Phenoms Xbox 360 Rebuild Project Log

MxPhenom 216 · Sep 29, 2012, 03:51 AM

Welcome to Phenoms Xbox 360 Rebuild Project Log

As a lot of you guys may know, I made a thread will a poll a few days ago regarding if I should build an xbox with parts of have, and buy the parts I don't have. If you haven't seen the thread. Go HERE . I got more people either saying "No" or "Depends on how much you spend" but regardless of what they have said Im going to do it for fun. Ill try to limit the costs as much as possible, but I do plan to lose a bit of money, but I can risk that at this point. Doing this for fun, and thats the only benefit im expecting out of it.

So I mentioned I have parts to be able to use. So far the list of parts of have are....
-Hitachi DVD Drive(I want to replace it with a Phillips so it won't put rings in game disks)
-Heatsinks (most likely going to ditch them and get the better ones in the 2nd gen Zephyr revision Xbox and Falcon/Jasper xbox's)
-Screws (but I need more)
-X-clamps for the heatsinks
-Fans(Going to ditch them as they are the old ones with the 4 pin pwoer rather then the 3 pin connector you would typically see in a PC today.)
-White Faceplate
-Top Panel
-DVD drive eject button and front plate - Chrome and says Xbox 360
-Metal internal casing (It is a non hdmi version so unless i hack it up, ill get a new case)

Parts I need to get:
-Motherboard (Jasper Revision with Hitachi Drive PCB)
-Screws
-White plastic housing/casing
-Metal internal casing for HDMI motherboards
-Cooling fans with the 3 pin connector
-Memory heat pads for the back side chips of the motherboard
-Hard Drive(tentative)
-Power Brick(175w)

So when I was thinking about doing this, I wasn't planning on getting so much more parts, but once I started going through everything I had, I realized I needed more then I thought.

Parts I have bought so far:

1. Xbox console from Ebay for parts (Cooling, casing, ring of light, memory heat pads, screws)

The Xbox

Once I get what i need out of this system, ill proceed on with everything else I need.

At this time, I have nothing else for you guys. Stay tuned for next week when the xbox comes. Lots of pictures of my tear down will show up.

This should be fun. Again, don't say its not worth it when it comes to funds, Im aware.

manofthem · Sep 29, 2012, 04:13 AM

Sub'd and looking forward to what's to come!

Doc41 · Sep 30, 2012, 01:12 PM

Sub'd, i love work logs and fun projects, if you feel like doing something, do it ; that's what i do

MxPhenom 216 · Sep 30, 2012, 04:49 PM

Quote:

Originally Posted by Doc41

Sub'd, i love work logs and fun projects, if you feel like doing something, do it ; that's what i do

yeah, it just came down to cost, but ive got a massive disposable income so.

MxPhenom 216 · Oct 2, 2012, 05:29 PM

So I got my first part.............or i should say tool that I needed to be able to screw in all the torx screws the xbox uses. Its the perfect little tool, exactly what I needed.

Torx Screw Driver Set

erocker · Oct 2, 2012, 05:40 PM

No pics?

brandonwh64 · Oct 2, 2012, 05:40 PM

Quote:

Originally Posted by erocker

No pics?

x1000

We want to see the thing painted and pimped out.

MxPhenom 216 · Oct 2, 2012, 05:50 PM

Im waiting on the pictures till the xbox console i bought comes. Theres going to be a ton of tear down pictures.

I was actually thinking about painting the internal casing black. and then the external plastic a more WHITE, and then the top grey panels black.

t_ski · Oct 2, 2012, 06:52 PM

At least you can post a picture of your tool. Wait, that didn't come out right...

MxPhenom 216 · Oct 2, 2012, 11:15 PM

Ill post some pictures later of what I currently have in terms of parts.

TacoTown · Oct 2, 2012, 11:18 PM

It's been a while since I've broken apart a 360 but from what I remember I needed a lot more than just a plain old Torx screw driver. I may be wrong though.

EDIT: apparently so http://www.llamma.com/xbox360/repair...isassembly.htm

MxPhenom 216 · Oct 2, 2012, 11:22 PM

Quote:

Originally Posted by TacoTown

It's been a while since I've broken apart a 360 but from what I remember I needed a lot more than just a plain old Torx screw driver. I may be wrong though.

EDIT: apparently so http://www.llamma.com/xbox360/repair...isassembly.htm

ive taken apart like 5 other xbox's haha. I have everything to take them apart but the screw driver stuff.

MxPhenom 216 · Oct 9, 2012, 08:11 AM

So this project is on stand by as ive decided to put a water cooling loop in my rig for my GTX680, so ill make a project log for that.

freaksavior · Oct 9, 2012, 08:53 AM

Subbed

MxPhenom 216 · Jan 18, 2013, 09:09 PM

Said screw it, This thread can be closed.

claylomax · Jan 18, 2013, 10:01 PM

Oh, come on!

Jetster · Jan 18, 2013, 10:05 PM

What did you mess up

xBruce88x · Jan 25, 2013, 10:36 PM

Well then I guess ill have to re do mine instead... just need a dvd drive for it. Wonder if I can cram it in a itx case

MxPhenom 216 · Jan 26, 2013, 01:36 AM

Quote:

Originally Posted by Jetster

What did you mess up

New priorities have taken place.

Jetster · Jan 26, 2013, 02:46 AM

Quote:

Originally Posted by MxPhenom 216

New priorities have taken place.

I understand that

Sep 29, 2012, 03:51 AM	#1
MxPhenom 216 Knowledgeable Posting Whore Join Date: Aug 2010 Location: Seattle, WA Posts: 5,802 (5.82/day) Thanks: 1,288 Thanked 1,089 Times in 841 Posts System Specs	Phenoms Xbox 360 Rebuild Project Log Welcome to Phenoms Xbox 360 Rebuild Project Log As a lot of you guys may know, I made a thread will a poll a few days ago regarding if I should build an xbox with parts of have, and buy the parts I don't have. If you haven't seen the thread. Go HERE . I got more people either saying "No" or "Depends on how much you spend" but regardless of what they have said Im going to do it for fun. Ill try to limit the costs as much as possible, but I do plan to lose a bit of money, but I can risk that at this point. Doing this for fun, and thats the only benefit im expecting out of it. So I mentioned I have parts to be able to use. So far the list of parts of have are.... -Hitachi DVD Drive(I want to replace it with a Phillips so it won't put rings in game disks) -Heatsinks (most likely going to ditch them and get the better ones in the 2nd gen Zephyr revision Xbox and Falcon/Jasper xbox's) -Screws (but I need more) -X-clamps for the heatsinks -Fans(Going to ditch them as they are the old ones with the 4 pin pwoer rather then the 3 pin connector you would typically see in a PC today.) -White Faceplate -Top Panel -DVD drive eject button and front plate - Chrome and says Xbox 360 -Metal internal casing (It is a non hdmi version so unless i hack it up, ill get a new case) Parts I need to get: -Motherboard (Jasper Revision with Hitachi Drive PCB) -Screws -White plastic housing/casing -Metal internal casing for HDMI motherboards -Cooling fans with the 3 pin connector -Memory heat pads for the back side chips of the motherboard -Hard Drive(tentative) -Power Brick(175w) So when I was thinking about doing this, I wasn't planning on getting so much more parts, but once I started going through everything I had, I realized I needed more then I thought. Parts I have bought so far: 1. Xbox console from Ebay for parts (Cooling, casing, ring of light, memory heat pads, screws) The Xbox Once I get what i need out of this system, ill proceed on with everything else I need. At this time, I have nothing else for you guys. Stay tuned for next week when the xbox comes. Lots of pictures of my tear down will show up. This should be fun. Again, don't say its not worth it when it comes to funds, Im aware. __________________ Motocross is not just a sport, it's a lifestyle. File Server: Intel Pentium G630, 8GB PNY 1600, AsRock H77M Micro, Corsair CX430M, Vertex 2 90GB (OS), 2x WD Red 2TB in RAID1 “We will never know our full potential, unless we push ourselves to find it. -Travis Rice”

System Name:	My System
Processor:	Intel Core i5 2500k @ 4.5GHZ 1.36v
Motherboard:	AsRock Extreme4 Gen3 P67
Cooling:	EK Supremacy w/ Black Ice X-Flow 240
Memory:	Corsair Dominator Platinums 8GB 4GBx2 2133mhz 1.5v
Video Card:	EVGA Geforce GTX780 3GB
Hard Disk:	Samsung 830 128GB SSD, Corsair Neutron 240GB, Samsung F3 500GB
Optical Drive:	Asus 24x SATA DVD
CRT/LCD Model:	Dell U2412M IPS 24" 1920 x 1200
Case:	Corsair Carbide Series 500r w/ 2x Corsair AF120 fans
Sound Card:	HT Omega Striker 7.1
PSU:	Corsair HX850 Gen1 Silver
Software:	Windows 7 Ultimate 64-bit SP1

Sep 29, 2012, 04:13 AM	#2
manofthem Join Date: Jan 2011 Location: WPB, FL Posts: 3,342 (3.86/day) Thanks: 2,093 Thanked 2,516 Times in 1,278 Posts System Specs	Sub'd and looking forward to what's to come! __________________ My Heatware "P.S. Why buy from Newegg...when you can buy from Sneeky!" -LiNKiN

System Name:	Manofthem-PC [] Manofthem-PC2
Processor:	i7 2600k @ 4.5 [] i7 3770k
Motherboard:	Asus P8P67 Pro [] MSI Z68GD55
Cooling:	Water [] Air
Memory:	Samsung 8GB 1866 [] Samsung 8GB 1866
Video Card:	2x 7970's [] 7870 LE
Hard Disk:	2x 830's 256GB / 1.5TB / 2TB [] 500GB
CRT/LCD Model:	Shimian Achieva QH270-Lite [] Acer 27HL
Case:	CM Haf 932 [] Blawkhawk Advanced
Sound Card:	SB X-Fi Titanium [] Onboard
PSU:	Corsair 1000HX [] XFX 550Pro
Software:	Windows 8 Pro x64 [] Windows 7 Ult x64

System Name:	The Lazarus \ Bro's PC (previous build)
Processor:	Intel Core i5 750 @3.2GHz \ Intel Core i5 750
Motherboard:	ASUS Maximus III Extreme \ Gigabyte P55-USB3L
Cooling:	Corsair H50 (Modded) \ Hyper 212+ (lapped)
Memory:	mushkin enhanced 2x2GB-Corsair XMS3 2x2GB @1.65v \ pqi 2x2GB
Video Card:	Sparkle GTX 580 (stock,lapped) \ Gigabyte GV-N250-1GI (GTS 250)
Hard Disk:	2x160GB, 1x320GB, 1x500GB, 1x1TB, 1x2TB\ plenty
Optical Drive:	Pioneer BD-ROM-LG DVD-ROM \ HP DVD-ROM "light scribe"
CRT/LCD Model:	acer H235H 23" 1920x1080 \ Samsung SyncMaster 2333
Case:	CoolerMaster 690 nvidia edition \ Thermaltake V3 Black edition
Sound Card:	Creative SB X-Fi Titanium Fatal1ty Pro ,Creative Fatal1ty Gaming Headset \Onboard Realtek
PSU:	Mushkin enhanced Joule 700W \ COOLMAX RM-850B
Software:	Windows 7 Ultimate x64 SP1

Sep 30, 2012, 01:12 PM	#3
Doc41 Join Date: Sep 2010 Location: Bahrain Posts: 174 (0.18/day) Thanks: 156 Thanked 100 Times in 48 Posts System Specs	Sub'd, i love work logs and fun projects, if you feel like doing something, do it ; that's what i do

Oct 2, 2012, 05:29 PM	#5
MxPhenom 216 Knowledgeable Posting Whore Join Date: Aug 2010 Location: Seattle, WA Posts: 5,802 (5.82/day) Thanks: 1,288 Thanked 1,089 Times in 841 Posts System Specs	So I got my first part.............or i should say tool that I needed to be able to screw in all the torx screws the xbox uses. Its the perfect little tool, exactly what I needed. Torx Screw Driver Set __________________ Motocross is not just a sport, it's a lifestyle. File Server: Intel Pentium G630, 8GB PNY 1600, AsRock H77M Micro, Corsair CX430M, Vertex 2 90GB (OS), 2x WD Red 2TB in RAID1 “We will never know our full potential, unless we push ourselves to find it. -Travis Rice”

Oct 2, 2012, 05:40 PM	#6
erocker Senior Moderator Join Date: Jul 2006 Location: Milwaukee, WI. Posts: 31,958 (12.78/day) Thanks: 2,793 Thanked 12,320 Times in 7,832 Posts System Specs	No pics?

Processor:	Intel i7 3770K @ 4.6ghz 1.256v
Motherboard:	Asus Maximus V Formula
Cooling:	Water
Memory:	2x4gb Patriot Viper 2133mhz 10-11-10-25 2T 1.55v
Video Card:	Sapphire HD 7970 1125/1575 1.14v
Hard Disk:	Crucial M4 128Gb / Corsair Force 3 120Gb / Samsung 240Gb / 2Tb Seagate
Optical Drive:	None
CRT/LCD Model:	Acheiva Shimian 27" IPS 2560x1440
Case:	Corsair 500R White
Sound Card:	Onboard
PSU:	NZXT Hale90 1Kw
Software:	Windows 8 x64

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

Oct 2, 2012, 05:50 PM	#8
MxPhenom 216 Knowledgeable Posting Whore Join Date: Aug 2010 Location: Seattle, WA Posts: 5,802 (5.82/day) Thanks: 1,288 Thanked 1,089 Times in 841 Posts System Specs	Im waiting on the pictures till the xbox console i bought comes. Theres going to be a ton of tear down pictures. I was actually thinking about painting the internal casing black. and then the external plastic a more WHITE, and then the top grey panels black. __________________ Motocross is not just a sport, it's a lifestyle. File Server: Intel Pentium G630, 8GB PNY 1600, AsRock H77M Micro, Corsair CX430M, Vertex 2 90GB (OS), 2x WD Red 2TB in RAID1 “We will never know our full potential, unless we push ourselves to find it. -Travis Rice”

Oct 2, 2012, 06:52 PM	#9
t_ski Staff Join Date: Apr 2006 Location: Illinois, USA Posts: 8,847 (3.40/day) Thanks: 3,013 Thanked 3,314 Times in 2,531 Posts System Specs	At least you can post a picture of your tool. Wait, that didn't come out right... __________________ t_ski's stuff for sale ~ TPU Eyefinity Club ~ Heatware Silverstone TJ07 build ~ Mini ITX Home Server build Intel i7 3930K ~ Asus P9X79 Pro ~ 4 x 8GB Corsair Dominator Platinum 1866 C9 ~ Triple 7970's with EK FC-7970 CSQ ~ Triple Asus VW246H LCD's ~ 2 x 120 GB Corsair Force 3 (Raid 0) ~ 500GB WD ~ Lite-On BluRay ~ Nickel-plated Heatkiller 3.0 CU ~ D5 with EK X-top ~ BIX Quad Rad ~ Corsair AX1200 ~ Silverstone TJ07

System Name:	My i7 Beast
Processor:	Intel Core i7 3930K
Motherboard:	Asus P9X79 Pro
Cooling:	Heatkiller 3.0 Nickel, three FC-7970 CSQ with an FC-link , D5 with EK X-top Rev2 & BIX Quad Radiator
Memory:	4 x 8GB Corsair Dominator GT DDR3-1866
Video Card:	Two Sapphire 7970's + Asus 7970
Hard Disk:	2 x 120GB Corsair Force 3 SSDs in Raid 0 + 500GB WD
Optical Drive:	Lite-On BR Reader
CRT/LCD Model:	Three Asus 24" VW246H LCD's
Case:	Silverstone TJ07
Sound Card:	Onboard
PSU:	Corsair AX1200
Software:	Windows 7 x64 Ultimate

Oct 2, 2012, 11:15 PM	#10
MxPhenom 216 Knowledgeable Posting Whore Join Date: Aug 2010 Location: Seattle, WA Posts: 5,802 (5.82/day) Thanks: 1,288 Thanked 1,089 Times in 841 Posts System Specs	Ill post some pictures later of what I currently have in terms of parts. __________________ Motocross is not just a sport, it's a lifestyle. File Server: Intel Pentium G630, 8GB PNY 1600, AsRock H77M Micro, Corsair CX430M, Vertex 2 90GB (OS), 2x WD Red 2TB in RAID1 “We will never know our full potential, unless we push ourselves to find it. -Travis Rice”

Oct 2, 2012, 11:18 PM	#11
TacoTown Join Date: Jun 2011 Location: Canadia Posts: 1,826 (2.53/day) Thanks: 1,755 Thanked 927 Times in 551 Posts System Specs	It's been a while since I've broken apart a 360 but from what I remember I needed a lot more than just a plain old Torx screw driver. I may be wrong though. EDIT: apparently so http://www.llamma.com/xbox360/repair...isassembly.htm __________________ Can I see your brown ninja? I ate a taco for the first time ever today. Feb 27/2012 Steam: TacoTown Origin: TheTacoTown

System Name:	Sexy Vanilla Freshness / The Sister / The I don't know what to do with it
Processor:	Core i5 3570K @4.5ghz 1.25V/ Phenom II 925 @ 3.6ghz 1.2V / Phenom II 955
Motherboard:	ASUS P8Z77-V / Asrock A770De+ / M4A785-M
Cooling:	Coolit ECO A.C.L / Corsair H40 / stock
Memory:	M379B5273DH0-YK0 2X4GB sticks/ 8 gigs 667 / 6 gigs 667
Video Card:	Sapphire HD 6870 / XFX 5770 XXX edition / OEM 4670
Hard Disk:	Toshiba MK5065GSX+ST375052+WD10EZEX / 1x WD1500 Black / Seagate 160 gig
Optical Drive:	None / LG supermulti drive
CRT/LCD Model:	Acer S200HL+Acer P206HV / LG 22LD350 / N/A
Case:	HAF X 912 / NZXT Trinity / N/A
Sound Card:	Onboard / Onboard
PSU:	Seasonic 750X / ROSEWILL RG630-S12 630W RT / Bestec 400
Software:	Windows 7 Home Premium 64 bit / Windows 7 Ultimate / MacOS
Benchmarks:	Once I saw a turtle with a taco on it's back, I hope hes still out there. Rock on Taco turtle, rock

Oct 9, 2012, 08:11 AM	#13
MxPhenom 216 Knowledgeable Posting Whore Join Date: Aug 2010 Location: Seattle, WA Posts: 5,802 (5.82/day) Thanks: 1,288 Thanked 1,089 Times in 841 Posts System Specs	So this project is on stand by as ive decided to put a water cooling loop in my rig for my GTX680, so ill make a project log for that. __________________ Motocross is not just a sport, it's a lifestyle. File Server: Intel Pentium G630, 8GB PNY 1600, AsRock H77M Micro, Corsair CX430M, Vertex 2 90GB (OS), 2x WD Red 2TB in RAID1 “We will never know our full potential, unless we push ourselves to find it. -Travis Rice”

Oct 9, 2012, 08:53 AM	#14
freaksavior To infinity ... and beyond! Join Date: Dec 2006 Location: H-Town Texas Posts: 6,780 (2.88/day) Thanks: 1,031 Thanked 852 Times in 581 Posts System Specs	Subbed __________________ Heat My HTPC Guide freak's F/S thread Fill Out you sp here.

System Name:	0 Kelvin 5.0 / Server
Processor:	i7 930 \|\| Q6600
Motherboard:	EVGA Micro X58\|\| Asus Rampage Formula x48
Cooling:	Mugen2 \|\| Rocketfish
Memory:	6Gb Crucial Value 1800mhz\|\| 4gb Patriot SLI
Video Card:	2x Asus 5850CU 800/1200 \|\| ATI 6450
Hard Disk:	Intel 320 80gb SSD + 72.11 750Gb \|\| 3 x 2tb Sea + 2 x 500gb WD B
Optical Drive:	Samsung SH-S203N \|\| None
CRT/LCD Model:	2x Samsung 245BW \|\| Samsung 40" 650A
Case:	NZXT Rogue \|\| CM690
Sound Card:	Onboard \|\| ATI 6450
PSU:	8Silverstone DA800 \|\| Kingwin 1000w
Software:	7U x64 \|\| Windows 7
Benchmarks:	http://i99.photobucket.com/albums/l294/freaksavior/Overclocking-1.png

Jan 18, 2013, 09:09 PM	#15
MxPhenom 216 Knowledgeable Posting Whore Join Date: Aug 2010 Location: Seattle, WA Posts: 5,802 (5.82/day) Thanks: 1,288 Thanked 1,089 Times in 841 Posts System Specs	Said screw it, This thread can be closed. __________________ Motocross is not just a sport, it's a lifestyle. File Server: Intel Pentium G630, 8GB PNY 1600, AsRock H77M Micro, Corsair CX430M, Vertex 2 90GB (OS), 2x WD Red 2TB in RAID1 “We will never know our full potential, unless we push ourselves to find it. -Travis Rice”

Jan 18, 2013, 10:01 PM	#16
claylomax Join Date: Apr 2010 Location: London Posts: 1,385 (1.21/day) Thanks: 119 Thanked 251 Times in 217 Posts System Specs	Oh, come on! __________________ At the going down of the sun and in the morning, We will remember them

System Name:	Jaspe
Processor:	i7 3820 4.62Ghz 1.36v
Motherboard:	BIOSTAR TPower X79
Cooling:	Thermalright Archon Rev. A
Memory:	16Gb G.Skill Ripjaws 2000mhz
Video Card:	ATI HD7970
Hard Disk:	WD 600Gb Velociraptor
CRT/LCD Model:	Samsung 2433BW
Case:	Silverstone FT01B-W
Sound Card:	Onboard
PSU:	Antec Signature 650w
Software:	Windows 7 64

Jan 18, 2013, 10:05 PM	#17
Jetster Join Date: Jan 2010 Location: Oregon Posts: 2,880 (2.35/day) Thanks: 941 Thanked 866 Times in 633 Posts System Specs	What did you mess up

System Name:	Delta // HTPC
Processor:	Intel i7 3770K // Intel i3 550 3.2Ghz
Motherboard:	ASRock Z77 Extreme6 // Gigabyte GA-H55M-S2H Socket 1156
Cooling:	Corsair H100 // SILVERSTONE NT07-1156 90mm
Memory:	Corsair Vengeance 1866 16gb //Corsair DDR3 1600 4 Gb
Video Card:	HIS 7950 3 Gb //Sapphire 6670 1 Gb
Hard Disk:	Samsung 840 250 SSD, WD Caviar Blue 500// Corsair M4 64 Gb Solid State, SAMSUNG F4 2 Tb, WD 1 Tb
Optical Drive:	LG DVDR 24X // Lite on DVDR 24X
CRT/LCD Model:	HP 23xi IPS 1080p" // 50" Samsung Plasma 720p
Case:	Corsair Obsidian Series 550D // Silverstone Granada GD05
Sound Card:	ASUS Xonar DS // HDMI Bit Stream to Yamaha RX V571
PSU:	Seagate M12II 750 // Corsair CX 430
Software:	Windows 7 64bit // Windows 7 64bit with XBMC Eden
Benchmarks:	I scored P9327 in 3DMark 11

Jan 25, 2013, 10:36 PM	#18
xBruce88x Join Date: Oct 2009 Location: Winder, GA, USA Posts: 2,218 (1.70/day) Thanks: 652 Thanked 506 Times in 401 Posts System Specs	Well then I guess ill have to re do mine instead... just need a dvd drive for it. Wonder if I can cram it in a itx case

System Name:	Phenom-inal / IBM T43 2668-45U
Processor:	Phenom II X4 920 OC 3.2ghz / Pentium M 735 1.7Ghz
Motherboard:	ECS IC780M-A V2.0 / T43
Cooling:	7 80mm and 1 92mm case fan, Contac 30 / Stock
Memory:	Super Talent DDR2-800 2x 2GB + G.Skill 2x1GB DDR2 533 / 2x 1GB Samsung DDR2 533
Video Card:	ASUA DirectCU II HD 7850 2GB / ATI X300 64MB
Hard Disk:	500GB Hitachi 16mb 7200RPM, 1x 250GB seagate 2.5in 5400, 160GB IDE / 40GB
Optical Drive:	DVD/CD-RW combo 16x/48x Sony / DVD-ROM CD-R/RW combo
CRT/LCD Model:	ViewSonic @1280x1024 / 14.1in 1024x768
Case:	Unknown but cool / IBM Thinkpad T43
Sound Card:	Klipsch ProMedia 2.1 THX 200W and RT ALC662 / SoundMax via Intel
PSU:	CX500 / 6cell battery - 125w brick
Software:	Windows 7 Pro x64 / XP Pro SP3
Benchmarks:	The IBM can handle Farcry with Med/High settings

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Xbox 360 Rebuild/Repair?	MxPhenom 216	General Hardware	61	Oct 15, 2012 05:27 AM
My Project Log:	Cold Storm	Project Logs	1209	Feb 22, 2011 02:41 AM
[FS][US] PC Gaming Pad, Rock Band Bundle for Xbox 360, Xbox 360 Wireless Headset	AudiTuner	Buy/Sell/Trade/Giveaway Forum	3	Jun 23, 2010 12:30 PM
Tom Clancy's Splinter Cell: Conviction (Xbox 360) + Left 4 Dead 2 (Xbox 360) $63	fairytale00	Hot Deals	0	Apr 13, 2010 02:30 AM
[WTT] Zune And Xbox 360 for Xbox 360 elite	joinmeindeath417	Buy/Sell/Trade/Giveaway Forum	2	Jun 19, 2007 06:09 AM