows 8 Pro x64

Mar 23, 2012, 06:50 PM	#187
Shurakai Join Date: Oct 2007 Location: Australia, SA Posts: 232 (0.11/day) Thanks: 61 Thanked 19 Times in 14 Posts System Specs	Good luck to everyone trying these out, they do look nice. Won't get one myself, but hopefully with so many people diving on these we'll see other companies try compete with these prices (perhaps releasing nice simple models like the catleap)

System Name:	Computer MkVIII
Processor:	2500K @ 4.5ghz
Motherboard:	ASUS Sabertooth P67
Cooling:	CPU: 212+ EVO GPU: Stock
Memory:	8gb G.Skill Ares @2133mhz
Video Card:	EVGA GTX 680 SC
Hard Disk:	2x Crucial M4 128gb SSD 1x Samsung S2 1TB
Optical Drive:	1x Samsung BR R/DVD RW
CRT/LCD Model:	24" Asus VE248 + 17" LG L1750SQ
Case:	Corsair Carbide 300R
Sound Card:	Onboard
PSU:	Corsair HX-650
Software:	Windows 7 Home Premium 64bit

Mar 23, 2012, 07:05 PM	#190
BumbleBee Banned Join Date: Mar 2009 Location: Cybertron aka Canada Posts: 4,083 (2.61/day) Thanks: 827 Thanked 1,202 Times in 920 Posts System Specs	I think the company that makes these would have a problem with that lol

Mar 23, 2012, 08:27 PM	#191
Wrigleyvillain Join Date: Oct 2007 Location: Chicago Posts: 4,556 (2.19/day) Thanks: 1,540 Thanked 1,596 Times in 1,137 Posts System Specs	I don't know; why would they not want expanded distribution of their products? These eBay sellers wouldn't like it but who cares? I am under the impression they are not factory-direct on eBay.. __________________ “i dont care what consoles have they dont have mouse and keyboard” -crazyeyesreaper

System Name:	DarkStar
Processor:	i5 3570K
Motherboard:	Asrock Z77E-ITX
Cooling:	Apogee HD White/AC Nexxos 120/XSPC H2O 750
Memory:	8GB Samsung Green 1600
Video Card:	MSI HD 7950 TF3
Hard Disk:	OCZ Agility 3 240GB
Optical Drive:	Asus Blu Ray burner
CRT/LCD Model:	23" Apple Cinema Display HD Aluminum
Case:	Bit Fenix Prodigy (Yang)
PSU:	NZXT Hale82 650W
Software:	Windows 7 x64

System Name:	Partially there...
Processor:	i5 3570k 4.3Ghz
Motherboard:	Gigabyte GA-Z77-DS3H
Cooling:	Noctua - NH-U12P SE2
Memory:	Gskill RipJaws 8Gb 2400mhz 2x4GB
Video Card:	XFX HD 7950
Hard Disk:	Hitatchi 500GB HDD
Optical Drive:	N/A
CRT/LCD Model:	Shimian 27" 2560x1440
Case:	OEM black
Sound Card:	Onboard
PSU:	Antec VP550w
Software:	Win 7 x64 Home Premium

System Name:	Ideapad Y500
Processor:	i7 3630Qm
Memory:	8gb 1600mhz
Video Card:	gt650m SLI
Hard Disk:	Samsung 840 250gb ssd
Software:	Windows 7 (64 bit)

Mar 23, 2012, 10:37 PM	#197
Phusius Banned Join Date: Mar 2012 Posts: 1,262 (2.79/day) Thanks: 621 Thanked 380 Times in 208 Posts System Specs	Hello, I just bought this monitor yesterday. Can someone tell me how to overclock it? I am running an i7-2700k and Sapphire 7970 with 16 GB of ram and 1 TB hard drive on the non Gen3 version of Asus Z68 deluxe if it matters. Just trying to figure out what all I need to do to OC this to 65 hz or whatever is best. Any tips welcome.

Processor:	i5-2500k @ 4.5
Motherboard:	Asus Z68 Deluxe
Cooling:	Noctua NH-D14
Memory:	16GB DDR3 1600
Video Card:	Sapphire 7950 @ 1200/1475 @ 1175v
CRT/LCD Model:	Dell 23" 2ms
Case:	Carbide 500r
Sound Card:	Asus Xonar DG

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ViewSonic Launches the VX2336s-LED IPS Monitor	Cristian_25H	News	8	Feb 3, 2012 09:17 PM
[HELP!] Is there any different between a LED monitor and a LED Tv?	Com Hunter	General Hardware	8	Sep 7, 2011 06:07 AM
Any non-IPS 2560x1440 monitors?	runevirage	General Hardware	4	Sep 13, 2010 07:59 PM
LG Intros Four Flatron LED-Backlit IPS Monitors at IFA, Berlin	btarunr	News	19	Sep 11, 2010 05:16 AM