Jetart JACSH1

W1zzard · Apr 21, 2005, 03:55 PM

To read this review go to: http://www.techpowerup.com/reviews/Jetart/JACSH1/

May 10, 2005, 09:42 AM

The screws have to be that small to fit on GF6xxx-cards which have smaller mounting holes, a fact that many people overlooked when buying heatpipe-coolers - some manufacturers reacted and put an extra set of screws in their packages.
But in this case, where the screws have counterparts mounted on the underside of the cooler, more extra parts would´ve been needed. I guess it was an economical decision and as you´ve pointed out in your review, the screws still hold the cooler quite tight.

Muk · May 12, 2005, 05:40 PM

does this cooler use two slots?

Muk · May 25, 2005, 12:37 AM

anyone know?

W1zzard · May 25, 2005, 07:41 AM

it uses like 1.5

but since it draw air from the bottom of the card it could be considered 2 slot if you want your card to stay cool.

Muk · May 29, 2005, 05:28 AM

could you tell me what the height is from the base to the top? i am trying to fit it in a sff

notinthisworld · Nov 8, 2006, 11:45 AM

can i use this for my Powercolor 9800se ? im planning to flash my 9800se to 9800xt. thnx.

God Bless

Apr 21, 2005, 03:55 PM	#1
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,780 (4.18/day) Thanks: 184 Thanked 10,239 Times in 3,170 Posts System Specs	Jetart JACSH1 To read this review go to: http://www.techpowerup.com/reviews/Jetart/JACSH1/ Last edited by W1zzard; May 11, 2005 at 02:25 PM.

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

May 12, 2005, 05:40 PM	#3
Muk Join Date: Sep 2004 Posts: 15 (0.00/day) Thanks: 0 Thanked 1 Time in 1 Post	mmm does this cooler use two slots?

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

May 10, 2005, 09:42 AM	#2
Unregistered Guest Posts: n/a (0/day)	The screws have to be that small to fit on GF6xxx-cards which have smaller mounting holes, a fact that many people overlooked when buying heatpipe-coolers - some manufacturers reacted and put an extra set of screws in their packages. But in this case, where the screws have counterparts mounted on the underside of the cooler, more extra parts would´ve been needed. I guess it was an economical decision and as you´ve pointed out in your review, the screws still hold the cooler quite tight.

May 25, 2005, 12:37 AM	#4
Muk Join Date: Sep 2004 Posts: 15 (0.00/day) Thanks: 0 Thanked 1 Time in 1 Post	anyone know?

May 25, 2005, 07:41 AM	#5
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,780 (4.18/day) Thanks: 184 Thanked 10,239 Times in 3,170 Posts System Specs	it uses like 1.5 but since it draw air from the bottom of the card it could be considered 2 slot if you want your card to stay cool.

May 29, 2005, 05:28 AM	#6
Muk Join Date: Sep 2004 Posts: 15 (0.00/day) Thanks: 0 Thanked 1 Time in 1 Post	could you tell me what the height is from the base to the top? i am trying to fit it in a sff

Nov 8, 2006, 11:45 AM	#7
notinthisworld Join Date: Nov 2006 Posts: 7 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	can i use this for my Powercolor 9800se ? im planning to flash my 9800se to 9800xt. thnx. God Bless

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)