![]() |
|
|
#1 |
|
Senior Moderator™
Join Date: May 2007
Posts: 7,062 (3.23/day)
Thanks: 2,170
Thanked 1,838 Times in 1,104 Posts
|
Great White Bengal
i7 930 @ 4Ghz
Gigabyte GA-X58A-UD3R 3 x 2048 DDR3 Mushkin blackline Scythe Yasya The above bundle was very generously gifted to me by mjkmike. Without it, I'd never started this build. Purchased locally: Zotac 670 4GB 240GB Sandisk SSD Sony BWU-500S-WW Blu ray writer NZXT Switch 810 White NZXT HALE90 850W PSU White Windows 7 Home Premium x64 ![]() The tiger decal will go on the solid side of the case. CPU ![]() Motherboard ![]() RAM ![]() CPU Cooler ![]() Building......... ![]() ![]() ![]() ![]() I still have to install the CPU cooler, optical drive and SSD. And hopefully my local seller keeps his promise and delivers the Zotac 670 4GB next week. 16th July Update Put the Optical Drive in place: I like the way the drives are secured by clips, with 2 pins which neatly fit in the holes instead of using screws. In the below photo you can see how it looks before I locked the clip in place. ![]() The front: ![]() After I re-inserted the bezel: ![]() Connected sata cable.. I'll connect the power cable after I install the SSD so as to plan out the wire management: ![]() Finally... I assembled the CPU cooler i.e. put the fan in place, and the push-pins as well. ![]() The next photos would be of the installed SSD and CPU cooler. Hopefully. Unless I entertain y'all with a picture of the cooler slammed and stuck into the wall..... I can feel it those push-pins are going to be giving me a hard time. Just look at the way they are smirking in glee, all loose and unruly at me!The back of the motherboard (inside the case) clearly showing the 4 holes where the push-pins should come through: ![]() 20th July update: I received the graphics card ![]() ![]() ![]() ![]() ![]() Apologies for the quality of the pictures. I'd be at home during midday work break, take the pics, put them on pendrive and crop and upload them in the evening when I'd be in another place. 23rd July update: It's ALIVE!!! ![]() ![]() To hell with getting help to install the cpu cooler As soon as I was at home I couldn't bear to wait any longer. So I found two pieces of furniture the same height, laid down the tower like this: ![]() That way I could check the push-pins were properly aligned by looking beneath (like having a car on a jack). And gravity helped a lot! ![]() Powered up, and no problems so far! I was thinking I'd get a bad seal between the cpu but the bios temps seem ok. Or that I'd mess up the tiny power/hdd led/reset switches... but those were ok as well. All that remains now is to install Win 7. ![]() ![]() ![]() 24th July update Everything is ready, Windows 7 installed, motherboard drivers installed, graphics drivers installed. All that remains is connecting to the net now... Decal on side of case: ![]() ![]() My 27" Dell 2560x1440 is being rma'd.... So now I've got to make do with a huge tower, a graphics card with 4GB Vram.... and a puny little 1680x1050 monitor! ![]() ![]() _____________________________ 30th July update: I'm playing Skyrim, adding more and more texture mods than I ever thought existed, yet on the 1680x1050 monitor the fps won't go lower than the 60 fps cap, at ultra settings. I hope I get the 2560 monitor I rma's on the 20th July soon because this card is overkill right now on a puny 1680x1050 ![]() Photo of powered up pc without flash: ![]() And with flash: ![]() I love the motherboard's inbuilt lights. 10th August Update: With my Dell U2711 back in place ![]() ![]() ![]() ![]() I'll be updating this when I get the NZXT hue next, but the motherboard's lights are already nice enough in the dark. The louvres on the top of the case, when open, show up great on the ceiling. ![]() .../ to be continued... (by editing this OP) Last edited by Black Panther; Aug 10, 2012 at 02:13 PM. |
|
|
|
| The Following 20 Users Say Thank You to Black Panther For This Useful Post: |
|
|
#2 |
![]() Join Date: Nov 2004
Location: Lost in Norway
Posts: 2,581 (0.83/day)
Thanks: 934
Thanked 378 Times in 320 Posts
|
Gonna be a sweet rig.
__________________
Sys. Specs. i7 2600K@4.6|ASUS P67 Sabertooth|2x4096 Corsair Vengence 1600 |Sapphire HD7970 OC|WD Caviar Black 6.0Gbps 1TB x2@RAID 0|SB X-Fi Fatality Pro|TT Toughpower 1.2kW|TT Kandalf L.C.S.|Acer V243H 24" 1920x1080|Logitech G25|Logitech G500|Logitech G19|Saitek X-52 Pro|TrackIR4 w/Trackclip Pro |
|
|
|
| The Following User Says Thank You to INSTG8R For This Useful Post: |
|
|
#3 |
|
Addicted to Bacon and StarCrunches!!!
Join Date: Sep 2009
Location: Chatsworth, GA
Posts: 13,569 (10.00/day)
Thanks: 2,149
Thanked 5,342 Times in 3,697 Posts
|
Hows that motherboard panther? I am getting one next week to replace some AMD machines.
__________________
Cruncher's: All GPU's GPU's:
7970 3GB *Unlocked* = 8 Threads 5770 1GB OCed = 2 Threads |
|
|
|
|
|
#4 |
![]() Join Date: May 2010
Location: Canada
Posts: 1,910 (1.74/day)
Thanks: 631
Thanked 429 Times in 353 Posts
|
Nice work BP! Looks clean clean clean! Decal should look sweet!
![]() Everyone be warry, BP gonna go on a SkyRim rampage with her new box! Arrows to the knee for all! ![]() Mad props to mjkmike for being a standup guy
__________________
Why dazzle 'em with brilliance when you can baffle 'em with bullshit. Alterius non sit, qui potest esse sui! Und setzet ihr nicht das leben ein, Nie wird euch das leben gewonnen sein! If knowledge is power, then ignorance is bliss! If god didn't want them sheared, he wouldn't have made them sheep! |
|
|
|
| The Following 2 Users Say Thank You to m1dg3t For This Useful Post: |
|
|
#5 |
![]() Join Date: Oct 2007
Location: Chicago
Posts: 4,507 (2.20/day)
Thanks: 1,527
Thanked 1,579 Times in 1,122 Posts
|
Nice...though curious why you chose X58 at this point in time? Good prices?
__________________
“i dont care what consoles have they dont have mouse and keyboard” -crazyeyesreaper
![]() |
|
|
|
|
|
#6 |
![]() Join Date: Sep 2010
Location: Tilburg, Netherlands
Posts: 2,059 (2.07/day)
Thanks: 4,976
Thanked 787 Times in 533 Posts
|
Someone gifted the mobo, cpu etc. So it was an obvious yeah.
__________________
My FS/FT thread (EU only) | DynMap of the TPU Minecraft server | Quick monitor calibration guide | Boot Failure Troubleshooting Chart | Solar Team Eindhoven Family Car Project Using BOINC I crunch numbers for World Community Grid, Climateprediction, Free Rainbow Tables and POEM@home; hence assisting research. |
|
|
|
| The Following User Says Thank You to Chevalr1c For This Useful Post: |
|
|
#7 |
![]() Join Date: Jan 2010
Location: USA
Posts: 3,445 (2.84/day)
Thanks: 1,520
Thanked 1,210 Times in 1,156 Posts
|
sub'd
__________________
|| Heatware || Build: A Wooden Beast || Build: The Wooden Beast's Desk || Case Mod: Tribal Strikes Again || || Intel I7 920 @ 4.3 // ASUS Rampage III Extreme// ASUS 580 // 3x2GB Mushkin// CM Silent Pro 1200 // Water Cooled || || My Ever Changing For Sale Thread |
|
|
|
|
|
#8 |
|
WCG Team Assistant
Join Date: Dec 2011
Location: Northeast, USA
Posts: 5,185 (9.94/day)
Thanks: 5,429
Thanked 10,178 Times in 3,199 Posts
|
Looks great so far!!!
![]() But that case is screaming for water cooling... at least an H100
__________________
Why sit on the Bench when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's WCG-TPU Team thread- crunch for our Team/see what we do... |
|
|
|
| The Following User Says Thank You to Norton For This Useful Post: |
|
|
#9 |
![]() Join Date: May 2008
Location: Brasil
Posts: 2,608 (1.42/day)
Thanks: 295
Thanked 268 Times in 204 Posts
|
|
|
|
|
|
|
#10 |
![]() Join Date: Feb 2010
Location: Alberta,Canada
Posts: 1,481 (1.24/day)
Thanks: 2,691
Thanked 3,749 Times in 981 Posts
|
looking good.
![]() Hope the Zotac 670 4GB gets there soon.
__________________
Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex |
|
|
|
| The Following 2 Users Say Thank You to mjkmike For This Useful Post: |
|
|
#11 |
|
Eligible for custom title
Join Date: Jan 2009
Location: ENGLAND-LAND-LAND
Posts: 8,443 (5.27/day)
Thanks: 1,188
Thanked 1,705 Times in 1,375 Posts
|
You got given that case !?
I'm jealous, looks great to work in fans everywhere as well!
|
|
|
|
|
|
#12 | |
|
Senior Moderator™
Join Date: May 2007
Posts: 7,062 (3.23/day)
Thanks: 2,170
Thanked 1,838 Times in 1,104 Posts
|
Quote:
)But yes it's great to work in! There's no need to physically warp unremovable drive cages now to get a large graphics card to fit!
|
|
|
|
|
| The Following 2 Users Say Thank You to Black Panther For This Useful Post: |
|
|
#13 | |
|
Eligible for custom title
Join Date: Jan 2009
Location: ENGLAND-LAND-LAND
Posts: 8,443 (5.27/day)
Thanks: 1,188
Thanked 1,705 Times in 1,375 Posts
|
Quote:
Still that's pretty crazy, TPU is one amazing community.We all know that secretly you liked having to cut up your case BP! It made the card feel that much more powerful
|
|
|
|
|
| The Following 2 Users Say Thank You to pantherx12 For This Useful Post: |
|
|
#14 |
|
Senior Moderator™
Join Date: May 2007
Posts: 7,062 (3.23/day)
Thanks: 2,170
Thanked 1,838 Times in 1,104 Posts
|
OP updated with more developments.
I'm unsure whether to try my luck with the push-pins of the cpu cooler, or whether to get another cooler altogether... I should have the graphics card this Wednesday or Thursday, seller confirmed he got the notice of arrival ._________________________ Do you think I should install the SSD the closest possible to the Optical Drive for best wire management? The SSD shouldn't be needing a fan, they don't get that hot. Last edited by Black Panther; Jul 16, 2012 at 05:07 PM. |
|
|
|
|
|
#15 |
|
Eligible for custom title
Join Date: Jan 2009
Location: ENGLAND-LAND-LAND
Posts: 8,443 (5.27/day)
Thanks: 1,188
Thanked 1,705 Times in 1,375 Posts
|
I stick SSDs behind the motherboard tray or just stick them on the bottom of the case.
|
|
|
|
|
|
#16 | |
|
Senior Moderator™
Join Date: May 2007
Posts: 7,062 (3.23/day)
Thanks: 2,170
Thanked 1,838 Times in 1,104 Posts
|
Quote:
![]() _________________________________ I want to add some LEDs to the interior. Never done LED strips before... Which colors would you suggest? (White)? I've never bought LED strips before. What type of connection do they have? |
|
|
|
|
|
|
#17 |
|
Better Than You
Join Date: Sep 2006
Location: Toledo,Ohio
Posts: 5,449 (2.24/day)
Thanks: 730
Thanked 1,572 Times in 994 Posts
|
Is that a Sandisk Ultra or Extreme? Also for lighting get the NZXT Hue. It uses double sided 3m adhesive so you dont have to mess with clips.
Last edited by AthlonX2; Jul 16, 2012 at 08:41 PM. |
|
|
|
| The Following 2 Users Say Thank You to AthlonX2 For This Useful Post: |
|
|
#18 |
|
Senior Moderator™
Join Date: May 2007
Posts: 7,062 (3.23/day)
Thanks: 2,170
Thanked 1,838 Times in 1,104 Posts
|
To be honest I didn't know there were 2 versions
. Mine's the extreme.Thanks for the LED comparisons there in the white case. I really think I'd go for white leds
|
|
|
|
|
|
#19 |
![]() Join Date: Nov 2011
Location: Hi! I'm from the Internet
Posts: 3,754 (6.92/day)
Thanks: 2,547
Thanked 2,451 Times in 1,475 Posts
|
Great looking rig Bp.
I also love the decal ideal. I did the same with my wife's rig. I detailed it in green (case and all) with a dolphin vinyl decal on the case window.
__________________
Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere
“TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo
|
|
|
|
| The Following User Says Thank You to ThE_MaD_ShOt For This Useful Post: |
|
|
#20 |
![]() Join Date: Jun 2010
Location: Wild Wild East
Posts: 4,585 (4.26/day)
Thanks: 2,337
Thanked 1,342 Times in 919 Posts
|
The case looks just as majestic and awesomeworthy as a real white bengal tiger!
|
|
|
|
| The Following User Says Thank You to de.das.dude For This Useful Post: |
|
|
#21 | |
![]() Join Date: Jun 2010
Location: Wild Wild East
Posts: 4,585 (4.26/day)
Thanks: 2,337
Thanked 1,342 Times in 919 Posts
|
Quote:
its got red green and blue leds with the ability to control each of their brightness, so you can use RGB codes to get any color you want
|
|
|
|
|
| The Following User Says Thank You to de.das.dude For This Useful Post: |
|
|
#22 | |
|
Senior Moderator™
Join Date: May 2007
Posts: 7,062 (3.23/day)
Thanks: 2,170
Thanked 1,838 Times in 1,104 Posts
|
Quote:
![]() Thanks! I didn't know about that!
|
|
|
|
|
|
|
#23 |
![]() Join Date: Jun 2010
Location: Wild Wild East
Posts: 4,585 (4.26/day)
Thanks: 2,337
Thanked 1,342 Times in 919 Posts
|
yes there are three dials!
|
|
|
|
|
|
#24 |
|
Addicted to Bacon and StarCrunches!!!
Join Date: Sep 2009
Location: Chatsworth, GA
Posts: 13,569 (10.00/day)
Thanks: 2,149
Thanked 5,342 Times in 3,697 Posts
|
BP you never answered my question
![]()
__________________
Cruncher's: All GPU's GPU's:
7970 3GB *Unlocked* = 8 Threads 5770 1GB OCed = 2 Threads |
|
|
|
|
|
#25 | ||
|
Senior Moderator™
Join Date: May 2007
Posts: 7,062 (3.23/day)
Thanks: 2,170
Thanked 1,838 Times in 1,104 Posts
|
Quote:
Heck I don't know if it even works or not, perhaps I shorted something out or ruined it with static but that's highly unlikely because I'm very careful and nothing like that ever happened to me.. I forgot my Arctic Silver 5 at the other place, and am not in the mood to buy another tube knowing that the one I have there is nearly new so I can't attach the cpu cooler for now. For me, well it looks like a great motherboard because although it's socket 1366 it's still a big upgrade from my old Asus P5B. Here's some screenshots mkjmike had sent me - note it's with the CPU at 100% usage while crunching. I'm sure he won't mind me sharing them: Quote:
![]() ![]() ![]() . |
||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [FS] Xazax's FS Thread, GREAT PARTS GREAT PRICES! | Xazax | Buy/Sell/Trade/Giveaway Forum | 23 | Jun 6, 2008 02:05 AM |
| [Case Gallery] Black & White | KennyT772 | Case Mod Gallery | 10 | Jul 11, 2006 01:31 AM |