AMD fx-6100

Fanste · Dec 11, 2012, 04:10 PM

hi, i just put my fx6100 @ 4ghz with stock coling, without increasing voltage , and it is stable ... did anyone try that, or maybe i did something wrong

brandonwh64 · Dec 11, 2012, 04:27 PM

The Fx series OCs pretty good. just make sure your temps are not too high and you remain stable.

AphexDreamer · Dec 11, 2012, 04:31 PM

I have mine at 4.5 Ghz with 1.476 volts. Just for reference.

Fanste · Dec 11, 2012, 04:32 PM

i run stability test for 30min and temp is 45-48c ... with stock coling??

AphexDreamer · Dec 11, 2012, 04:34 PM

Quote:

Originally Posted by Fanste

i run stability test for 30min and temp is 45-48c ... with stock coling??

If you have stock cooling you might not get good yields. Just make sure the CPU temp doesn't exceed 60C.

Fanste · Dec 11, 2012, 04:37 PM

should i turned off turbo core?

brandonwh64 · Dec 11, 2012, 04:49 PM

Test with Intelburntest make sure you have it set to 6 threads and max memory, do atleast 20 passes.

AphexDreamer · Dec 11, 2012, 04:59 PM

Quote:

Originally Posted by Fanste

should i turned off turbo core?

You can and then manually set the speed at which you want the CPU to run. I don't know how much you know but just to be sure CPU speed = Front Side BUS (FSB) x CPU Multiplyer (MP). The higher the cpu speed the more volts you are going to need to keep it stable which means more heat is going to be generated which will in turn also cause stability issues. This is why cooling is important.

Fanste · Dec 11, 2012, 06:16 PM

yes , i know that , but i didn't know that can be stable @4ghz without voltage increasing

Fanste · Dec 11, 2012, 06:24 PM

@ which freq. you put cpuNorthbridge, and ht link freq.?

AphexDreamer · Dec 11, 2012, 06:44 PM

Fanste · Dec 11, 2012, 09:44 PM

thanks man , 4.5ghz is going to be my limit.

RCoon · Dec 11, 2012, 10:23 PM

I hit 4.7 on 1.45v with a H80 on my old 6200

Fanste · Dec 12, 2012, 01:36 PM

your cooling is the same price as CPU, i think with air cooling limit is 4.5 :/

Mathragh · Dec 12, 2012, 02:14 PM

Quite a nice result

I OC-ed my GF's FX-6100, and I couldnt get it stable on stock volts over 3,7GHz, it needed quite a bit more juice for 4,0GHz. It really had a low stock voltage to begin with though(compared to my 8120 atleast).

I'd say that as long as you dont increase the voltage too much, you'll be fine with the stock/air cooler.
Generally these chips dont like a core temperature over 55-60 C, so if you stay under 60C you're OK.

Happy clocking!

RCoon · Dec 12, 2012, 02:49 PM

I find it easier to lower the vcore below stock voltage first, most processors will run stable on less. Once you've found your base ground, overclock from there. You'd be surprised at what you can get on less voltage.

Dec 11, 2012, 04:10 PM	#1
Fanste Join Date: Nov 2012 Location: Montenegro Posts: 42 (0.21/day) Thanks: 58 Thanked 1 Time in 1 Post System Specs	AMD fx-6100 hi, i just put my fx6100 @ 4ghz with stock coling, without increasing voltage , and it is stable ... did anyone try that, or maybe i did something wrong

Dec 11, 2012, 04:27 PM	#2
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,560 (10.03/day) Thanks: 2,138 Thanked 5,338 Times in 3,695 Posts System Specs	The Fx series OCs pretty good. just make sure your temps are not too high and you remain stable. __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

Dec 11, 2012, 04:31 PM	#3
AphexDreamer Eligible for custom title Join Date: Jun 2007 Location: C:\Program Files (x86)\Aphexdreamer\ Posts: 5,614 (2.59/day) Thanks: 812 Thanked 888 Times in 674 Posts System Specs	I have mine at 4.5 Ghz with 1.476 volts. Just for reference. __________________ Sent from my PC using chrome.

System Name:	Unknown
Processor:	AMD Bulldozer FX6100 @ 4.5Ghz
Motherboard:	Asus Crosshair V
Cooling:	ThermalRight Ultra Extreme 120 With two 120mm Fans/Heatsink and three 120 mm fans intake/outake
Memory:	8 GB of Rip Jaws DDR3 RAM 1680Mhz (8-9-8-24) 7.9 Rating
Video Card:	ASUS ROG MATRIX 5870 2GB GDDR5
Hard Disk:	Western Digital Caviar Black 1TB 64MB Cache SATA 6.0Gb/s
Optical Drive:	HP DVD 840 Lightscribe DVD+/-Writer/CD-Writer & CD Drive
CRT/LCD Model:	AOC 23" @ 1920x1080
Case:	HAF X
Sound Card:	X Fi Titanium 5.1 Surround Sound
PSU:	750 Watt PP&C Silencer Black
Software:	Windows 8 Pro 64-bit

Dec 11, 2012, 04:32 PM	#4
Fanste Join Date: Nov 2012 Location: Montenegro Posts: 42 (0.21/day) Thanks: 58 Thanked 1 Time in 1 Post System Specs	i run stability test for 30min and temp is 45-48c ... with stock coling??

Dec 11, 2012, 04:37 PM	#6
Fanste Join Date: Nov 2012 Location: Montenegro Posts: 42 (0.21/day) Thanks: 58 Thanked 1 Time in 1 Post System Specs	should i turned off turbo core?

Dec 11, 2012, 04:49 PM	#7
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,560 (10.03/day) Thanks: 2,138 Thanked 5,338 Times in 3,695 Posts System Specs	Test with Intelburntest make sure you have it set to 6 threads and max memory, do atleast 20 passes. __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

Dec 11, 2012, 06:16 PM	#9
Fanste Join Date: Nov 2012 Location: Montenegro Posts: 42 (0.21/day) Thanks: 58 Thanked 1 Time in 1 Post System Specs	yes , i know that , but i didn't know that can be stable @4ghz without voltage increasing

Dec 11, 2012, 06:24 PM	#10
Fanste Join Date: Nov 2012 Location: Montenegro Posts: 42 (0.21/day) Thanks: 58 Thanked 1 Time in 1 Post System Specs	@ which freq. you put cpuNorthbridge, and ht link freq.?

Dec 11, 2012, 06:44 PM	#11
AphexDreamer Eligible for custom title Join Date: Jun 2007 Location: C:\Program Files (x86)\Aphexdreamer\ Posts: 5,614 (2.59/day) Thanks: 812 Thanked 888 Times in 674 Posts System Specs	__________________ Sent from my PC using chrome.

Dec 11, 2012, 09:44 PM	#12
Fanste Join Date: Nov 2012 Location: Montenegro Posts: 42 (0.21/day) Thanks: 58 Thanked 1 Time in 1 Post System Specs	thanks man , 4.5ghz is going to be my limit.

Dec 11, 2012, 10:23 PM	#13
RCoon Join Date: Apr 2012 Location: Grantham, Lincolnshire, UK Posts: 1,201 (3.03/day) Thanks: 108 Thanked 407 Times in 292 Posts System Specs	I hit 4.7 on 1.45v with a H80 on my old 6200 __________________ "So many times I wanted to move about (make poop but can't leave the game because it's online)" - Underworld

System Name:	White 'Coon - Hudson File Server - Zombie Procyon
Processor:	Delidded i5 3570k 4.4ghz - AMD Phenom x6 1055t - AMD 8350
Motherboard:	MSI z77 GD65 - Asus Evo M4 - Asus Sabertooth 990fx
Cooling:	Corsair H100 2x120mm 2x200mm - CM Hyper 212 Evo Push/Pull - Zalman White Knight
Memory:	Crucial Ballistix 1866 16GB - Corsair XMS 3 1333 16GB - Kingston Beast 1600 8GB
Video Card:	2 x 7950 XFX DD 3GB 1Ghz 1350mhz - 2 x GTX275 XFX (Arctic Cooler) - Gigabyte Windforce GTX 570
Hard Disk:	Corsair Force 3 120gb\|2 x 2TB Seagate Barracuda 6Gbps - OCZ Agility 3 60GB\|WD Blue 500GB - 2 x 500GB
Optical Drive:	Samsung LiteScribe 22x - None
CRT/LCD Model:	BenQ XL2411T 144hz \| BenQ G2420HD 60hz - Shared - Dell 24"
Case:	NZXT Phantom Full - AVP K1 300 - Antec LANBoy Air
Sound Card:	Asus Xonar D2X 7.1 - Onboard - Onboard
PSU:	Corsair HX1050 Gold - OCZ ZS 650w Bronze - OCZ ZS 650w Bronze
Software:	Win 7 Ultimate 64 - Win 7 Ultimate 64 - Win 7 Ultimate 64

Dec 12, 2012, 01:36 PM	#14
Fanste Join Date: Nov 2012 Location: Montenegro Posts: 42 (0.21/day) Thanks: 58 Thanked 1 Time in 1 Post System Specs	your cooling is the same price as CPU, i think with air cooling limit is 4.5 :/

Dec 12, 2012, 02:14 PM	#15
Mathragh Join Date: Dec 2009 Location: The Netherlands Posts: 646 (0.51/day) Thanks: 156 Thanked 198 Times in 147 Posts System Specs	Quite a nice result I OC-ed my GF's FX-6100, and I couldnt get it stable on stock volts over 3,7GHz, it needed quite a bit more juice for 4,0GHz. It really had a low stock voltage to begin with though(compared to my 8120 atleast). I'd say that as long as you dont increase the voltage too much, you'll be fine with the stock/air cooler. Generally these chips dont like a core temperature over 55-60 C, so if you stay under 60C you're OK. Happy clocking!

System Name:	Maffputer \|\| Mafftop
Processor:	AMD FX-8120 \|\| Core i5 460M
Motherboard:	Asus Sabertooth 990FX \|\| NBLB2
Cooling:	Corsair H100i Push-Pull\|\| Stock
Memory:	Samsung 30nm 4x4GB \|\| 2x4GB DDR3
Video Card:	AMD HD7950 + Gelid Icy Vision A \|\| Mobility Radeon 5650
Hard Disk:	Samsung 830 128GB + raid\|\| 320GB 7200 RPM
CRT/LCD Model:	Samsung S23A750D 120Hz + others\|\| 15,4" 1080p
Case:	Corsair 500R Fans Galore \|\| Laptop
Sound Card:	Asus Xonar DX/XD \|\| onboard
PSU:	Corsair AX860i \|\| 90Watt 19V OEM adaptor
Software:	Win 8 Prof 64bit \|\| Win 8 Prof 64bit

Dec 12, 2012, 02:49 PM	#16
RCoon Join Date: Apr 2012 Location: Grantham, Lincolnshire, UK Posts: 1,201 (3.03/day) Thanks: 108 Thanked 407 Times in 292 Posts System Specs	I find it easier to lower the vcore below stock voltage first, most processors will run stable on less. Once you've found your base ground, overclock from there. You'd be surprised at what you can get on less voltage. __________________ "So many times I wanted to move about (make poop but can't leave the game because it's online)" - Underworld

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Machine, AMD FX 6100 and Asus M5A78L-M LX is good ?	StanMen	Overclocking & Cooling	14	Apr 3, 2012 05:10 PM
[FS][US] AMD Athlon 64 X2 3800+ EE w/ Biostar TForce 6100 & heatsink	br4dz	Buy/Sell/Trade/Giveaway Forum	0	Jul 26, 2011 12:28 AM
TYAN Launches Quad Socket G34 Server for AMD Opteron 6100 Series Processors	btarunr	News	12	Feb 17, 2011 06:28 PM
AMD Opteron 6100 Review	King Wookie	General Hardware	0	Apr 1, 2010 10:00 AM
integrated nvidia geforce 6100	kgd	GPU-Z	3	Oct 6, 2007 09:51 AM