BSOD error messages, assumed to be from overclocking.

WarEagleAU · Apr 26, 2007, 10:26 PM

Alright, I got this error message today and it was the only one I had time to be able to see and write down. This is what it said.

IRQL_NOT_LESS_OR_EQUAL

STOP: 0x00000004, (0x6D58337f, 0X00000002, 0X00000000, 0X806E772F)

any clues to what this is. Too much voltage to proc? Unstable FSB setting with a 3x LDT (HTT) and 8.5 on my Opty 165 mutli?

thanks guys

JrRacinFan · Apr 26, 2007, 10:45 PM

SOunds to myself either PSU related, not enough vcore to cpu, or too high of an OC. Whats your cpu voltage set at?

DRDNA · Apr 26, 2007, 10:49 PM

yup thats your CPU erroring out from t0o much OC....Sometime you can regain stability from raising the cpu Vcore but keep an eye on the heat

WarEagleAU · Apr 27, 2007, 10:28 PM

currently, my Vcore is sitting at 1.350V. So my OC was reset when I shutdown last night, oh well. Ill get it back to 8.5X @ 329FSB and 600mhz ldt to make it 2.8ghz. I tried increase my vcore up to 1.50 (still heat didnt make my watercooled thing go up but to 32c) but It still didnt stable out. Im thinking 328 at 1.350 or 1.3750 is my max on cpu. Then Ill need to work with my dram settings to make it the best. I think the PSU, which is decent, isnt enough to give me the 3.0 ghz stable water cooling I was hoping for.

Solaris17 · Apr 27, 2007, 10:35 PM

cpu really? i mean it isnt a memory dump but that looks like a memory error...oooonvm dumb less than or equal yup cpu..hmm you might want to check NB volts as well. its uncomfirmed but raising the NB vcore let me pass 2.25 on my barton got it stable at 2.34

DRDNA · Apr 27, 2007, 11:24 PM

Quote:

Originally Posted by Solaris17

cpu really? i mean it isnt a memory dump but that looks like a memory error...oooonvm dumb less than or equal yup cpu..hmm you might want to check NB volts as well. its uncomfirmed but raising the NB vcore let me pass 2.25 on my barton got it stable at 2.34

Thats what i thought on my stuff too , but i wammied the ram into submission (wasnt even

at 200mhz and same issue till i lowered the cpu mhz)

WarEagleAU · Apr 28, 2007, 12:45 AM

yeah, Im up to max on one of my setting I think the NB1.2 is at 2.0 and the nb 1.8 is at 1.4 (still have room to go higher). I havent messed with ram, have it set to DDR266. Thing is, if its not my psu, getting the vcore to 1.5 or 1.55 with watercooling and the right timings, should get me the 3.0ghz magical number. I dont really need to get to that, Id love to, but I dont need to, just want to see if I can get it stable. Id probably run it stable around 2.9 or so.

Paulieg · Apr 28, 2007, 12:56 AM

The Stop 0xA message indicates that a kernel-mode process or driver attempted to access a memory location to which it did not have permission, or at a kernel interrupt request level (IRQL) that was too high. A kernel-mode process can access only other processes that have an IRQL lower than, or equal to, its own. This Stop message is typically due to faulty or incompatible hardware or software.

Possible Resolutions:

A Stop 0xA message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update.

A Stop 0xA message might also be due to failing or defective hardware. If a Stop message points to a category of devices (video or disk adapters, for example), try removing or replacing the hardware to determine if it is causing the problem.

Wile E · Apr 28, 2007, 01:00 AM

Is 8.5 the highest multi you can run Eagle?

theonetruewill · Apr 28, 2007, 01:45 PM

I get that erros message after to high an oc on either my laptop gfx or cpu oc.

It alo happened when my PSU failed ot give the right voltage to my 4600X2. It can't give it a stable 1.5v as it kept fluctuating erratically so that happened.

The memory wasn't the problem its voltage flucuation related or too high an oc/lack of voltage related

WarEagleAU · Apr 28, 2007, 02:49 PM

my highest is 9. I know a few others at the Abit forums that are using the 9 multi. I cant seem to even get to 300*9 right now. Im running stock (which btw, is fast as shit right now) because I got frustrated and was gonna break something <G>. Ive tried messing with just about everything. Ill probably have to start back in increments, or reload windows, which would really suck.

Wile E · Apr 28, 2007, 03:19 PM

I was just asking because I know my cpu hate half multis, but apparently you don't have the same issue.

DRDNA · Apr 28, 2007, 03:58 PM

get to 300*9<< try puting your ram on a divider, like maybe 166 or 100 and see if you can get it . Also rememder to drop the mobo to 3 for 300*9

WarEagleAU · Apr 28, 2007, 06:07 PM

LDT (HTT) is at 600mhz. I had it to 9*300, but LiNKiN and I was going a different route seeing as its a known fact that this Opty hates odd multis. Ill give it a shot here later though. I need to reboot my brain. Thanks for all the help

Apr 26, 2007, 10:26 PM	#1
WarEagleAU Bird of Prey Join Date: Jul 2006 Location: Gurley, AL Posts: 9,994 (3.99/day) Thanks: 3,810 Thanked 557 Times in 521 Posts System Specs	BSOD error messages, assumed to be from overclocking. Alright, I got this error message today and it was the only one I had time to be able to see and write down. This is what it said. IRQL_NOT_LESS_OR_EQUAL STOP: 0x00000004, (0x6D58337f, 0X00000002, 0X00000000, 0X806E772F) any clues to what this is. Too much voltage to proc? Unstable FSB setting with a 3x LDT (HTT) and 8.5 on my Opty 165 mutli? thanks guys __________________ =-TheEagle-= http://www.heatware.com/eval.php?id=62454 “You crazy? Surfing any website without an antivirus is like freaking with a dirty woman without protection” -OzzmanFloyd120 - Edited for content and clarity

System Name:	Boddha Getta
Processor:	AMD FX 6100 @ 4.432Ghz @1.401V
Motherboard:	ASUS M5A99X EVO AMD 990X AMD SB950
Cooling:	Custom Water. EK 240MM Kit, Supreme HSF - Runs 35C
Memory:	2 x 4GB Corsair Vengeance White LP @ 1.35V
Video Card:	XFX Radeon HD 6870 900/1050 (no OC yet)
Hard Disk:	WD Caviar Black 1.0TB, WD Caviar Green 1.0TB, WD 160GB
Optical Drive:	Samung SH22SL 22X Lightscribe DVD+/-R/RW LG BDRE Reader/Burner Lite ON Max Burner for burning Xbox
CRT/LCD Model:	Asus VH222/S 22: (21.5" Viewable) 1920x1080p HDMI LCD Monitor
Case:	NZXT White Phantom
Sound Card:	Onboard Realtek 5.1
PSU:	NZXT Hale 90 Gold Cert 750W Modular PSU
Software:	Windows 7 Pro 64 bit.
Benchmarks:	5.9 Windows Index rating 3D06 - 17472

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

Apr 26, 2007, 10:49 PM	#3
DRDNA Join Date: Feb 2006 Location: New York Posts: 4,122 (1.56/day) Thanks: 612 Thanked 494 Times in 424 Posts System Specs	yup thats your CPU erroring out from t0o much OC....Sometime you can regain stability from raising the cpu Vcore but keep an eye on the heat __________________ Asus P6T Deluxe Intel X58/ i7-920CO@4.2GHZ 24/7 <> CORSAIR DOMINATOR 6GB (3 x 2GB) DDR3 1600.<> ThermalTake ToughPower 1200 WATT PSU 2X ATI Radeon HD 4870 X2 2GB DDR5 <> Asetek Liquid CPU Cooling System 320GBx4 Perpendicular RAID-0/BLU-RAY/HD-DVD Reader / DVD±R/±RW Writer LG 50" 50PK550 1080p 600Hz Plasma/WestingHouse 37 inch @1920X1080/Windows 7 Pro/64

System Name:	http://www.heatware.com/eval.php?id=73751
Processor:	i7-920 CO@4.2GHZ
Motherboard:	Asus P6T Deluxe Intel X58
Cooling:	Asetek Liquid CPU Cooling System
Memory:	CORSAIR DOMINATOR 6GB (3 x 2GB) DDR3 1600
Video Card:	2X ATI Radeon HD 4870 X2 2GB DDR5 PCI-Express
Hard Disk:	(RAID-0) with 4 Identical Hard Drives (1.28TB (320GBx4)
Optical Drive:	LG BLU-RAY/HD-DVD Reader / DVD±R/±RW Writer
CRT/LCD Model:	LG 50" 50PK550 1080p 600Hz Plasma/37 Inch WestingHouse @1920x1080
Case:	Thermaltake M9 (I hate it its like trying to live in a 1 inch box)
PSU:	ThermalTake ToughPower 1200 Watt
Software:	Windows 7 professional 64

Apr 26, 2007, 10:45 PM	#2
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.15/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	SOunds to myself either PSU related, not enough vcore to cpu, or too high of an OC. Whats your cpu voltage set at?

Apr 27, 2007, 10:28 PM	#4
WarEagleAU Bird of Prey Join Date: Jul 2006 Location: Gurley, AL Posts: 9,994 (3.99/day) Thanks: 3,810 Thanked 557 Times in 521 Posts System Specs	currently, my Vcore is sitting at 1.350V. So my OC was reset when I shutdown last night, oh well. Ill get it back to 8.5X @ 329FSB and 600mhz ldt to make it 2.8ghz. I tried increase my vcore up to 1.50 (still heat didnt make my watercooled thing go up but to 32c) but It still didnt stable out. Im thinking 328 at 1.350 or 1.3750 is my max on cpu. Then Ill need to work with my dram settings to make it the best. I think the PSU, which is decent, isnt enough to give me the 3.0 ghz stable water cooling I was hoping for. __________________ =-TheEagle-= http://www.heatware.com/eval.php?id=62454 “You crazy? Surfing any website without an antivirus is like freaking with a dirty woman without protection” -OzzmanFloyd120 - Edited for content and clarity

Apr 27, 2007, 10:35 PM	#5
Solaris17 Creator Solaris Utility DVD Join Date: Aug 2005 Location: Reinacting scenes from platoon with Charlie Sheen Posts: 13,708 (4.84/day) Thanks: 4,365 Thanked 3,295 Times in 2,311 Posts System Specs	cpu really? i mean it isnt a memory dump but that looks like a memory error...oooonvm dumb less than or equal yup cpu..hmm you might want to check NB volts as well. its uncomfirmed but raising the NB vcore let me pass 2.25 on my barton got it stable at 2.34 __________________ I Made the Millionth post! \| "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide Vista Mark

System Name:	Prometheus
Processor:	Xeon W 3520 4.5ghz
Motherboard:	DFI Lanparty UT t3eH8
Cooling:	Xigmatek Dark Knight
Memory:	(3x8GB) 24GB Avexir Core series triple channel 1600mhz
Video Card:	MSI GTX470
Hard Disk:	OCZ Agility3 120, SS 1TB, SS 2TB
Optical Drive:	Pioneer DVD Dual layer burner R+RW (Firmware Upgrade)/Philips lightscribe DVD burner Dual layer
CRT/LCD Model:	Dell 2007FP
Case:	Xigmatek Utgard
Sound Card:	ASUS Xonar D2X 7.1 on Logitec X-540/Razer Carcharias
PSU:	Corsair HX1000
Software:	Windows8 x64 \|\|Poser7, Cinema4D, CS5, 3DSM10, Lightwave9, Bryce7
Benchmarks:	I'm such a tease

Apr 28, 2007, 12:45 AM	#7
WarEagleAU Bird of Prey Join Date: Jul 2006 Location: Gurley, AL Posts: 9,994 (3.99/day) Thanks: 3,810 Thanked 557 Times in 521 Posts System Specs	yeah, Im up to max on one of my setting I think the NB1.2 is at 2.0 and the nb 1.8 is at 1.4 (still have room to go higher). I havent messed with ram, have it set to DDR266. Thing is, if its not my psu, getting the vcore to 1.5 or 1.55 with watercooling and the right timings, should get me the 3.0ghz magical number. I dont really need to get to that, Id love to, but I dont need to, just want to see if I can get it stable. Id probably run it stable around 2.9 or so. __________________ =-TheEagle-= http://www.heatware.com/eval.php?id=62454 “You crazy? Surfing any website without an antivirus is like freaking with a dirty woman without protection” -OzzmanFloyd120 - Edited for content and clarity

Apr 28, 2007, 12:56 AM	#8
Paulieg The Mad Moderator Join Date: Feb 2007 Location: Wherever I can find the iron. Posts: 11,448 (5.02/day) Thanks: 2,519 Thanked 3,054 Times in 2,098 Posts System Specs	The Stop 0xA message indicates that a kernel-mode process or driver attempted to access a memory location to which it did not have permission, or at a kernel interrupt request level (IRQL) that was too high. A kernel-mode process can access only other processes that have an IRQL lower than, or equal to, its own. This Stop message is typically due to faulty or incompatible hardware or software. Possible Resolutions: A Stop 0xA message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. A Stop 0xA message might also be due to failing or defective hardware. If a Stop message points to a category of devices (video or disk adapters, for example), try removing or replacing the hardware to determine if it is causing the problem. __________________ "I have found the Iron to be my greatest friend. It never freaks out on me, never runs. Friends may come and go. But two hundred pounds is always two hundred pounds." -Henry Rollins My heatware Save lives by joining the TPU WCG team!

Apr 28, 2007, 01:00 AM	#9
Wile E Power User Join Date: Oct 2006 Location: Western PA (Pittsburgh suburbs) Posts: 18,129 (7.48/day) Thanks: 450 Thanked 3,825 Times in 3,123 Posts System Specs	Is 8.5 the highest multi you can run Eagle? __________________ Visit Ashentech “What the hell did you expect? Leave Vista under the pillow and the OS fairy would make it Win7?” -El Fiendo “And Bring Mailman back god damnit, he is the Eric Cartman of TPU” -MRCL

System Name:	The ClusterF**k
Processor:	980X @ 4212Mhz 24/7
Motherboard:	Gigabyte GA-EX58-UD5 BIOS F12
Cooling:	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory:	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24
Video Card:	Evga GTX 580
Hard Disk:	Seagate 7200.10 320GB x2 RAID0; 2 x Samsung F2 1.5TB; 1 x F1 1TB; 1 x F4 2TB
Optical Drive:	LG WH10LS30K 10X Blu-ray Burner
CRT/LCD Model:	HP LP2475w 24" 1920x1200 IPS
Case:	Technofront Bench Station
Sound Card:	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
PSU:	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software:	Win7 Ultimate N x64

Apr 28, 2007, 01:45 PM	#10
theonetruewill Join Date: Nov 2006 Location: London - Close your eyes and you'll see me Posts: 2,618 (1.10/day) Thanks: 364 Thanked 246 Times in 195 Posts System Specs	I get that erros message after to high an oc on either my laptop gfx or cpu oc. It alo happened when my PSU failed ot give the right voltage to my 4600X2. It can't give it a stable 1.5v as it kept fluctuating erratically so that happened. The memory wasn't the problem its voltage flucuation related or too high an oc/lack of voltage related __________________ Laptop Overclockers Club - Take a look at this - Please vote “we're a split personality of shy lesbians” -W1zzard “i really find it amazing sometimes with what kinds of threads you people can come up ” -W1zzard Game Republic!

System Name:	COLOSSUS-MK4
Processor:	E8400 @4.4 GHz - FSB @550 MHZ
Motherboard:	Asus P5K Premium (Black Pearl)
Cooling:	Xigmatek HDT-S1283
Memory:	2x1GB Geil BlckDrgn 800 @1158 5-5-5-18
Video Card:	8800GT 512MB @740/1782/2080
Hard Disk:	Hitachi T7K250 250GB & 7200.10 Seagate 250GB
Optical Drive:	Asus Lightscribe DVD R/RW
CRT/LCD Model:	Gateway FPD1975W 19" Widescreen
Case:	Antec 1200
Sound Card:	Xi-FI Xtreme Audio
PSU:	CoolerMaster IGreen 500W
Software:	XP Home SP3
Benchmarks:	SuperPi: 10.563 Sciencemark: 2563.14

Apr 28, 2007, 02:49 PM	#11
WarEagleAU Bird of Prey Join Date: Jul 2006 Location: Gurley, AL Posts: 9,994 (3.99/day) Thanks: 3,810 Thanked 557 Times in 521 Posts System Specs	my highest is 9. I know a few others at the Abit forums that are using the 9 multi. I cant seem to even get to 300*9 right now. Im running stock (which btw, is fast as shit right now) because I got frustrated and was gonna break something <G>. Ive tried messing with just about everything. Ill probably have to start back in increments, or reload windows, which would really suck. __________________ =-TheEagle-= http://www.heatware.com/eval.php?id=62454 “You crazy? Surfing any website without an antivirus is like freaking with a dirty woman without protection” -OzzmanFloyd120 - Edited for content and clarity

Apr 28, 2007, 03:19 PM	#12
Wile E Power User Join Date: Oct 2006 Location: Western PA (Pittsburgh suburbs) Posts: 18,129 (7.48/day) Thanks: 450 Thanked 3,825 Times in 3,123 Posts System Specs	I was just asking because I know my cpu hate half multis, but apparently you don't have the same issue. __________________ Visit Ashentech “What the hell did you expect? Leave Vista under the pillow and the OS fairy would make it Win7?” -El Fiendo “And Bring Mailman back god damnit, he is the Eric Cartman of TPU” -MRCL

Apr 28, 2007, 03:58 PM	#13
DRDNA Join Date: Feb 2006 Location: New York Posts: 4,122 (1.56/day) Thanks: 612 Thanked 494 Times in 424 Posts System Specs	get to 3009<< try puting your ram on a divider, like maybe 166 or 100 and see if you can get it . Also rememder to drop the mobo to 3 for 3009 __________________ Asus P6T Deluxe Intel X58/ i7-920CO@4.2GHZ 24/7 <> CORSAIR DOMINATOR 6GB (3 x 2GB) DDR3 1600.<> ThermalTake ToughPower 1200 WATT PSU 2X ATI Radeon HD 4870 X2 2GB DDR5 <> Asetek Liquid CPU Cooling System 320GBx4 Perpendicular RAID-0/BLU-RAY/HD-DVD Reader / DVD±R/±RW Writer LG 50" 50PK550 1080p 600Hz Plasma/WestingHouse 37 inch @1920X1080/Windows 7 Pro/64

Apr 28, 2007, 06:07 PM	#14
WarEagleAU Bird of Prey Join Date: Jul 2006 Location: Gurley, AL Posts: 9,994 (3.99/day) Thanks: 3,810 Thanked 557 Times in 521 Posts System Specs	LDT (HTT) is at 600mhz. I had it to 9*300, but LiNKiN and I was going a different route seeing as its a known fact that this Opty hates odd multis. Ill give it a shot here later though. I need to reboot my brain. Thanks for all the help __________________ =-TheEagle-= http://www.heatware.com/eval.php?id=62454 “You crazy? Surfing any website without an antivirus is like freaking with a dirty woman without protection” -OzzmanFloyd120 - Edited for content and clarity

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)