Grrrrrrr!!!!!!! (Screw broke off CPU water block)

stinger608 · May 5, 2012, 10:42 PM

Jesus, right in the middle of FINALLY assembling my 2500K system to start crunching and a fucking screw frigging broke off on the CPU waterblock mounting plate!!!

I have a sneaking suspicion that the damn thing was fucked up from the get go!

Got a Swiftech GTZ awhile back and noticed that two of the mounting screws had, in the past, been installed with a screw driver rather than the outer thumb screw usage. A couple of them went in kind of tough but were going in okay. Was adjusting from side to side when one of them just let go! Was using my fingers to tighten them. That is what makes me believe there was a crack in that screw to start with.

None the frigging less, this fucking build is, once again, put on the damn back burner until I can pick up the back plate and screws! Naturally the mounting screw broke off flush with the back plate.

God Damn It, I am about to sell this shit off guys!!!! Every damn time I go to put this system together, some other fucking crap happens!

On a good note, I did get the pump and res mounted and plumbed.

bogmali · May 5, 2012, 11:09 PM

You feel better now

?

stinger608 · May 5, 2012, 11:36 PM

Quote:

Originally Posted by bogmali

You feel better now

?

Not really, but damn Bog, that was funny as hell and did make me frigging laugh out loud!!

Thanks bro!

Of course now I am pretty much needing a damn water block or plate and screws for this shit.

KieX · May 6, 2012, 12:12 AM

You forgot the [rant][/rant] tags stinger. Being SB, there's still BSOD 124's to play with once it's up and running

Anyway, good luck with that build/re-sale

ThE_MaD_ShOt · May 6, 2012, 12:26 AM

Hey stinger if you want to send the block to me I can see what I can do with extracting the broken screw and repairing the threads. We also do machine work at my job.

mjkmike · May 6, 2012, 12:31 AM

Try super glue on a screw driver you don't need. Just rember to let it set.

stinger608 · May 6, 2012, 12:36 AM

Quote:

Originally Posted by ThE_MaD_ShOt

Hey stinger if you want to send the block to me I can see what I can do with extracting the broken screw and repairing the threads. We also do machine work at my job.

yea I am going to take it to work Monday. Just damn it! Wanted to get this puppy running today. I am a machinist by trade, so I can get that damn thing out.......But, the screw broke off at the seat. Still need to either machine a screw or buy one.

Oh yea......And damn!!!!!!!! I am currently frigging ROCKING OUT on some Led Zeppelin "Moby Dick!!!!!!!!!!!!!!!" Go John Bonham!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

mjkmike · May 6, 2012, 12:54 AM

^^ just got some new cans and should find one of the drives with that track on it.

ThE_MaD_ShOt · May 6, 2012, 01:02 AM

Quote:

Originally Posted by stinger608

yea I am going to take it to work Monday. Just damn it! Wanted to get this puppy running today. I am a machinist by trade, so I can get that damn thing out.......But, the screw broke off at the seat. Still need to either machine a screw or buy one.

Oh yea......And damn!!!!!!!! I am currently frigging ROCKING OUT on some Led Zeppelin "Moby Dick!!!!!!!!!!!!!!!" Go John Bonham!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

John Henry Bonham is the best Drummer to ever live. With Jimmy Page being one of the greatest guitarist. No wonder it was such a great group.

Aquinus · May 6, 2012, 04:09 AM

How do you think I would feel if I broke a bolt in the CPU socket on my LGA2011 board. The back plate is built into the motherboard. Now you're short a P9X79 Deluxe. That's one expensive brick. I like the socket being built into the motherboard because it keeps installation easy, but it makes you worry about the mount itself.

techguy31 · May 6, 2012, 04:11 AM

I know how it feels man.

stinger608 · May 6, 2012, 04:20 AM

Quote:

Originally Posted by mjkmike

^^ just got some new cans and should find one of the drives with that track on it.

Hell yea!!!!!! Been listing to it on a set of Logitech Z5500's!!!!!!! Frigging awesome when things are down!

stinger608 · May 6, 2012, 07:45 PM

Well crap, since this dang 2500K is on the back burner for yet another week, I am putting my little ION system crunching.

At least it will be another 4 cores crunching for the team. :-)

Chicken Patty · May 7, 2012, 05:46 AM

patience my friend. I own a DSM, and these things are nothing but headaches most of the time. I've owned it for over five years now and I love it to death. There's always setbacks my friend, take it easy, use this time to cool off and go at it once the new mounting hardware comes in! Keep us posted but don't sell it!

ThE_MaD_ShOt · May 7, 2012, 12:26 PM

Quote:

Originally Posted by Chicken Patty

patience my friend. I own a DSM, and these things are nothing but headaches most of the time. I've owned it for over five years now and I love it to death. There's always setbacks my friend, take it easy, use this time to cool off and go at it once the new mounting hardware comes in! Keep us posted but don't sell it!

Aint that the truth. Dsm stands for don't start monthly. I own 2 of the cursed things.

Chicken Patty · May 7, 2012, 11:41 PM

Quote:

Originally Posted by ThE_MaD_ShOt

Aint that the truth. Dsm stands for don't start monthly. I own 2 of the cursed things.

Bro, I gotta show you a video of my rear diff, holy crap! Thank god I just got my solid diff bushings in today! Going to do them, the subframe, and the driveshaft carrier bushings this weekend. My rear diff has play about two inches up and down! Insane!

So yeah, patience my friends, patience!

ThE_MaD_ShOt · May 8, 2012, 10:23 PM

Quote:

Originally Posted by Chicken Patty

Bro, I gotta show you a video of my rear diff, holy crap! Thank god I just got my solid diff bushings in today! Going to do them, the subframe, and the driveshaft carrier bushings this weekend. My rear diff has play about two inches up and down! Insane!

So yeah, patience my friends, patience!

Crap man. I haven't even though of checking mine. Maybe I should.

And for those who don't know what we are talking about.

This is a Dsm.

And Also this

And this is what we as Dsmers feel.

theoneandonlymrk · May 8, 2012, 10:44 PM

shit the Uk version of that pic looks so lame in my head , an escort turbo followed by a soup'd up fiesta 2L (200Bhp) both reasonable cars for a young hoodlem over here but they look funny imagineered into that pic

I too have a DSM and my last 5 Dsm's did me well for 1-3 years a piece, the trick is dont spend too much and have enough for the next shitter within reach(borrows count)

cheers for Dsm im keeping that one

ThE_MaD_ShOt · May 9, 2012, 01:16 AM

The Blue one I picked up for $800 with a wrecked clutch. I went in a rebuilt the engine and trans, also installed a Exedy clutch. Now it's a Daily driver.

Chicken Patty · May 10, 2012, 06:06 AM

Man, I got a huge task coming up with mine. Doing Drive shaft Carrier Bushings, Rear Diff Bushings and Rear Subframe bushings. Yep

ThE_MaD_ShOt · May 11, 2012, 12:13 AM

Man I pitty you on the carrier bearings. The diff and subframe aren't bad but that little bastard in the drive shaft sucks. I got to change the clutch Mc tomorrow in the blue one. Great fun..

brandonwh64 · May 11, 2012, 12:18 AM

I just wished I could find a fixable 1G for a good price. Around here they are either been to mexico or back (yea RICEd to the MAX) or they are in the junk yards with too much wrong.

ThE_MaD_ShOt · May 11, 2012, 12:28 AM

Hell if you where close enough I would cut you a deal on old blue. Ol red and me will never part ways. I really only need one dsm.

brandonwh64 · May 11, 2012, 12:32 AM

Quote:

Originally Posted by ThE_MaD_ShOt

Hell if you where close enough I would cut you a deal on old blue. Ol red and me will never part ways. I really only need one dsm.

HMMM I know if we did you would have more crunchers cause I would be getting rid of them and driving ole blue home! There is one local on craigslist but jumped time and has bent valves for 1250$ too much honestly. If I had to get that I would do gates timing belt with hydraulic pulley, balance shaft removal and 272 cams but.... I wish

I had a 1996 DSM with a 420A but it was a POS for sure!

micropage7 · May 11, 2012, 12:34 AM

Quote:

Originally Posted by ThE_MaD_ShOt

Crap man. I haven't even though of checking mine. Maybe I should.

And for those who don't know what we are talking about.

This is a Dsm.

http://i865.photobucket.com/albums/a...cars/Mycar.jpg

And Also this

http://i865.photobucket.com/albums/a...ars/clipse.jpg

And this is what we as Dsmers feel.

http://i865.photobucket.com/albums/a...cars/dsm21.jpg

but the design looks good

May 5, 2012, 10:42 PM	#1
stinger608 Eligible for custom title Join Date: Nov 2008 Location: Wyoming Posts: 5,476 (3.32/day) Thanks: 7,844 Thanked 2,526 Times in 1,774 Posts System Specs	Grrrrrrr!!!!!!! (Screw broke off CPU water block) Jesus, right in the middle of FINALLY assembling my 2500K system to start crunching and a fucking screw frigging broke off on the CPU waterblock mounting plate!!! I have a sneaking suspicion that the damn thing was fucked up from the get go! Got a Swiftech GTZ awhile back and noticed that two of the mounting screws had, in the past, been installed with a screw driver rather than the outer thumb screw usage. A couple of them went in kind of tough but were going in okay. Was adjusting from side to side when one of them just let go! Was using my fingers to tighten them. That is what makes me believe there was a crack in that screw to start with. None the frigging less, this fucking build is, once again, put on the damn back burner until I can pick up the back plate and screws! Naturally the mounting screw broke off flush with the back plate. God Damn It, I am about to sell this shit off guys!!!! Every damn time I go to put this system together, some other fucking crap happens! On a good note, I did get the pump and res mounted and plumbed. __________________ #3 Forever A Fan! Just Because I Don't Care Doesn't Mean I Don't Understand My HeatWare Check our team Status on Free-DC

System Name:	Sniper
Processor:	Intel Ivy Bridge i7 3770K
Motherboard:	Biostar TZ77A
Cooling:	total liquid cooling
Memory:	16GB Crucial Ballistix Tactical DDR3 1866
Video Card:	HIS HD7870 Turbo
Hard Disk:	2x Western Digital 300gb VRaptor HLFS Enterprise RAID 0
Optical Drive:	LG Super Multi Blue/Blue Ray burner
CRT/LCD Model:	HannsG HH231 23" & HP W2338H 23"
Case:	Cooler Master Sniper with side window
Sound Card:	On board
PSU:	Seasonic X series 750 watt total modular
Software:	Windows 7 Ultimate 64bit

May 5, 2012, 11:09 PM	#2
bogmali In Orbe Terrum Non Visi Join Date: Mar 2008 Location: Olympia, WA Posts: 6,038 (3.19/day) Thanks: 1,194 Thanked 4,109 Times in 2,080 Posts System Specs	You feel better now? __________________ “I have pretty much own every card known to man. what should I use?” -W1zzard “I quit smoking pot a while ago.. but not today” -erocker HEATWARE My F/S Thread

System Name:	Main/Server
Processor:	Core i7-3820 @4.0Ghz/i7-2600K
Motherboard:	Gigabyte X79-UD3/Gigabyte Z68A-D3H-B3
Cooling:	Corsair H70/CoolIt Vantage ALC
Memory:	Samsung MV-3V4G3D/US DDR3-1600 4X4GB/Kingston KVR16N11K2/16 2X8GB
Video Card:	MSI GTX660ti Power Edition/EVGA GTX-680
Hard Disk:	Samsung 830 256GB SSD, Seagate 320GB/Samsung 840 256GB SSD, 2 WD Green 1.5TB
Optical Drive:	Samsung DVD/LG DVD-RW/NEC DVD-RW ND-3540A
CRT/LCD Model:	LG Flatron E2350V
Case:	Antec Eleven Hundred/Rocketfish Case (Lian-Li made)
Sound Card:	Onboard
PSU:	Enermax Infinity 720W/Rosewill Xtreme 950W
Software:	Win7 Ultimate 64 /Win7 Professional
Benchmarks:	Xbox Live Gamertag=jondonken

System Name:	Sniper
Processor:	Intel Ivy Bridge i7 3770K
Motherboard:	Biostar TZ77A
Cooling:	total liquid cooling
Memory:	16GB Crucial Ballistix Tactical DDR3 1866
Video Card:	HIS HD7870 Turbo
Hard Disk:	2x Western Digital 300gb VRaptor HLFS Enterprise RAID 0
Optical Drive:	LG Super Multi Blue/Blue Ray burner
CRT/LCD Model:	HannsG HH231 23" & HP W2338H 23"
Case:	Cooler Master Sniper with side window
Sound Card:	On board
PSU:	Seasonic X series 750 watt total modular
Software:	Windows 7 Ultimate 64bit

May 6, 2012, 12:12 AM	#4
KieX Join Date: Dec 2009 Location: A Coruña, Spain Posts: 2,050 (1.64/day) Thanks: 6,950 Thanked 2,643 Times in 1,136 Posts System Specs	You forgot the [rant][/rant] tags stinger. Being SB, there's still BSOD 124's to play with once it's up and running Anyway, good luck with that build/re-sale __________________

System Name:	Slick
Processor:	Intel i5 2467M
Motherboard:	Samsung Series 5 Ultrabook
Memory:	8GB Corsair Value
Hard Disk:	Crucial M4 7mm 256GB
CRT/LCD Model:	13"
Software:	Windows 8 Pro x64

May 6, 2012, 12:26 AM	#5
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,742 (6.95/day) Thanks: 2,536 Thanked 2,443 Times in 1,468 Posts System Specs	Hey stinger if you want to send the block to me I can see what I can do with extracting the broken screw and repairing the threads. We also do machine work at my job. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	Selene / Yoda / Xp Gaming rig
Processor:	Phenom II x6 1090t @ 3.6 / Phenom II x6 1055t @ 3.2 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	CM Hyper 212+ / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 4gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek Hd7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 750 watt / Corsair TX 650 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

May 6, 2012, 12:31 AM	#6
mjkmike Join Date: Feb 2010 Location: Alberta,Canada Posts: 1,480 (1.24/day) Thanks: 2,690 Thanked 3,746 Times in 980 Posts System Specs	Try super glue on a screw driver you don't need. Just rember to let it set. __________________ Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex

Processor:	just a few i7's all AMD's gone to friends
Motherboard:	Mother F%#@& am I board
Cooling:	It's called Alberta Canada.
Memory:	Don't remember.
Video Card:	Hope for blckjack
Hard Disk:	hurt my toe's when droped
Optical Drive:	need new glasses
CRT/LCD Model:	never big enough
Case:	I think they call it a lost case
Sound Card:	What speek up I'm old.
PSU:	Good old coffee
Software:	when you get this old everything is soft
Benchmarks:	Always on the bench never on the field.

May 6, 2012, 12:54 AM	#8
mjkmike Join Date: Feb 2010 Location: Alberta,Canada Posts: 1,480 (1.24/day) Thanks: 2,690 Thanked 3,746 Times in 980 Posts System Specs	^^ just got some new cans and should find one of the drives with that track on it. __________________ Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex

May 6, 2012, 04:09 AM	#10
Aquinus Join Date: Jan 2012 Location: Dover, New Hampshire, USA Posts: 4,240 (8.86/day) Thanks: 1,264 Thanked 1,320 Times in 979 Posts System Specs	How do you think I would feel if I broke a bolt in the CPU socket on my LGA2011 board. The back plate is built into the motherboard. Now you're short a P9X79 Deluxe. That's one expensive brick. I like the socket being built into the motherboard because it keeps installation easy, but it makes you worry about the mount itself. __________________ MyHeat

System Name:	Kratos
Processor:	Intel Core i7 3820 @ 4.37Ghz (128.6x34) 1.384-1.395v (LLC)
Motherboard:	ASUS P9X79 Deluxe
Cooling:	Zalman CPNS9900MAX 130mm
Memory:	G.Skill DDR3-2400, 16gb (4x4gb) @ 10-12-11-30-108-1T 1.65v
Video Card:	2x AMD (MSI branded) Radeon HD 6870 (Crossfire)
Hard Disk:	2x120Gb SATA3 Corsair Force GT Raid-0, 3x1Tb SATA2 RAID-5
Optical Drive:	Asus DVD Burner on Marval SATA3 Controller
CRT/LCD Model:	28" Hanspree, 22" MAG Innovision. Both DVI
Case:	Antec 1200
Sound Card:	Realtek® ALC898 8-Channel High Definition Audio
PSU:	Seasonic 1000-watt 80 PLUS Platinum
Software:	Windows 7 x64 Professional

May 6, 2012, 04:11 AM	#11
techguy31 Join Date: May 2010 Posts: 461 (0.42/day) Thanks: 57 Thanked 43 Times in 41 Posts System Specs	I know how it feels man.

System Name:	Home Theatre
Processor:	i5 750
Motherboard:	Gigabyte P55 USB3
Memory:	4GB ADATA 1333
Video Card:	Sapphire 1GB ATI 5670
Hard Disk:	32gb Kingston SSD (Os)/ 1TB and 640GB Caviar Blue (Storage)
CRT/LCD Model:	Sony KDL40HX800
Case:	Cooler Master HAF 922
Sound Card:	HT Claro Plus
PSU:	Corsair HX650
Software:	Windows 7 64-bit

May 6, 2012, 07:45 PM	#13
stinger608 Eligible for custom title Join Date: Nov 2008 Location: Wyoming Posts: 5,476 (3.32/day) Thanks: 7,844 Thanked 2,526 Times in 1,774 Posts System Specs	Well crap, since this dang 2500K is on the back burner for yet another week, I am putting my little ION system crunching. At least it will be another 4 cores crunching for the team. :-) __________________ #3 Forever A Fan! Just Because I Don't Care Doesn't Mean I Don't Understand My HeatWare Check our team Status on Free-DC

May 7, 2012, 05:46 AM	#14
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.93/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	patience my friend. I own a DSM, and these things are nothing but headaches most of the time. I've owned it for over five years now and I love it to death. There's always setbacks my friend, take it easy, use this time to cool off and go at it once the new mounting hardware comes in! Keep us posted but don't sell it! __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

May 8, 2012, 10:44 PM	#18
theoneandonlymrk Join Date: Mar 2010 Location: republic of mancunia UK Posts: 2,205 (1.89/day) Thanks: 845 Thanked 363 Times in 303 Posts System Specs	shit the Uk version of that pic looks so lame in my head , an escort turbo followed by a soup'd up fiesta 2L (200Bhp) both reasonable cars for a young hoodlem over here but they look funny imagineered into that pic I too have a DSM and my last 5 Dsm's did me well for 1-3 years a piece, the trick is dont spend too much and have enough for the next shitter within reach(borrows count) cheers for Dsm im keeping that one __________________

System Name:	Quad GT V evo / eeaaagle
Processor:	FX8350 @ 4.9 / PII 960T 3.6
Motherboard:	Asus Crosshair V formula/ asus 970A-DS3
Cooling:	240+320 rad, cpu,5870,5850,NB/Vrm blocks all EK /Hyper212 TT mod'd
Memory:	2x4Gig Mushkin blackline 2133 @2133 cas10/ ocz flex2 2x2Gb
Video Card:	5870+5850 960Gpu 1200mem gtx460x2(physx)/ nVidia GTs240
Hard Disk:	2xsamsung 840(std), WD 1Tb+2Tb grn/ Revox2 120Gig ,2xWD 250's raid 0
Optical Drive:	pioneer dvd writer/ pioneer dvd writer
CRT/LCD Model:	HannsG 23" sony bravia 32", hd ready projector (footy)/headless(24/7) + sony tv
Case:	Custom(modded) thermaltake Kandalf / random black rubbish
Sound Card:	Xfi creative 7.1 on board / low fi realtek onboard
PSU:	corsair 1200AX / modded corsair 850TX
Software:	Win8 Pro.win7 Ultimate x64 licensed
Benchmarks:	13.62K best overall sandra so far, Unigine 2500 @1680x1050 default, 3dmark11 8534 3dmark firestrike

May 9, 2012, 01:16 AM	#19
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,742 (6.95/day) Thanks: 2,536 Thanked 2,443 Times in 1,468 Posts System Specs	The Blue one I picked up for $800 with a wrecked clutch. I went in a rebuilt the engine and trans, also installed a Exedy clutch. Now it's a Daily driver. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

May 10, 2012, 06:06 AM	#20
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.93/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	Man, I got a huge task coming up with mine. Doing Drive shaft Carrier Bushings, Rear Diff Bushings and Rear Subframe bushings. Yep __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

May 11, 2012, 12:13 AM	#21
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,742 (6.95/day) Thanks: 2,536 Thanked 2,443 Times in 1,468 Posts System Specs	Man I pitty you on the carrier bearings. The diff and subframe aren't bad but that little bastard in the drive shaft sucks. I got to change the clutch Mc tomorrow in the blue one. Great fun.. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

May 11, 2012, 12:18 AM	#22
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,562 (10.03/day) Thanks: 2,145 Thanked 5,338 Times in 3,695 Posts System Specs	I just wished I could find a fixable 1G for a good price. Around here they are either been to mexico or back (yea RICEd to the MAX) or they are in the junk yards with too much wrong. __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

May 11, 2012, 12:28 AM	#23
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,742 (6.95/day) Thanks: 2,536 Thanked 2,443 Times in 1,468 Posts System Specs	Hell if you where close enough I would cut you a deal on old blue. Ol red and me will never part ways. I really only need one dsm. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	micropage7
Processor:	phenom x4 955 Black Edition @ Stock
Motherboard:	Asrock 990FX
Cooling:	Xigmatek HDT-SD964
Memory:	8Gb Team Xtreem DDR3
Video Card:	Radeon 5570 CrossFire
Hard Disk:	Seagate 160Gb, 250Gb & 500Gb SATA
Optical Drive:	LG DVDRW, Samsung Combo
CRT/LCD Model:	LG 19 inch LCD Wide Screen
Case:	Lian Li PC-7FNW
Sound Card:	Creative Audigy Value
PSU:	VenomRX Red Diamond 650 Watt
Software:	Windows 7 64-bit
Benchmarks:	Classified

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FS] FS: Swiftech Apogee XT CPU Water Block + Danger Den Maze GPU Water Block (Universal)	[AK]Zip	Buy/Sell/Trade/Giveaway Forum	3	Jul 20, 2011 01:01 AM
[WTB] CPU water block + fittings	adcom32	Buy/Sell/Trade/Giveaway Forum	12	Mar 26, 2010 10:34 PM
[WTB][US] Socket 1156 CPU water block	sneekypeet	Buy/Sell/Trade/Giveaway Forum	6	Mar 11, 2010 12:54 AM
1 pin broke off my 939 cpu	KieranD	General Hardware	54	May 17, 2009 02:35 PM
[FS] Swiftech Apogee GT CPU water-block	TheScavenger	Buy/Sell/Trade/Giveaway Forum	4	Nov 17, 2008 06:33 PM