New Build

BrutalGG · Jul 10, 2012, 05:10 PM

I just the other day did a new Core i5 Ivy Bridge Build and I'm a little concerned about the Temps and was wondering if anyone could help me out.

The Build is as Follows:
Lanboy Air Case
GTX460
Corei5 3570k Overclocked to 4.2ghz 1.25v
8GB Patriot RAM
Samsung 830 SSD
Cooler Master Hyper 212 EVO

My Temps are as Follows:
33C at idle and around 80C full load with prime95

It may also might be relevant to note that my room temp is around 27-30C. Sometimes its cooler but being that its summer it can get a lil warm.

Thanks so much for any help in advance. Cheers

Elmo · Jul 10, 2012, 05:12 PM

yeh thats fine make sure its seated properly and nice case ! Oh and make sure you dont put to much thermal paste / spread evenly .

m1dg3t · Jul 10, 2012, 05:19 PM

First welcome to TPU!

Considering ambient temp, load seems OK. These chips run a tad warm when OCd & volt increase. If you can get ambient down to 24c you should see a nice drop in load temps.

Have you tried remounting the HSF and/or reapplying TIM?

If temps bug you that much delidding looks easy enough

Also these have a 105c tjmax IIRC so you have a ways to go before it starts to throttle itself

Elmo · Jul 10, 2012, 05:22 PM

Quote:

Originally Posted by m1dg3t

First welcome to TPU!

Considering ambient temp, load seems OK. These chips run a tad warm when OCd & volt increase. If you can get ambient down to 24c you should see a nice drop in load temps.

Have you tried remounting the HSF and/or reapplying TIM?

If temps bug you that much delidding looks easy enough

Also these have a 105c tjmax IIRC so you have a ways to go before it starts to throttle itself

I think his temps are fine , the next thing he needs is to get some ln2 !

BrutalGG · Jul 10, 2012, 05:41 PM

Thanks,
I do plan on reapplying TIM and remounting the cooler tonight to see if maybe it was an application error. I knew the chips ran hot but I wasn't able to find an exact threshold number and i thought that a 50C jump was a little extreme.
I Do have a little ways to go until i get into liquid Nitrogen.
Thanks for all the Help.
-Cheers

Elmo · Jul 10, 2012, 05:43 PM

Well the ln2 thing was a joke :s but sure go for it :P

BrutalGG · Jul 10, 2012, 05:44 PM

I figured its hard to translate joking tones into forum posts though

Mindweaver · Jul 10, 2012, 05:49 PM

Your temps look fine to me. If you didn't apply TIM correctly it wouldn't idle 33c. That cooler is great, but is a lot better if you add another 120mm fan for a push/pull. Just using 1x 120mm fan those temps seem fine.

I would buy 2x 120mm fans > 80cfm and add a fan control to adjust fan speeds when not gaming.

EDIT: I use 2x Scythe SY1225SL12SH 120mm "Slipstream"

Elmo · Jul 10, 2012, 05:53 PM

Quote:

Originally Posted by BrutalGG

I figured its hard to translate joking tones into forum posts though

Same thing as saying how facebook is emotionless when some one puts a smiley irl they arnt smiling . :s very common for any emoticon they put unless its really funny even if they say lol they arnt really loling :P and no im not smiling but this urggg its addicting

BrutalGG · Jul 12, 2012, 12:49 PM

Just Wanted To Give Everyone and update. I re-seated my Hyper212 evo with artic silver 5 rather than my zalman TIM and my max temp has now gone down to 68c-70c. Thanks so much

Cheers

Jul 10, 2012, 05:10 PM	#1
BrutalGG Join Date: Jul 2012 Location: Middle Of Nowhere Posts: 6 (0.02/day) Thanks: 1 Thanked 0 Times in 0 Posts System Specs	New Build I just the other day did a new Core i5 Ivy Bridge Build and I'm a little concerned about the Temps and was wondering if anyone could help me out. The Build is as Follows: Lanboy Air Case GTX460 Corei5 3570k Overclocked to 4.2ghz 1.25v 8GB Patriot RAM Samsung 830 SSD Cooler Master Hyper 212 EVO My Temps are as Follows: 33C at idle and around 80C full load with prime95 It may also might be relevant to note that my room temp is around 27-30C. Sometimes its cooler but being that its summer it can get a lil warm. Thanks so much for any help in advance. Cheers

System Name:	Gaming PC
Processor:	Core i5 3570k OC 4.2Ghz
Motherboard:	Asus P8Z77-V
Cooling:	Hyper 212 EVO
Memory:	8GB Patriot Gamer
Video Card:	GTX 460
Hard Disk:	120GB Samsung 830 SSD
Optical Drive:	DVD Burner
Case:	Lanboy Air
PSU:	Cougar 700W
Software:	Windows 7 Pro 64-bit

Jul 10, 2012, 05:12 PM	#2
Elmo Join Date: May 2012 Location: Malaysia Posts: 254 (0.70/day) Thanks: 16 Thanked 35 Times in 31 Posts System Specs	yeh thats fine make sure its seated properly and nice case ! Oh and make sure you dont put to much thermal paste / spread evenly . __________________ ⎝⏠⏝⏠⎠

System Name:	Balls
Processor:	I5 2400
Motherboard:	GA-H67MA-UD2H-B3
Memory:	16GB ddr3
Video Card:	1gb gddr5 evga gtx460
Hard Disk:	60gb corsair force3 120gb mushkin chronos 500gb wd green
Optical Drive:	24x dvdrw
CRT/LCD Model:	Samsung 23" led 1080p
PSU:	Cm 600w 80+
Software:	win7 ultimate 64 bit

Jul 10, 2012, 05:19 PM	#3
m1dg3t Join Date: May 2010 Location: Canada Posts: 1,910 (1.74/day) Thanks: 631 Thanked 429 Times in 353 Posts System Specs	First welcome to TPU! Considering ambient temp, load seems OK. These chips run a tad warm when OCd & volt increase. If you can get ambient down to 24c you should see a nice drop in load temps. Have you tried remounting the HSF and/or reapplying TIM? If temps bug you that much delidding looks easy enough Also these have a 105c tjmax IIRC so you have a ways to go before it starts to throttle itself __________________ Why dazzle 'em with brilliance when you can baffle 'em with bullshit. Alterius non sit, qui potest esse sui! Und setzet ihr nicht das leben ein, Nie wird euch das leben gewonnen sein! If knowledge is power, then ignorance is bliss! If god didn't want them sheared, he wouldn't have made them sheep!

System Name:	m1dg3t \| DeathBox
Processor:	3570k \| q9550 @ 3.77 1.325v BIOS
Motherboard:	Asrock z77e iTX \| p5q Dlx 2301 BIOS
Cooling:	Custom Water \| D-14 & HR-03gt
Memory:	Samsung MV-3V4G3D \| OcZ RpR 2g x 4 @ 1067 2.2v
Video Card:	MSi 7950 tf3 \| Asus 5870 V2 @ 900 / 1275
Hard Disk:	Adata sx900 256Gb / WD2500HHTZ \| WD 1001 FALS x 2
Optical Drive:	As Needed \| LG ch12 BD
CRT/LCD Model:	BenQ gw2750hm \| 46" Sharp Quatron
Case:	BitFenix Prodigy \| Antec Fusion Remote MAX
Sound Card:	Onboard > Yamaha HTR 6290 \| Xonar HDAV1.3 > Yamaha DSP z7
PSU:	Ocz mXp700w \| Ocz zx850w
Software:	Win7 Home \| Xp sp3 & Vista ultimate
Benchmarks:	Epeen!! Who needs epeen??

Jul 10, 2012, 05:41 PM	#5
BrutalGG Join Date: Jul 2012 Location: Middle Of Nowhere Posts: 6 (0.02/day) Thanks: 1 Thanked 0 Times in 0 Posts System Specs	Thanks, I do plan on reapplying TIM and remounting the cooler tonight to see if maybe it was an application error. I knew the chips ran hot but I wasn't able to find an exact threshold number and i thought that a 50C jump was a little extreme. I Do have a little ways to go until i get into liquid Nitrogen. Thanks for all the Help. -Cheers

Jul 10, 2012, 05:43 PM	#6
Elmo Join Date: May 2012 Location: Malaysia Posts: 254 (0.70/day) Thanks: 16 Thanked 35 Times in 31 Posts System Specs	Well the ln2 thing was a joke :s but sure go for it :P __________________ ⎝⏠⏝⏠⎠

Jul 10, 2012, 05:44 PM	#7
BrutalGG Join Date: Jul 2012 Location: Middle Of Nowhere Posts: 6 (0.02/day) Thanks: 1 Thanked 0 Times in 0 Posts System Specs	I figured its hard to translate joking tones into forum posts though

Jul 10, 2012, 05:49 PM	#8
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,672 (2.45/day) Thanks: 4,329 Thanked 2,322 Times in 1,153 Posts System Specs	Your temps look fine to me. If you didn't apply TIM correctly it wouldn't idle 33c. That cooler is great, but is a lot better if you add another 120mm fan for a push/pull. Just using 1x 120mm fan those temps seem fine. I would buy 2x 120mm fans > 80cfm and add a fan control to adjust fan speeds when not gaming. *EDIT: I use 2x Scythe SY1225SL12SH 120mm "Slipstream"* __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

System Name:	Sechs / EyeSeven
Processor:	I7 970 @ 4.0ghz / I7 2600k @ 4.5Ghz
Motherboard:	P6X58D-E / ASRock Z68 Extreme3 Gen3
Cooling:	CM Hyper 212 Plus push-pull / Corsair H50
Memory:	Corsair 30GB DDR3 1600 / G.Skill DDR3 1600 8gb 2x4GB
Video Card:	EVGA 480 / MSI GTX 680 PE 2Gb
Hard Disk:	GSkill 120GB SSD & OCZ RevoDrive 3 X2 240GB / Corsair 60gb SSD, 3x250 WD RAID0 avg 170mb\sec
Optical Drive:	Asus 24x / Ext. Samsung Writemaster 22x
CRT/LCD Model:	2x Samsung SyncMaster 2243 22" / 3x Acer 22" Nvidia surround
Case:	COOLER MASTER HAF 912 / Cooler Master Storm Scout
Sound Card:	On board / SB X-Fi Gamer
PSU:	Corsair tx650w / Corsair tx750w
Software:	Windows 7 Pro x64 / Windows 7 ultimate x64

Jul 12, 2012, 12:49 PM	#10
BrutalGG Join Date: Jul 2012 Location: Middle Of Nowhere Posts: 6 (0.02/day) Thanks: 1 Thanked 0 Times in 0 Posts System Specs	Just Wanted To Give Everyone and update. I re-seated my Hyper212 evo with artic silver 5 rather than my zalman TIM and my max temp has now gone down to 68c-70c. Thanks so much Cheers

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Advice on new computer build? Or keep current build.	joeyck	System Builder's Advice	28	Jul 18, 2010 05:04 PM
New to water cooling, New build info needed	deadlyrhythm	System Builder's Advice	22	Oct 14, 2009 01:42 AM
New build, new troubles, LinPack unstable at stock - I need some help.	Yukikaze	General Hardware	10	Jul 14, 2009 11:41 PM
Question about OC'ing new build, need new PSU?	KIdDynamite	Overclocking & Cooling	0	Feb 22, 2008 08:55 PM
New Builder with New Build, Benchmark Questions on the issue	irishalcoholic	General Hardware	3	Sep 21, 2007 10:52 AM