Swimming in the Ocean!! - Page 2

MxPhenom 216 · Jan 21, 2013, 06:38 PM

Quote:

Originally Posted by ALMOSTunseen

"We've tapped G1/4 threading" Only from the retailer's that are kind enough to do it for you.

Im aware of that, but if the OP doesn't have the tools to do this, then he can just find one of these over there.

ALMOSTunseen · Jan 21, 2013, 06:40 PM

Quote:

Originally Posted by MxPhenom 216

Im aware of that, but if the OP doesn't have the tools to do this, then he can just find one of these over there.

Fair point, but shipping wouldn't be worth it.

MxPhenom 216 · Jan 21, 2013, 06:43 PM

Quote:

Originally Posted by ALMOSTunseen

Shipping wouldn't be worth it.

Im saying, find one of these pre-threaded D5 pumps on the site he is using. Not ordering from performance-pcs.

Cotton_Cup · Jan 22, 2013, 03:33 AM

hey guys, I'm on a break now from work. hehehe.

btw I was watching this late last night (lost a lot of sleep ahahahaha) wew learning water cooling seems harder than learning how to build from scratch.

How to Select Tube and Fittings Complete PC Waterc...

this tubing I posted last nigh.

cost me 150php = 3.75$ per ft I can only buy a minimum of 10 ft. is it worth it? is it enough for my needs?

how about this tubing? doesn't look nice thought.
Durelence St Gobain 1/4 3/8 Clear Tubing 6ft
(Durelence St Gobain 1/4 3/8 Clear Tubing 6ft (free label) = 600.00Php)

how is the quality of this tube when bending it?

for the compression since i'm going with the 1/4 3/8 tube
http://www.tipidpc.com/viewitem.php?iid=21974952

did I have it right?

http://www.tipidpc.com/viewitem.php?iid=21974981
do I need this too?

how about this tubing? in that link there are multiple tubes, I liked the blue color although it's more expensive.
http://www.tipidpc.com/viewitem.php?iid=20077032

since the 1/2 ID and 3/4 OD so does that mean it doesn't fit on the G1/4" 3/8" 5/8"??? the compression fitting above?

note: sorry for having too many questions. please bear with a newbie

so If I were to go with the blue tubing 1/2 ID 3/4 OD then I would need to go with this compression fitting?
http://www.tipidpc.com/viewitem.php?iid=21972783

Since my motherboard MSi X79A-GD65 8D has a blue LED i was thinking of going blue (sadly I use the red G.SKILL planning on getting a G.SKILL Fan on it and paint it blue XD or get small blue led fans.

btw just for confirmation. this one fits right?

Res = XSPC Acrylic Dual 5.25 Bay Reservoir (Alu Front) = 3300
Pump = Swiftech MCP655-B Water Cooling Pump= 5000

right?

based here
http://www.petrastechshop.com/lad5smcin12v.html

it should fit but also means Ii need the 1/2" barb (can i use the compression fitting 1/2??

using this tube: A pre-cut TFC Feser UV Blue Tubing
note: Does this tubing fit this res? http://www.tipidpc.com/viewitem.php?iid=21969179

using this compression: Thermochill Chrome Compression Fittings 1/2id to 3/4od
did I get it right?

edit: was watching this linus vid about water cooling and he removed the slot for the cpu block and put it in the other side so the fittings would fit. does my selected cpu block would fit the compression fittings I put above?

http://www.tipidpc.com/viewitem.php?iid=21955246
EK-Supremacy - Full Nickel

here is the vid ^_^
Ultimate Water Cooling Guide Part 3 - Tubing, Liqu...

what about this cpu block??
http://www.tipidpc.com/viewitem.php?iid=21011904
lga 2011 compatible.
Supplied with mounting hardware, 775, 1156/1155, and 1366 backplates, twin blue LED, allen key, and K2 thermal paste. (does this mean I need to buy my own lga2011 mounting hardware? or I can just buy seperate mounting stuff for the lga2011?)

gonna update my list at the first post for now.

edit: this xspc raystorm looks nice, I wonder if I don't need a backplate for it like on some air cooler on lga2011 can anyone clarify this?

i found this about the raystorm and looks like a good read.
http://forums.overclockers.co.uk/sho...php?p=20155925

but in here on their link it says it's compatible with lga 2011 but doesn't have a back plate. or are the lga 1366 and lga 2011 have the same back plate? hope it fits my motherboard if so.

drdeathx · Jan 22, 2013, 06:27 AM

dude, just get this and call it a day:

XSPC Raystorm waterblock
MCP655 pump
XSPC Acrylic Dual 5.25 Bay Reservoir (Alu Front) = 3,300
Primochill Primoflex LRT Pro 3/8 x 5/8 (black)
MCRx20-XP "eXtreme Performance" Radiator Series
2 x 1/2 inch barbs for rad
4 x Swiftech 1/2 x 3/4 Lok-Seal Compression Fitting - Chrome
EK-FC 7970 GPU waterblock

you can get a fillport too to make it easy to fill the system
Swiftech Water Cooling Fillport w/ 1/2" High Flow Barb Fitting - Mounts Into A 5/8IN Hole

For your water used 100% distilled water/PT Nuke and silvercoil

Your post is getting quite lengthy and most are losing interest

Cotton_Cup · Jan 22, 2013, 06:51 AM

oh ok lol, was using edit instead of making another post.

edit: removed some unnecessary words on my previous post.

MxPhenom 216 · Jan 22, 2013, 07:13 AM

Quote:

Originally Posted by Cotton_Cup

oh ok lol, was using edit instead of making another post.

can close thread already.

Your posts are just walls of text. You don't need to copy and paste the page content. You can just give us links to everything. But I dont know why your going to 3/8" tubing?

Cotton_Cup · Jan 22, 2013, 07:19 AM

I don't know either that's why I'm asking >.< but I'll just buy those stuff, so far when I asked help here before was never let down. so I'll just buy them and ask again if something is troubling me.

MxPhenom 216 · Jan 22, 2013, 07:20 AM

3/8 is small and doesnt look very good IMO, and I think its a little harder for water to flow through. 7/16 and 1/2" ID tubing is the chosen size by nearly everyone.

Cotton_Cup · Jan 22, 2013, 07:32 AM

ok how about this?

Radiator = XSPC EX360 Triple Fan Radiator (black)
http://www.xs-pc.com/products/radiat...-fan-radiator/
CPU Block = XSPC Raystorm compatible with LGA2011
http://www.xs-pc.com/products/waterb...erblock-intel/
Pump = Swiftech MCP655-B Water Cooling Pump
http://www.swiftech.com/MCP655-B.aspx
Reservoir = XSPC Acrylic Dual 5.25 Bay Reservoir (Alu Front)
http://www.xs-pc.com/products/reserv...oir-alu-front/
Tube = TFC Feser UV Blue Tubing 1/2 ID 3/4OD
http://www.tipidpc.com/viewitem.php?iid=20077032 (the blue one)
Compression Fittings 1/2 ID to 3/4 OD G1/4" = 280 (x8 pece)
http://www.xtremesystems.org/forums/...itting-Preview

should be good to go? got a 7970 gpu block and back plate already, currently messing with it right now. oh the kill coil too.

ALMOSTunseen · Jan 22, 2013, 07:34 AM

Quote:

Originally Posted by Cotton_Cup

ok how about this?

Radiator = XSPC EX360 Triple Fan Radiator (black)
http://www.xs-pc.com/products/radiat...-fan-radiator/
CPU Block = XSPC Raystorm compatible with LGA2011
http://www.xs-pc.com/products/waterb...erblock-intel/
Pump = Swiftech MCP655-B Water Cooling Pump
http://www.swiftech.com/MCP655-B.aspx
Reservoir = XSPC Acrylic Dual 5.25 Bay Reservoir (Alu Front)
http://www.xs-pc.com/products/reserv...oir-alu-front/
Tube = TFC Feser UV Blue Tubing 1/2 ID 3/4OD
http://www.tipidpc.com/viewitem.php?iid=20077032 (the blue one)
Compression Fittings 1/2 ID to 3/4 OD G1/4" = 280 (x8 pece)
http://www.xtremesystems.org/forums/...itting-Preview

should be good to go? got a 7970 gpu block and back plate already, currently messing with it right now. oh the nuke and kill coil do I need both when I'm using distilled water?

Looks all compatible. I got no idea about the distilled water.

Cotton_Cup · Jan 22, 2013, 07:41 AM

ok I guess since all looks compatible, now I just have to check the water I have in mind if it's 100% absolute water, the wilkins.

drdeathx · Jan 22, 2013, 03:07 PM

Quote:

Originally Posted by MxPhenom 216

3/8 is small and doesnt look very good IMO, and I think its a little harder for water to flow through. 7/16 and 1/2" ID tubing is the chosen size by nearly everyone.

It was late last nite. MX has it on the head. 7/16 ID is the call for a tight fit.

brandonwh64 · Jan 22, 2013, 03:09 PM

I have used 3/8 and 1/2 ID and did not see a difference in temps but this maybe different in your case.

System Name:	My System
Processor:	Intel Core i5 2500k @ 4.5GHZ 1.36v
Motherboard:	AsRock Extreme4 Gen3 P67
Cooling:	EK Supremacy w/ Black Ice X-Flow 240
Memory:	Corsair Dominator Platinums 8GB 4GBx2 2133mhz 1.5v
Video Card:	EVGA Geforce GTX780 3GB
Hard Disk:	Samsung 830 128GB SSD, Corsair Neutron 240GB, Samsung F3 500GB
Optical Drive:	Asus 24x SATA DVD
CRT/LCD Model:	Dell U2412M IPS 24" 1920 x 1200
Case:	Corsair Carbide Series 500r w/ 2x Corsair AF120 fans
Sound Card:	HT Omega Striker 7.1
PSU:	Corsair HX850 Gen1 Silver
Software:	Windows 7 Ultimate 64-bit SP1

System Name:	The White Breeze\|\|Mr.Crunchy(HTPC/Cruncher)\|\|Medion Akoya Ultrabook
Processor:	i7-3770k\|\|i7-2600K\|\|Core i5-3317U
Motherboard:	MSI Z77 MPOWER\|\|Gigabyte GA-Z68XP-UD3\|\|Laptop?
Cooling:	Corsair H100\|\|Cooler Master V8\|\|Laptop?
Memory:	16GB Kingston HyperX @ 2133MHz\|\|8GB Corsair Vengeance\|\|8GB SDRAM
Video Card:	MSI GeForce GTX 680 Lightning\|\|MSI GTX 570 Twin Frozr III Power Edition\|\|Intel 4000
Hard Disk:	Corsair GT 120GB, WD Caviar Black 1TB\|\|OCZ 60gb SSD, WD Caviar Blue 1TB\|\|500GB HDD with 32 MSATA
Optical Drive:	LG 24x\|\|Liteon\|\|DVD drive interchangeable with 3 cell battery
CRT/LCD Model:	Medion 23" LED\|\|14" LED
Case:	NZXT Switch 810\|\|Antec 100\|\|Laptop shell?
Sound Card:	Gamecom USB 7.1 virtual surround Sound\|\|Dolby Home Theatre V4
PSU:	Seasonic XP-860 Platinum\|\|Antec High Current Pro 750w\|\|Laptop Power Brick
Software:	Windows 7\|\|Windows 7\|\|Windows 8

System Name:	My System
Processor:	Intel Core i5 2500k @ 4.5GHZ 1.36v
Motherboard:	AsRock Extreme4 Gen3 P67
Cooling:	EK Supremacy w/ Black Ice X-Flow 240
Memory:	Corsair Dominator Platinums 8GB 4GBx2 2133mhz 1.5v
Video Card:	EVGA Geforce GTX780 3GB
Hard Disk:	Samsung 830 128GB SSD, Corsair Neutron 240GB, Samsung F3 500GB
Optical Drive:	Asus 24x SATA DVD
CRT/LCD Model:	Dell U2412M IPS 24" 1920 x 1200
Case:	Corsair Carbide Series 500r w/ 2x Corsair AF120 fans
Sound Card:	HT Omega Striker 7.1
PSU:	Corsair HX850 Gen1 Silver
Software:	Windows 7 Ultimate 64-bit SP1

Jan 22, 2013, 03:33 AM	#29
Cotton_Cup Join Date: Mar 2012 Location: Rizal, Philippines Posts: 329 (0.76/day) Thanks: 75 Thanked 34 Times in 28 Posts System Specs	hey guys, I'm on a break now from work. hehehe. btw I was watching this late last night (lost a lot of sleep ahahahaha) wew learning water cooling seems harder than learning how to build from scratch. How to Select Tube and Fittings Complete PC Waterc... this tubing I posted last nigh. cost me 150php = 3.75$ per ft I can only buy a minimum of 10 ft. is it worth it? is it enough for my needs? how about this tubing? doesn't look nice thought. Durelence St Gobain 1/4 3/8 Clear Tubing 6ft (Durelence St Gobain 1/4 3/8 Clear Tubing 6ft (free label) = 600.00Php) how is the quality of this tube when bending it? for the compression since i'm going with the 1/4 3/8 tube http://www.tipidpc.com/viewitem.php?iid=21974952 did I have it right? http://www.tipidpc.com/viewitem.php?iid=21974981 do I need this too? how about this tubing? in that link there are multiple tubes, I liked the blue color although it's more expensive. http://www.tipidpc.com/viewitem.php?iid=20077032 since the 1/2 ID and 3/4 OD so does that mean it doesn't fit on the G1/4" 3/8" 5/8"??? the compression fitting above? note: sorry for having too many questions. please bear with a newbie so If I were to go with the blue tubing 1/2 ID 3/4 OD then I would need to go with this compression fitting? http://www.tipidpc.com/viewitem.php?iid=21972783 Since my motherboard MSi X79A-GD65 8D has a blue LED i was thinking of going blue (sadly I use the red G.SKILL planning on getting a G.SKILL Fan on it and paint it blue XD or get small blue led fans. btw just for confirmation. this one fits right? Res = XSPC Acrylic Dual 5.25 Bay Reservoir (Alu Front) = 3300 Pump = Swiftech MCP655-B Water Cooling Pump= 5000 right? based here http://www.petrastechshop.com/lad5smcin12v.html it should fit but also means Ii need the 1/2" barb (can i use the compression fitting 1/2?? using this tube: A pre-cut TFC Feser UV Blue Tubing note: Does this tubing fit this res? http://www.tipidpc.com/viewitem.php?iid=21969179 using this compression: Thermochill Chrome Compression Fittings 1/2id to 3/4od did I get it right? edit: was watching this linus vid about water cooling and he removed the slot for the cpu block and put it in the other side so the fittings would fit. does my selected cpu block would fit the compression fittings I put above? http://www.tipidpc.com/viewitem.php?iid=21955246 EK-Supremacy - Full Nickel here is the vid ^_^ Ultimate Water Cooling Guide Part 3 - Tubing, Liqu... what about this cpu block?? http://www.tipidpc.com/viewitem.php?iid=21011904 lga 2011 compatible. Supplied with mounting hardware, 775, 1156/1155, and 1366 backplates, twin blue LED, allen key, and K2 thermal paste. (does this mean I need to buy my own lga2011 mounting hardware? or I can just buy seperate mounting stuff for the lga2011?) gonna update my list at the first post for now. edit: this xspc raystorm looks nice, I wonder if I don't need a backplate for it like on some air cooler on lga2011 can anyone clarify this? i found this about the raystorm and looks like a good read. http://forums.overclockers.co.uk/sho...php?p=20155925 but in here on their link it says it's compatible with lga 2011 but doesn't have a back plate. or are the lga 1366 and lga 2011 have the same back plate? hope it fits my motherboard if so. __________________ Building PC and knowing about their components is FUN. Last edited by Cotton_Cup; Jan 22, 2013 at 07:22 AM.

System Name:	Cotton Chair
Processor:	Intel i7 3960X 4.9Ghz Sandy Bridge E
Motherboard:	MSi X79A-GD65 8D
Cooling:	XSPC 360 and 240 mm rad
Memory:	64gb G.SKILL 8X8GB
Video Card:	Sappphire 7970 OC Edition Xfire
Hard Disk:	Intel 520 240GB SSD x2 /x2 WD Caviar Black 1TB 7200RPM 64MB Cache
Optical Drive:	Samsung Blu-ray
CRT/LCD Model:	Samsung 23" LED LCD Monitor 1920x1080 x3
Case:	Silverstone TJ 11
Sound Card:	Asus Xonar Phoebus
PSU:	Seasonic X-1250 1250W 80PLUS Gold
Software:	Windows 7 Ultimate (FPP)

Jan 22, 2013, 06:27 AM	#30
drdeathx Join Date: May 2009 Location: Chicago burbs Posts: 1,517 (1.03/day) Thanks: 39 Thanked 336 Times in 276 Posts System Specs	dude, just get this and call it a day: XSPC Raystorm waterblock MCP655 pump XSPC Acrylic Dual 5.25 Bay Reservoir (Alu Front) = 3,300 Primochill Primoflex LRT Pro 3/8 x 5/8 (black) MCRx20-XP "eXtreme Performance" Radiator Series 2 x 1/2 inch barbs for rad 4 x Swiftech 1/2 x 3/4 Lok-Seal Compression Fitting - Chrome EK-FC 7970 GPU waterblock you can get a fillport too to make it easy to fill the system Swiftech Water Cooling Fillport w/ 1/2" High Flow Barb Fitting - Mounts Into A 5/8IN Hole For your water used 100% distilled water/PT Nuke and silvercoil Your post is getting quite lengthy and most are losing interest Last edited by drdeathx; Jan 22, 2013 at 06:37 AM.

System Name:	Halloween Boo!
Processor:	Intel Core i7 3770K
Motherboard:	Gigabyte Z77-Up7
Cooling:	Custom Water/ Thermalchill TA 120.3/ Swiftech Apogeee XT/ MCP655/ Swiftech M icrores/ XSPC RX 240
Memory:	16G G.Skill trident 2400MHz
Video Card:	3 x Radeon 7970
Hard Disk:	OCZ Revo Drive 240G
Optical Drive:	Asus
CRT/LCD Model:	24 inch Viewsonic
Case:	Phobia WayCoolIt Test Bench
PSU:	Nexus 1100 watt

Jan 22, 2013, 06:51 AM	#31
Cotton_Cup Join Date: Mar 2012 Location: Rizal, Philippines Posts: 329 (0.76/day) Thanks: 75 Thanked 34 Times in 28 Posts System Specs	oh ok lol, was using edit instead of making another post. edit: removed some unnecessary words on my previous post. __________________ Building PC and knowing about their components is FUN. Last edited by Cotton_Cup; Jan 22, 2013 at 07:23 AM.

Jan 22, 2013, 07:19 AM	#33
Cotton_Cup Join Date: Mar 2012 Location: Rizal, Philippines Posts: 329 (0.76/day) Thanks: 75 Thanked 34 Times in 28 Posts System Specs	I don't know either that's why I'm asking >.< but I'll just buy those stuff, so far when I asked help here before was never let down. so I'll just buy them and ask again if something is troubling me. __________________ Building PC and knowing about their components is FUN.

Jan 22, 2013, 07:20 AM	#34
MxPhenom 216 Knowledgeable Posting Whore Join Date: Aug 2010 Location: Seattle, WA Posts: 5,812 (5.82/day) Thanks: 1,289 Thanked 1,091 Times in 843 Posts System Specs	3/8 is small and doesnt look very good IMO, and I think its a little harder for water to flow through. 7/16 and 1/2" ID tubing is the chosen size by nearly everyone. __________________ Motocross is not just a sport, it's a lifestyle. File Server: Intel Pentium G630, 8GB PNY 1600, AsRock H77M Micro, Corsair CX430M, Vertex 2 90GB (OS), 2x WD Red 2TB in RAID1 “We will never know our full potential, unless we push ourselves to find it. -Travis Rice”

Jan 22, 2013, 07:32 AM	#35
Cotton_Cup Join Date: Mar 2012 Location: Rizal, Philippines Posts: 329 (0.76/day) Thanks: 75 Thanked 34 Times in 28 Posts System Specs	ok how about this? Radiator = XSPC EX360 Triple Fan Radiator (black) http://www.xs-pc.com/products/radiat...-fan-radiator/ CPU Block = XSPC Raystorm compatible with LGA2011 http://www.xs-pc.com/products/waterb...erblock-intel/ Pump = Swiftech MCP655-B Water Cooling Pump http://www.swiftech.com/MCP655-B.aspx Reservoir = XSPC Acrylic Dual 5.25 Bay Reservoir (Alu Front) http://www.xs-pc.com/products/reserv...oir-alu-front/ Tube = TFC Feser UV Blue Tubing 1/2 ID 3/4OD http://www.tipidpc.com/viewitem.php?iid=20077032 (the blue one) Compression Fittings 1/2 ID to 3/4 OD G1/4" = 280 (x8 pece) http://www.xtremesystems.org/forums/...itting-Preview should be good to go? got a 7970 gpu block and back plate already, currently messing with it right now. oh the kill coil too. __________________ Building PC and knowing about their components is FUN.

Jan 22, 2013, 07:41 AM	#37
Cotton_Cup Join Date: Mar 2012 Location: Rizal, Philippines Posts: 329 (0.76/day) Thanks: 75 Thanked 34 Times in 28 Posts System Specs	ok I guess since all looks compatible, now I just have to check the water I have in mind if it's 100% absolute water, the wilkins. __________________ Building PC and knowing about their components is FUN.

Jan 22, 2013, 03:09 PM	#39
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,572 (10.00/day) Thanks: 2,149 Thanked 5,342 Times in 3,697 Posts System Specs	I have used 3/8 and 1/2 ID and did not see a difference in temps but this maybe different in your case. __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Deepest part of the ocean reached....again and finally	HossHuge	Science & Technology	6	Mar 27, 2012 02:21 PM
Giant plumes of methane bubbling to surface of Arctic Ocean	entropy13	Science & Technology	12	Dec 17, 2011 08:31 AM
Google Maps Tells its users to 'Swim across the Atlantic Ocean'	zekrahminator	News	22	Apr 17, 2007 11:54 PM