SPDTool: Read, Edit and Flash your Memory's SPD - Page 9

Ketxxx · Jul 12, 2008, 11:59 AM

Quote:

Originally Posted by imperialreign

I tried submitting a couple of SPD dumps from a couple of el-cheapo low-end PNY Optima sticks and it pops up with this when I hit 'submit'

not sure if that's an error or not . . .

anyhow, if you didn't get those SPDs, I've got the dumps saved if you'd like to add them to the database, just let me know.

Dumps wernt submitted sucessfully. By the looks of all that HTML garble its a 404 error, so either the server was down at that time, or somebody messed up their HTML code somewhere.

vrdublu · Jul 13, 2008, 03:10 PM

Does anyone know where I can get a speed dump of Mushkin XP2-6400 DDR2-800 2GB (2x1024MB)CAS4-4-3-10 (996523). If anyone has these and wouldn't mind uploading it, I would greatly appreciate it.

Dr. Spankenstein · Jul 13, 2008, 03:14 PM

I'll give it a shot, don't know if it will work on an X38 board though.

At the latest, maybe Tuesday. I might have to plug by Bad Axe back in to upload.

Ketxxx · Jul 13, 2008, 03:16 PM

Does that kit have black heatspreaders?

Dr. Spankenstein · Jul 13, 2008, 03:26 PM

Yep. Them's the ones!

Ketxxx · Jul 13, 2008, 04:03 PM

SPDtool will work on a X38 board, as far as I know ICH9R is supported, ICH10R is not. (which means I'm screwed for editing speed dumps atm.... don't all look at me like scared ferrets thinking I'm going to make spdtool support ICH10R. W1z can do that

) Also, speed tables and timings would need to be adjusted, but using a spd dump from a 2GB kit of XP8000 should also work.

Dr. Spankenstein · Jul 13, 2008, 04:18 PM

Good to know! Thanks.

vrdublu, be looking for it sooner than later!

p_o_s_pc · Jul 13, 2008, 04:24 PM

Quote:

Originally Posted by Dippyskoodlez

Whoa.. wait.. I didn't realize this can edit SPD.

YEAH!!!!!!

You rock.

You need a cookie. Someone get this man a cookie!!!!!

here w1zzard is your cookie. sorry i took a bite its good

janjansen · Jul 14, 2008, 07:35 PM

I am getting the following error when I start SPDtool, even when I run the program as administrator:

‘No memory modules found. Incompatible SMbus driver?’

Think SPDtool is showing the correct error, it’s the Nvidia 780a chipset which is new on the market and had already my share of errors when installing Vista.

I urgently need to get SPDtool working, can't get 1066mhz without errors.
Has an new spd, has to flash it according to OCZ to solve my problems.

Any one solutions?

Ketxxx · Jul 14, 2008, 09:01 PM

What OCZ memory do you have? and SPDtool does not work on a P45 board atm.

Dr. Spankenstein · Jul 14, 2008, 09:19 PM

Well, I attempted to upload my info and got the same error as imperialreign.

I give.

Anyway, I determined I have the 996523 part.
Sorry...

janjansen · Jul 14, 2008, 09:55 PM

Quote:

Originally Posted by Ketxxx

What OCZ memory do you have? and SPDtool does not work on a P45 board atm.

OCZ2N1066SR1G 2 x 2G

vrdublu · Jul 15, 2008, 02:15 AM

Quote:

Originally Posted by Dr. Spankenstein

Well, I attempted to upload my info and got the same error as imperialreign.

I give.

Anyway, I determined I have the 996523 part.
Sorry...

Would you be able to email it to me? vrdublu@gmail.com

Ketxxx · Jul 15, 2008, 10:25 AM

Quote:

Originally Posted by janjansen

OCZ2N1066SR1G 2 x 2G

I have that exact same memory kit and its being pissy on my P5Q Pro, mind uploading the new spd data you have for them?

janjansen · Jul 15, 2008, 05:13 PM

Quote:

Originally Posted by Ketxxx

I have that exact same memory kit and its being pissy on my P5Q Pro, mind uploading the new spd data you have for them?

See http://www.ocztechnologyforum.com/fo...ad.php?t=37753
(post 2 is for 1GB)

But............................. ITS FOR THE PHENOM!!

Can advise you to contact, like I did, Eric Ryder OCZ forum support manager and tell him of your problem and he WILL advise you.

Dr. Spankenstein · Jul 16, 2008, 12:22 AM

Quote:

Originally Posted by vrdublu

Would you be able to email it to me? vrdublu@gmail.com

Done.

Here is the screen I promised.

Frick & Frack! TPU upload isn't working right for me...

Ketxxx · Jul 16, 2008, 01:16 AM

Quote:

Originally Posted by janjansen

See http://www.ocztechnologyforum.com/fo...ad.php?t=37753
(post 2 is for 1GB)

But............................. ITS FOR THE PHENOM!!

Can advise you to contact, like I did, Eric Ryder OCZ forum support manager and tell him of your problem and he WILL advise you.

Alright I'll keep that in mind. Fired the Crosshair up today and made some heavy changes to the spd data of these OCZ modules, hopefully the changes I made will make em work right.. but we'll see.

janjansen · Jul 16, 2008, 07:28 AM

Quote:

Originally Posted by Ketxxx

Alright I'll keep that in mind. Fired the Crosshair up today and made some heavy changes to the spd data of these OCZ modules, hopefully the changes I made will make em work right.. but we'll see.

Had my share of troubles with the Crosshair II Formula, was pestering Asus for 2 months and they released bios 0803; the release note state 'Enhanced compatibility with certain memory modules.'
With the bios 0803 my system is steady with 800mhz but I only could reach 1066mhz by changing the spd according to OCZ's posting.

System has been tested for several hours and was steady, even Prime95 had no errors!

Has cost me 2 months!

Ketxxx · Jul 16, 2008, 10:47 AM

I don't have the Crosshair 2, I got the original Crosshair. At this rate I'm thinking I should of stuck with my instincts and stayed away from OCZ like the plauge. Nothing but bad experiences with em. I'll be getting some Geil Black Dragon in the post tomorrow, There shouldnt be any issues with them, especially as I injected the Maximum 2 Formula memory table into my P5Q Pro BIOS. The M2F supports a crapload of Geil modules.

thebeephaha · Jul 16, 2008, 08:01 PM

Quote:

Originally Posted by vrdublu

Does anyone know where I can get a speed dump of Mushkin XP2-6400 DDR2-800 2GB (2x1024MB)CAS4-4-3-10 (996523). If anyone has these and wouldn't mind uploading it, I would greatly appreciate it.

I think I posted this earlier, do a search.

activated1 · Jul 26, 2008, 02:54 PM

Will there be support for Intel P45 chipset?

Ketxxx · Jul 26, 2008, 03:42 PM

Most likely w1z will do it when hes back, beyond that, your guess is as good as ours.

Jip · Sep 4, 2008, 04:50 PM

no news for the p45 ??

jindra · Sep 9, 2008, 04:14 PM

So this program is probably the only thing that saved me from buying incompatible memory with my laptop with a bios that does not downclock overspec dimms.

It it however telling me each time i'm writing that I have an INVALID CHECKSUM. How would I fix this problem and would this be the reason I am not getting dual channel mode out of the 2x ddr2 667 sodimms?

Edit
Ok nm I found the fix checksum, but i'm still getting only single channel mode on rs400 chipset, which should support dual channel.

iimdick2 · Sep 12, 2008, 02:34 AM

sorry for asking but can i know if its overclock the graphic card or gpu and how

System Name:	Prowler. V5.
Processor:	Q8400 @ 3.6GHz 450FSB (testing)
Motherboard:	P5Q Pro w\ my custom BIOS
Cooling:	CPU: CNPS 9500, VGA: VF900, RAM: XTC Cooler, Rest: 1x80mm LED, 2x 120mm LED, 1x 40mm LED, 1x 135mm
Memory:	2x2GB Transcend aXeRam PC2-8500
Video Card:	2x XFX HD4830 512MB
Hard Disk:	Maxtor DM10 NCQ, 16MB cache, SATA 250GB (WD Black 640GB ordered)
Optical Drive:	Pioneer 112DSV 18x dual DVD-RW, Lite-On 16x DVD combo
CRT/LCD Model:	22" LG Flatron W2242S
Case:	Unique
Sound Card:	Asus Xonar DX 7.1 PCI-E
PSU:	Hi-Power 800W Modular. 3.3 & 5v rails 30A, 4x 12v rails @ 20A each.
Software:	Windows 7 x64

Processor:	i7 3930K @ 4.2Ghz 1.26V :)
Motherboard:	Asus Sabertooth X79
Cooling:	WC Galore
Memory:	16Gb Kingston 2133
Video Card:	Dual GTX 580 SLI Watercooled
Hard Disk:	OCZ Vertex 3 SSD/Raid 0 + 2x WD Black 640/Raid 0
Optical Drive:	Pioneer dvd dual layer
CRT/LCD Model:	Asus 27" @ 1920 x 1080
Case:	Corsair 800D
Sound Card:	On Board High Def. Sennheiser PC360
PSU:	Seasonic 850W
Software:	W7 Ultimate 64 Bit

Jul 13, 2008, 03:14 PM	#203
Dr. Spankenstein Join Date: Feb 2007 Posts: 1,681 (0.73/day) Thanks: 217 Thanked 282 Times in 252 Posts System Specs	I'll give it a shot, don't know if it will work on an X38 board though. At the latest, maybe Tuesday. I might have to plug by Bad Axe back in to upload. __________________

Processor:	Intel C2D E8500 @ 4.25GHz (1.36V)
Motherboard:	Gigabyte GA-X38-DQ6
Cooling:	(Temporary) Tuniq Tower 120
Memory:	2GB Transcend aXeram 1200+
Video Card:	HIS HD3870 CF Volt modded
Hard Disk:	3 Seagate 320Gb Barracuda in an Intel Matrix Raid array
Optical Drive:	Pioneer DVR-110D
CRT/LCD Model:	Sony GDM-FW900 24" Widescreen CRT (a.k.a "The Shiznotch")
Case:	Ultra Aluminus Full Tower
Sound Card:	onboard Intel HD audio
PSU:	PC Power & Cooling Silencer 750
Software:	XP MCE + Vista (HP) dual-boot

Jul 13, 2008, 03:16 PM	#204
Ketxxx Eligible for custom title Join Date: Mar 2006 Location: Kingdom of gods Posts: 6,380 (2.42/day) Thanks: 35 Thanked 580 Times in 412 Posts System Specs	Does that kit have black heatspreaders? __________________ WARNING: I am cracking down on stupidity in the forums. Anyone caught making a dumb statement clearly not knowing many, if any of the facts, will promptly be directed to xtremesystems. Sig edited. If anyone wants to know about the E4400 (E7200 sold) drop me a PM

Jul 13, 2008, 03:10 PM	#202
vrdublu Join Date: Jan 2006 Posts: 136 (0.05/day) Thanks: 3 Thanked 3 Times in 3 Posts System Specs	Does anyone know where I can get a speed dump of Mushkin XP2-6400 DDR2-800 2GB (2x1024MB)CAS4-4-3-10 (996523). If anyone has these and wouldn't mind uploading it, I would greatly appreciate it.

Jul 13, 2008, 03:26 PM	#205
Dr. Spankenstein Join Date: Feb 2007 Posts: 1,681 (0.73/day) Thanks: 217 Thanked 282 Times in 252 Posts System Specs	Yep. Them's the ones! __________________

Jul 13, 2008, 04:03 PM	#206
Ketxxx Eligible for custom title Join Date: Mar 2006 Location: Kingdom of gods Posts: 6,380 (2.42/day) Thanks: 35 Thanked 580 Times in 412 Posts System Specs	SPDtool will work on a X38 board, as far as I know ICH9R is supported, ICH10R is not. (which means I'm screwed for editing speed dumps atm.... don't all look at me like scared ferrets thinking I'm going to make spdtool support ICH10R. W1z can do that ) Also, speed tables and timings would need to be adjusted, but using a spd dump from a 2GB kit of XP8000 should also work. __________________ WARNING: I am cracking down on stupidity in the forums. Anyone caught making a dumb statement clearly not knowing many, if any of the facts, will promptly be directed to xtremesystems. Sig edited. If anyone wants to know about the E4400 (E7200 sold) drop me a PM

Jul 13, 2008, 04:18 PM	#207
Dr. Spankenstein Join Date: Feb 2007 Posts: 1,681 (0.73/day) Thanks: 217 Thanked 282 Times in 252 Posts System Specs	Good to know! Thanks. vrdublu, be looking for it sooner than later! __________________

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

Jul 14, 2008, 07:35 PM	#209
janjansen Join Date: Oct 2005 Posts: 20 (0.01/day) Thanks: 2 Thanked 0 Times in 0 Posts	I am getting the following error when I start SPDtool, even when I run the program as administrator: ‘No memory modules found. Incompatible SMbus driver?’ Think SPDtool is showing the correct error, it’s the Nvidia 780a chipset which is new on the market and had already my share of errors when installing Vista. I urgently need to get SPDtool working, can't get 1066mhz without errors. Has an new spd, has to flash it according to OCZ to solve my problems. Any one solutions?

Jul 14, 2008, 09:01 PM	#210
Ketxxx Eligible for custom title Join Date: Mar 2006 Location: Kingdom of gods Posts: 6,380 (2.42/day) Thanks: 35 Thanked 580 Times in 412 Posts System Specs	What OCZ memory do you have? and SPDtool does not work on a P45 board atm. __________________ WARNING: I am cracking down on stupidity in the forums. Anyone caught making a dumb statement clearly not knowing many, if any of the facts, will promptly be directed to xtremesystems. Sig edited. If anyone wants to know about the E4400 (E7200 sold) drop me a PM

Jul 14, 2008, 09:19 PM	#211
Dr. Spankenstein Join Date: Feb 2007 Posts: 1,681 (0.73/day) Thanks: 217 Thanked 282 Times in 252 Posts System Specs	Well, I attempted to upload my info and got the same error as imperialreign. I give. Anyway, I determined I have the 996523 part. Sorry... __________________

Jul 16, 2008, 10:47 AM	#219
Ketxxx Eligible for custom title Join Date: Mar 2006 Location: Kingdom of gods Posts: 6,380 (2.42/day) Thanks: 35 Thanked 580 Times in 412 Posts System Specs	I don't have the Crosshair 2, I got the original Crosshair. At this rate I'm thinking I should of stuck with my instincts and stayed away from OCZ like the plauge. Nothing but bad experiences with em. I'll be getting some Geil Black Dragon in the post tomorrow, There shouldnt be any issues with them, especially as I injected the Maximum 2 Formula memory table into my P5Q Pro BIOS. The M2F supports a crapload of Geil modules. __________________ WARNING: I am cracking down on stupidity in the forums. Anyone caught making a dumb statement clearly not knowing many, if any of the facts, will promptly be directed to xtremesystems. Sig edited. If anyone wants to know about the E4400 (E7200 sold) drop me a PM

System Name:	NORMANDY
Processor:	Intel Core i7 920 D0 @ 4GHz OC (20x200) 1.318v / 1.31v VTT
Motherboard:	DFI LP UT X58-T3eH8 w/ Xigmatek Porter N881 on the NB
Cooling:	Cooler Master Hyper 212 Plus (CM Beta Test!) + Dual AC AF12025 PWM Fans
Memory:	12GB Kingston HyperX 1600 9-9-9-27 1.65v (3x4GB) - Thanks to t_ski for these!
Video Card:	GTX285 1GB BFG OC2 w/ modded Accelero Xtreme 280 @ 702/1584/2664 OC
Hard Disk:	4xOCZ Summit 60GB SSDs in RAID0 via Adaptec 5405
Optical Drive:	Samsung DVD-RW DL SH-S203B 20x SATA (meh)
CRT/LCD Model:	20" Viewsonic VP201b on left, 24" Dell 2407WFP in middle, 22" Viewsonic VX2233wm on right
Case:	CM Stacker 832 + 8x120mm CM TLF-S12-EB \| 1x120mm AC AF12025 PWM \| 1x92mm SilverStone FN83 fans
Sound Card:	Creative X-Fi Xtreme Gamer
PSU:	Cooler Master Ultimate Circuit Protection 900w (CM Beta Test!)
Software:	Microsoft Windows 7 Ultimate x64
Benchmarks:	3DMark06: n/a \| 3DMark Vantage: n/a

Jul 26, 2008, 02:54 PM	#221
activated1 Join Date: Jun 2008 Location: Sombor, Serbia. Posts: 33 (0.02/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	Will there be support for Intel P45 chipset?

System Name:	Core2
Processor:	Intel C2D E5200 @ 3.8Ghz
Motherboard:	ASUS P5K
Cooling:	Thermalright Ultra 120A
Memory:	4x 1Gb Kingston KHX8500
Video Card:	XFX 9600GSO
Hard Disk:	WD 3200KS &WD 3200AAJS
Optical Drive:	Optiarc AD-7200S
CRT/LCD Model:	acer x223w
Case:	Antec P182
Sound Card:	Realtek HD
PSU:	Thermaltake Toughpower 700W Modular

Jul 26, 2008, 03:42 PM	#222
Ketxxx Eligible for custom title Join Date: Mar 2006 Location: Kingdom of gods Posts: 6,380 (2.42/day) Thanks: 35 Thanked 580 Times in 412 Posts System Specs	Most likely w1z will do it when hes back, beyond that, your guess is as good as ours. __________________ WARNING: I am cracking down on stupidity in the forums. Anyone caught making a dumb statement clearly not knowing many, if any of the facts, will promptly be directed to xtremesystems. Sig edited. If anyone wants to know about the E4400 (E7200 sold) drop me a PM

Sep 4, 2008, 04:50 PM	#223
Jip Join Date: Jun 2008 Location: Oupeye - Belgium Posts: 3 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	no news for the p45 ?? __________________ [img disabled]http://www.hwbot.org/signature/u9347.png[/IMG] Jip on the Bot

System Name:	PC
Processor:	E8500
Motherboard:	MSI P35 Platinum \| Foxconn Mars P35
Cooling:	Noctua NH C12P
Memory:	2Go CellShock PC6400 Micron
Video Card:	GTS² \| 3850 \| 4850
Hard Disk:	Seagate 7200.11 500Go 32Mo
CRT/LCD Model:	Samsung 226BW
Case:	XClio A380
PSU:	Corsair HX520w

Sep 9, 2008, 04:14 PM	#224
jindra Join Date: Sep 2008 Posts: 1 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	So this program is probably the only thing that saved me from buying incompatible memory with my laptop with a bios that does not downclock overspec dimms. It it however telling me each time i'm writing that I have an INVALID CHECKSUM. How would I fix this problem and would this be the reason I am not getting dual channel mode out of the 2x ddr2 667 sodimms? Edit Ok nm I found the fix checksum, but i'm still getting only single channel mode on rs400 chipset, which should support dual channel. Last edited by jindra; Sep 9, 2008 at 10:33 PM.

Sep 12, 2008, 02:34 AM	#225
iimdick2 Join Date: Sep 2008 Posts: 7 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	sorry for asking but can i know if its overclock the graphic card or gpu and how

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)