techPowerUp! Forums

Go Back   techPowerUp! Forums > www.techpowerup.com > News

Reply
 
Thread Tools
Old Jun 25, 2012, 09:12 AM   #1
btarunr
Editor & Senior Moderator
 
btarunr's Avatar
 
Join Date: Oct 2007
Location: Hyderabad, India
Posts: 14,983 (7.29/day)
Thanks: 788
Thanked 12,911 Times in 5,655 Posts
Send a message via AIM to btarunr Send a message via MSN to btarunr

System Specs

Lian Li Announces EATX Supported Chassis with Front Placed PSU - PC-V750

Lian-Li Industrial Co. Ltd, today announces a brushed aluminum EATX supported chassis with a front placed PSU – PC-V750. With the power supply placed in the front, the PC-V750 can hold the hardware that enthusiasts desire while keeping a smaller footprint.

Shorter than most EATX supporting chassis, the 440mm (17.32”) tall PC-V750 can hold up to six 3.5” hard drives with hotswap capabilities in the HDD cage with one 2.5” at the bottom of the cage. Two more 2.5” drives can be installed if only four 3.5” drives are in the cage.



For users who don't want an optical drive, an additional 3.5” drive can be put in the 5.25” bay. Two more 3.5” or three more 2.5” hard drives can be placed on the floor on the chassis adding even more storage potential.

Under the HDD bay a standard ATX power supply can be comfortably placed. A pre-routed cable for the power supply wraps around behind the motherboard tray for plug access in the rear of the chassis. The PC-V750 provides ventilation slits underneath the PSU with a removable pull-out filter to help increase the life and performance of the power supply.

The PC-V750 has ten expansion slots for future upgradeability. Graphics cards up to 380mm in length can fit, and an arm helps to support longer cards.

Five well-placed fans keep your hardware at optimal operating temperatures. Two front 120mm fans blow cool air directly on the HDD rack. Dual top 120mm and one rear 120mm fans keep the cool air circulating throughout the case by pulling hot air out of the chassis. Additionally, the Lian Li PC-V750 supports water cooling with two rubber grommet holes.

On the front I/O panel there are two USB 3.0, one USB 2.0, one e-SATA and HD audio ports providing high connectivity capabilities.

Because details are important, this elegant brushed aluminum chassis has many features that DIY builders can appreciate such as easy-to-remove pop-off panels for simple installations and upgrades and sturdy aluminum feet with rubber bottoms to reduce vibrations.

The PC-V750 comes in three varieties: silver (PC-V750A), black (PC-V750B), and internal black with a side panel window (PC-V750WX).



For more information, visit the product page.
btarunr is offline  
Reply With Quote
The Following 2 Users Say Thank You to btarunr For This Useful Post:
Old Jun 25, 2012, 09:17 AM   #2
TacoTown
1000 Posts
 
TacoTown's Avatar
 
Join Date: Jun 2011
Location: Canadia
Posts: 1,826 (2.53/day)
Thanks: 1,755
Thanked 927 Times in 551 Posts

System Specs

When you said front mounted psu I thought it was going to look retarded with a cae sticking out the front, but this looks kinda cool.
__________________
Can I see your brown ninja?

I ate a taco for the first time ever today. Feb 27/2012
Steam: TacoTown
Origin: TheTacoTown
TacoTown is offline  
Reply With Quote
Old Jun 25, 2012, 10:13 AM   #3
entropy13
2000 Posts
 
entropy13's Avatar
 
Join Date: Mar 2009
Location: Philippines
Posts: 3,425 (2.22/day)
Thanks: 42
Thanked 1,133 Times in 714 Posts

System Specs

It'll probably be at least $250...
__________________
MSI P67A-GD65 (B3), Intel Core i5 2500K, Corsair H60, 2x MSI GTX 570 Twin Frozr II/OC, G.Skill RipjawsX (2x4GB) DDR3-1600 RAM, OCZ Agility 3 120GB + 2TB, Corsair AX1200, Corsair Carbide 400R

MSI Z68MA-ED55, i5 2500K, Noctua NH-U9B SE2, Inno3D GTX 570, Corsair Vengeance LP 8GB, OCZ Agility 3 120GB + 1TB, Seasonic X660, Lian Li PC-V600FB

The Big Useful List of Free Useful Programs To Use Usually For Free
entropy13 is online now  
Reply With Quote
Old Jun 25, 2012, 10:31 AM   #4
Totally
25 Posts
 
Join Date: Nov 2010
Location: Right where I want to be
Posts: 65 (0.07/day)
Thanks: 4
Thanked 10 Times in 9 Posts

Don't see a the point of this case compared to their other offerings. Lot's of cons, too few, if any pros.
Totally is offline  
Reply With Quote
The Following User Says Thank You to Totally For This Useful Post:
Old Jun 25, 2012, 12:47 PM   #5
Vancha
200 Posts
 
Join Date: Jun 2010
Posts: 328 (0.31/day)
Thanks: 16
Thanked 60 Times in 48 Posts

I reckon the guys over at Lian Li are just really, really bored.
Vancha is offline  
Reply With Quote
Old Jun 25, 2012, 01:41 PM   #6
Shinshin
25 Posts
 
Join Date: Sep 2010
Posts: 52 (0.05/day)
Thanks: 0
Thanked 6 Times in 5 Posts

I was puzzled at first, but the design is really nice.
The point of this is that you can fit EATX motherboards in a smaller case than was possible before....
Shinshin is offline  
Reply With Quote
Old Jun 25, 2012, 01:51 PM   #7
Comenius
5 Posts
 
Comenius's Avatar
 
Join Date: Jan 2012
Posts: 7 (0.01/day)
Thanks: 1
Thanked 0 Times in 0 Posts

Why do Lian Li press releases never mention when their products will be available for sale?
Comenius is offline  
Reply With Quote
Old Jun 25, 2012, 02:01 PM   #8
Totally
25 Posts
 
Join Date: Nov 2010
Location: Right where I want to be
Posts: 65 (0.07/day)
Thanks: 4
Thanked 10 Times in 9 Posts

Quote:
Originally Posted by Shinshin View Post
I was puzzled at first, but the design is really nice.
The point of this is that you can fit EATX motherboards in a smaller case than was possible before....
But if you are going EATX, a compact case isn't going to be what you are looking for, and cooling options are going to be very limited.
Totally is offline  
Reply With Quote
Old Jun 25, 2012, 02:05 PM   #9
blibba
500 Posts
 
blibba's Avatar
 
Join Date: Oct 2009
Location: Oxford, UK
Posts: 777 (0.59/day)
Thanks: 109
Thanked 167 Times in 113 Posts

System Specs

Aren't those front intakes just going to take in hot air from the PSU exhaust?
__________________
Heatware.
eBay feedback.
blibba is offline  
Reply With Quote
Old Jun 25, 2012, 02:29 PM   #10
Jizzler
2000 Posts
 
Jizzler's Avatar
 
Join Date: Aug 2007
Location: Geneva, FL, USA
Posts: 3,010 (1.42/day)
Thanks: 567
Thanked 606 Times in 487 Posts

System Specs

Very nice, another win for Lian-Li!

Front panel buttons/ports centered, black interior/window options, nice use of space, 10 slot, simple and clean exterior styling.
Jizzler is offline  
Reply With Quote
Old Jun 25, 2012, 02:32 PM   #11
Widjaja
3500 Posts
 
Widjaja's Avatar
 
Join Date: Jun 2007
Location: Wangas, New Zealand
Posts: 4,023 (1.85/day)
Thanks: 241
Thanked 617 Times in 534 Posts

System Specs

Nothing reminiscent of a transformer.
I like it.
Widjaja is offline  
Reply With Quote
The Following User Says Thank You to Widjaja For This Useful Post:
Old Jun 25, 2012, 03:19 PM   #12
radrok
1000 Posts
 
radrok's Avatar
 
Join Date: Oct 2011
Location: Italy
Posts: 1,908 (3.31/day)
Thanks: 143
Thanked 463 Times in 365 Posts
Send a message via Skype™ to radrok

System Specs

Brushed Aluminum <3
radrok is offline  
Reply With Quote
Old Jun 25, 2012, 05:06 PM   #13
Bjorn_Of_Iceland
2000 Posts
 
Bjorn_Of_Iceland's Avatar
 
Join Date: Jan 2008
Location: Húsið mitt
Posts: 2,608 (1.32/day)
Thanks: 480
Thanked 358 Times in 266 Posts

System Specs

deym, I want one
__________________

SIEG HEIL!!
Bjorn_Of_Iceland is offline  
Reply With Quote
Old Jun 25, 2012, 06:00 PM   #14
sc
25 Posts
 
Join Date: Mar 2012
Posts: 63 (0.15/day)
Thanks: 10
Thanked 16 Times in 5 Posts

Why can't they make a case designed with a real life scenario in mind?

I am sure there are a lot of people like me that use NAS and don't give a damn about the gazillion 3.5" bays all the cases seem to have nowadays.

For example I don't need more than two 3.5" bays (SSDs and HDD) but I could use two 5.25" bays for a reservoir/fan controller/whatever, a proper mounted PSU and space to mount a few rads or fans if I were to go on air.
sc is offline  
Reply With Quote
Old Jun 25, 2012, 06:38 PM   #15
csendesmark
200 Posts
 
csendesmark's Avatar
 
Join Date: Mar 2008
Location: EU/Hungary
Posts: 330 (0.17/day)
Thanks: 23
Thanked 23 Times in 17 Posts
Send a message via MSN to csendesmark Send a message via Skype™ to csendesmark

System Specs

Awwh!!! Very nice case! I love it
__________________
Core i7 950 @ 4,2GHz | Gigabyte GA-EX58-EXTREME | 3 × 2GB DDR3-1866 | Sapphire Radeon HD 6970-2048 | Corsair TX750 | Sabayon Linux | Opera | TeamFortress 2 | Left 4 Dead 2 | StarCraft 2 | $11€
TECH-POWER-UP
csendesmark is offline  
Reply With Quote
Old Jun 25, 2012, 06:39 PM   #16
radrok
1000 Posts
 
radrok's Avatar
 
Join Date: Oct 2011
Location: Italy
Posts: 1,908 (3.31/day)
Thanks: 143
Thanked 463 Times in 365 Posts
Send a message via Skype™ to radrok

System Specs

Quote:
Originally Posted by sc View Post
Why can't they make a case designed with a real life scenario in mind?

I am sure there are a lot of people like me that use NAS and don't give a damn about the gazillion 3.5" bays all the cases seem to have nowadays.

For example I don't need more than two 3.5" bays (SSDs and HDD) but I could use two 5.25" bays for a reservoir/fan controller/whatever, a proper mounted PSU and space to mount a few rads or fans if I were to go on air.
You know, many cases are modular, especially premium ones like Lian Li... I'm pretty sure you can remove those bays and put a radiator on the front.
radrok is offline  
Reply With Quote
Old Jun 25, 2012, 07:09 PM   #17
theJesus
2000 Posts
 
theJesus's Avatar
 
Join Date: Jul 2008
Location: Canton, Ohio
Posts: 3,116 (1.76/day)
Thanks: 2,301
Thanked 865 Times in 612 Posts

System Specs

Quote:
Originally Posted by Totally View Post
But if you are going EATX, a compact case isn't going to be what you are looking for, and cooling options are going to be very limited.
I think you're wrong. I'm sure there are people who would like to go EATX, but don't want a large case.
__________________
HEAT
“congratulations! you have successfully been inflicted with tpuitis! symptons include: prolonged computer usage, urge to make tpu your homepage, posting at rapid posts-per-day ratios (also known as post whoring), and the urge to waste lots of money on high end computer hardware that you dont need!” -panchoman
“Modding to me is something best shared with others.... Kind of like a fine wine, but without the drunk driving arrest and hangovers.” -MKmods
“i'm going to punch you in the face now Jesus..” -BumbleBee
theJesus is offline  
Reply With Quote
Old Jun 25, 2012, 07:34 PM   #18
Jacez44
25 Posts
 
Join Date: Apr 2012
Location: Givatayim
Posts: 35 (0.09/day)
Thanks: 4
Thanked 6 Times in 4 Posts

System Specs

Can hold 6 HDD's SAFELY. SAFELY, Damnit.

I can fit 16 in there with aftermarket/DIY brackets..
Jacez44 is offline  
Reply With Quote
Old Jun 25, 2012, 07:57 PM   #19
Assimilator
200 Posts
 
Assimilator's Avatar
 
Join Date: Feb 2005
Location: South Africa
Posts: 425 (0.14/day)
Thanks: 113
Thanked 56 Times in 41 Posts

System Specs

Quote:
Originally Posted by entropy13 View Post
It'll probably be at least $250...
$319 for silver/black versions, $349 for the all-black interior: http://www.dailytech.com/article.aspx?newsid=25013
__________________
<html> <code> <style>

The QuadFather: 4x4x4x4
4 cores (QX9650) / 4 GPUs (2x 9800 GX2) / 4x 2GB DDR2-800 / 4 hard disks (quad 320GB Seagates, RAID-5)
Assimilator is offline  
Reply With Quote
Old Jun 25, 2012, 09:10 PM   #20
rpsgc
500 Posts
 
rpsgc's Avatar
 
Join Date: Feb 2007
Location: Portugal
Posts: 675 (0.29/day)
Thanks: 139
Thanked 128 Times in 93 Posts

System Specs

You all talk as if a front mounted PSU is unheard of.

http://www.silverstonetek.com/images...eft-Inside.jpg
__________________


IDE free since April/2007
SSD user since September/2009
rpsgc is offline  
Reply With Quote
Old Jun 25, 2012, 09:24 PM   #21
fochkoph
75 Posts
 
fochkoph's Avatar
 
Join Date: Nov 2008
Location: Fremont, CA
Posts: 151 (0.09/day)
Thanks: 22
Thanked 13 Times in 11 Posts
Send a message via AIM to fochkoph

System Specs

I really hate their windows.
fochkoph is offline  
Reply With Quote
Old Jun 25, 2012, 10:47 PM   #22
theJesus
2000 Posts
 
theJesus's Avatar
 
Join Date: Jul 2008
Location: Canton, Ohio
Posts: 3,116 (1.76/day)
Thanks: 2,301
Thanked 865 Times in 612 Posts

System Specs

Quote:
Originally Posted by rpsgc View Post
You all talk as if a front mounted PSU is unheard of.

http://www.silverstonetek.com/images...eft-Inside.jpg
I think it is for a conventional case.
__________________
HEAT
“congratulations! you have successfully been inflicted with tpuitis! symptons include: prolonged computer usage, urge to make tpu your homepage, posting at rapid posts-per-day ratios (also known as post whoring), and the urge to waste lots of money on high end computer hardware that you dont need!” -panchoman
“Modding to me is something best shared with others.... Kind of like a fine wine, but without the drunk driving arrest and hangovers.” -MKmods
“i'm going to punch you in the face now Jesus..” -BumbleBee
theJesus is offline  
Reply With Quote
Old Jun 26, 2012, 06:36 AM   #23
Vancha
200 Posts
 
Join Date: Jun 2010
Posts: 328 (0.31/day)
Thanks: 16
Thanked 60 Times in 48 Posts

Quote:
Originally Posted by fochkoph View Post
I really hate their windows.
...but it's too late. I've seen everything. I've seen it all.
Vancha is offline  
Reply With Quote
Old Jun 26, 2012, 07:12 AM   #24
micropage7
3500 Posts
 
micropage7's Avatar
 
Join Date: Mar 2010
Location: Jakarta, Indonesia
Posts: 3,674 (3.18/day)
Thanks: 190
Thanked 835 Times in 549 Posts

System Specs


so the psu push the hot air to the front
interesting but it would affect the intake air although a little
Attached Thumbnails
Click image for larger version

Name:	Capture.JPG
Views:	1689
Size:	25.7 KB
ID:	47585  
__________________
:: New Cases, Tips And All About Your Cases Visit CaseGear ::

Don't Ever Ask About Love And Honesty That You Don't Ever Have
micropage7 is offline  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lian Li Announces Their Smallest ATX Motherboard Supported Chassis - PC-V700 Cristian_25H News 16 Apr 11, 2012 07:53 PM
Lian Li Announces the PC-Q15 Mini-ITX Chassis Cristian_25H News 16 Mar 21, 2012 02:20 AM
Lian Li Announces PC-TU200 Mini-ITX Chassis btarunr News 15 Sep 23, 2011 10:32 PM
Lian Li Announces 'The Hammer' PC-90 Chassis btarunr News 23 Sep 5, 2011 03:11 PM
Lian Li Announces New Tyr PC-X500FX Chassis btarunr News 14 Dec 13, 2010 01:41 AM


All times are GMT. The time now is 10:58 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
no new posts