7970 DCII voltage locked, how to unlock it?

[radrok]

Originally Posted by psyside

I ended up getting 680DCII should be here in 2 days, way to much hassle and gambling with 7970DCII cards....

With no voltage control either man.

Can't wait for the HD 7970 Matrix, it has voltage plug sockets so you can link it directly to a Rampage IV or Maximus V without soldering.

[psyside]

I know but they overclock to 1300 like np, so its fine.

[Fimconte]

Originally Posted by Iactus

gThey fly when hardmodded.

I suspect that guys unlock did nothing but mafe it seem it uped the volts.

If it did he would hit 1.25gz easy.

So it seems they are still locked.

I will be hardware modding mine

I'm not so sure about that.
For example when I leave the core at default (925) and only increase voltage, I do get thermal increase (Hit 100c+ with 1.250)

However I also get the "stuck at" 1.08v bug whenever I hardlock the system.
I think this is because my motherboard might change some settings in bios to ensure "boot" after hardlock.

Hence having to flash default bios->reboot->flash test bios->reboot after every hardlock can get annoying.


Anyway the store where I bought from said they can't offer a refund unless there's some technical problem (locked voltage is working as intended apparently, thanks Asus!)...
So I'm stuck for a while with this card.


P.S.
Did some testing between 1.225 - 1.190,
Best I managed was 1150 core / 5500 memory @1207mv, while with both test and stock bios I get 1160 core / 6000 memory @1175mv...

Anyway went back to original bios, since I plan on fiddling with the CPU overclock instead and thanks to the 1080mv bug and no gain from unlocked bios for me at least.

That said, there might be two issues affecting my success.

a) High Temperatures I have the Silverstone FT02 and vertically mounted DCII cooler might not perform optimally, but there's mixed reports on that.
I did get absurd temps (105c+@1225mv) so there's that.

b) vdroop. Currently running 1175mv in GPUTweak, reads 1158mv idle , 1097mv under full load (Xtreme Burn-in Furmark).
Interestingly in BF3 the voltage doesn't drop lower than 1152, so maybe it's just furmark pushing absurd loads onto the gpu. Granted I haven't tested it out on full servers yet, only empty conquest large maps.


I remembered that when I had huge problems with P5Q-Deluxe a few years back I promised never to buy another Asus product... I should've stayed true to that promise

[Iactus]

i dont think your vcore actually raised at all mate

I can get 1150 @ 1.080v.... vdroop down to 1.064v

[Fimconte]

Originally Posted by Iactus

i dont think your vcore actually raised at all mate

I can get 1150 @ 1.080v.... vdroop down to 1.064v

What causes the extra heat then?

[Iactus]

i dont know, But if the voltage did raise you would see a good overclock, this is based on when you hardmod one of these you can get very nice clocks with the added voltage

[Chrisoldinho]

Hi all,

Looking for some help, made a real mess up of flashing a 7970 DCII TOP.

To cut a long story short, both BIOS's have been flashed with the Test BIOS http://www.techpowerup.com/vgabios/1...72.120104.html and I have no backup BIOS's (crazy I know...)

I use a single DVI cable to connect to my monitor, currently I get no display output whatsoever.
I have a spare PCI-E card that I can run to get atiflash up and running and then put the TOP card into a second PCI-E slot to flash it back again.

I recall seeing the stock BIOS being an something along the lines of ***.AS05.U3, when I check the VGA database, I see there is a BIOS 6798.15.12.0.4.AS05.U3 so I am thinking of flashing this one across as I believe it will match what I was running before.

The second problem I am going to have is that it was my understanding:-

Bios Number 1 Is for Dual link DVI and only 2 DP ports
Bios Number 2 is for Single Link DVI and all display ports

As I don't know which BIOS has been uploaded to the techpowerup database, it's likely I am going to loose some functionality on the card (if I can get it working again).

As you can see, I have some thoughts on how to fix it, but would welcome any additional advice before I do anything else.

Thanks

[Chrisoldinho]

Fixed it, back up and running again

[Iactus]

any news ?

[Fimconte]

Originally Posted by Iactus

any news ?

Well I inquired with Asus Nordic and they said they are aware of the issue and that it's been forwarded to the BIOS team...
But that's the same response that's been given to others before.

So most likely we're SoL as Asus is probably not supporting this card actively any more.


I went back to the original BIOS and managed a decent overclock @ 1130mhz core, 1705mhz memory.
Not quite in the 1250+/1800+ range that some other 7970s can do, but with locked voltage our hands seem tied.

[vadimua]

GPU Tweak 2.2.1.4

[crazyeyesreaper]

^ yea good luck with that one i already tested it voltage is unlocked yes but your limited to 1125 max. have to mix and match gpu oc tools which resulted in some fun BSODs

[vadimua]

voltage unlocked
frequency unlocked
everything works fine
http://img.maryno.net/images/3fd0425...36014f4bc.jpeg

[crazyeyesreaper]

well thats nice but its not what im seeing tested it on two installs now and did a registry wipe of software to make sure no change.

But considering their are different variations of the Direct Cu II 7970 TOP available the software will work for some but not all.

[TiNo-man]

Originally Posted by razaron

Just now I managed to unlock the voltages. The only bad thing is that the voltages are stuck in 3d mode.
Anywho, here's how I did it:

- Download and unpack the ATIWinflash onto your desktop in a folder called "winflash"
- Save this BIOS in your Winflash folder and name it asus.rom
- Click Start Button
- Type "cmd"
- Right click the entry and select "Run as Administrator"
- Black command prompt windows opens
- Type "cd %USERPROFILE%\desktop\winflash"
- Type "atiwinflash -unlockrom 0" <-- the 0 means first adapter, if you have multiple cards, physically uninstall all but the one you want to flash
- Type "atiwinflash -f -p 0 asus.rom"
- It should complete the flashing process with a message saying something with "verified".


This is a copypasta from w1z with some modifications.

EDIT: I'm not sure why, but, my Heaven score has increased...
EDIT2: I changed the 2d clock to the lowest it will go, 465/2760 @943mV. It used to idle at 33C, now it idles at 40C.

I do all this but i get"eror" now my ASUS 7970DC2T won't boot anymore
I think i flash on first bios,which is write protected.On7970DC2 dont write which is factory protected bios.I try to get back with factory bios,but wont work.No i cant bot my card from that bios.And which is write protected bios?
PLEASE HELP

[Jacksonn24]

i used the asus tweek that was posted that allows move voltage and afterburner and got higher OC on core from 1150 up to 1202 so idk if it increases voltage but 1st time i could ever run 3dmark 11 over 1150/1650 i just ran it at 1202/1651

[MxPhenom 216]

So wait, you got a 7970 DCII and tried tweaking the voltage. You couldn't then you got a GTX680 DCII thats also voltage locked?

And don't believe what you see online about the GPU being able to clock to 1300+. I thought the 680 I got could do 1300+ and even maybe hit 1400 on water, and that definitely didn't happen. But good luck, I think you might be surprised. A lot of Kepler cards are averaging out at 1250mhz.

[p3gaz_001]

Originally Posted by MxPhenom 216

So wait, you got a 7970 DCII and tried tweaking the voltage. You couldn't then you got a GTX680 DCII thats also voltage locked?

And don't believe what you see online about the GPU being able to clock to 1300+. I thought the 680 I got could do 1300+ and even maybe hit 1400 on water, and that definitely didn't happen. But good luck, I think you might be surprised. A lot of Kepler cards are averaging out at 1250mhz.

one of my 2 680L does 1437mhz on stock cooler @ +150mv

[dannygunit007]

this has fucked my card
when I turn on my motherboard stays indication LED at 62
not start
not even enter the bios
I think as my asus killed: (
if saves as reset the bios manually with me please Back
my email is leandrogunit007@hotmail.com



- Download and unpack the ATIWinflash onto your desktop in a folder called "winflash"
- Save this BIOS in your Winflash folder and name it asus.rom
- Click Start Button
- Type "cmd"
- Right click the entry and select "Run as Administrator"
- Black command prompt windows opens
- Type "cd %USERPROFILE%\desktop\winflash"
- Type "atiwinflash -unlockrom 0" <-- the 0 means first adapter, if you have multiple cards, physically uninstall all but the one you want to flash
- Type "atiwinflash -f -p 0 asus.rom"
- It should complete the flashing process with a message saying something with "verified".


This is a copypasta from w1z with some modifications.

EDIT: I'm not sure why, but, my Heaven score has increased...
EDIT2: I changed the 2d clock to the lowest it will go, 465/2760 @943mV. It used to idle at 33C, now it idles at 40C.[/QUOTE]