No ATI Card detected

nvteleskier · May 30, 2005, 08:36 PM

I have an ATI X800Pro Vivo card, ATI Tool version .024 and everything has been great. Overclocked card is currently running 580 core/ 555 memory, stable. This morning when I started ATI Tool, it gave me the message no ATI Card detected. It did start at the o/c'd setting. I uninstalled and rebooted, reinstalled and everything was okay. On the next start this afternoon, I received the same message.

Any ideas?

W1zzard · May 30, 2005, 09:18 PM

is it still happening after reinstallation? any way to reproduce it?

nvteleskier · May 30, 2005, 10:17 PM

I guess I will just uninstall again and reboot. Install one more time. It's strange that it loads the o/c'd setting, but lists no default speeds, that's grayed out and says 0.00/0.00.

Is there a past version I could try?

W1zzard · May 30, 2005, 10:26 PM

i would rather try to get this bug fixed than to see you running an older version

do you have multiple video cards in the drop down in settings -> overclocking?

nvteleskier · May 31, 2005, 12:21 AM

in the "overclocking" section there are no video cards at all, it's blank
Catalyst version 5.2
Device id 0000
Chip type unknown
Memory size 0MB
Memory bus width 0 bit
Active pipelines 0
Default GPU clock 0.00mhz
Default Mem clock 0.00mhz

The drop down menu is also missing the fan settings
I've run a few benchmarking utilities I use and they show I'm still oc'd

W1zzard · May 31, 2005, 07:23 AM

ok .. google debugview and install it, leave it running while uninstalling and then installing atitool, paste its output here

nvteleskier · Jun 2, 2005, 04:11 AM

Uninstalled ATI Tools, saved settings, rebooted and reinstalled. Everything has been working.
Nothing has changed, no new drivers, etc.

If this pops up again I'll be back!
Thanks for your help.

May 30, 2005, 08:36 PM	#1
nvteleskier Join Date: May 2005 Posts: 5 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	No ATI Card detected I have an ATI X800Pro Vivo card, ATI Tool version .024 and everything has been great. Overclocked card is currently running 580 core/ 555 memory, stable. This morning when I started ATI Tool, it gave me the message no ATI Card detected. It did start at the o/c'd setting. I uninstalled and rebooted, reinstalled and everything was okay. On the next start this afternoon, I received the same message. Any ideas?

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

May 30, 2005, 10:17 PM	#3
nvteleskier Join Date: May 2005 Posts: 5 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Running overclocked I guess I will just uninstall again and reboot. Install one more time. It's strange that it loads the o/c'd setting, but lists no default speeds, that's grayed out and says 0.00/0.00. Is there a past version I could try?

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

May 30, 2005, 09:18 PM	#2
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,758 (4.18/day) Thanks: 184 Thanked 10,208 Times in 3,157 Posts System Specs	is it still happening after reinstallation? any way to reproduce it?

May 30, 2005, 10:26 PM	#4
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,758 (4.18/day) Thanks: 184 Thanked 10,208 Times in 3,157 Posts System Specs	i would rather try to get this bug fixed than to see you running an older version do you have multiple video cards in the drop down in settings -> overclocking?

May 31, 2005, 12:21 AM	#5
nvteleskier Join Date: May 2005 Posts: 5 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	in the "overclocking" section there are no video cards at all, it's blank Catalyst version 5.2 Device id 0000 Chip type unknown Memory size 0MB Memory bus width 0 bit Active pipelines 0 Default GPU clock 0.00mhz Default Mem clock 0.00mhz The drop down menu is also missing the fan settings I've run a few benchmarking utilities I use and they show I'm still oc'd

May 31, 2005, 07:23 AM	#6
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,758 (4.18/day) Thanks: 184 Thanked 10,208 Times in 3,157 Posts System Specs	ok .. google debugview and install it, leave it running while uninstalling and then installing atitool, paste its output here

Jun 2, 2005, 04:11 AM	#7
nvteleskier Join Date: May 2005 Posts: 5 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Uninstalled ATI Tools, saved settings, rebooted and reinstalled. Everything has been working. Nothing has changed, no new drivers, etc. If this pops up again I'll be back! Thanks for your help.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NVIDIA Quad-SLI vs. ATI Crossfire	W1zzard	Reviews	34	Jun 6, 2008 04:33 AM
Zalman VF1000 & RHS88	Frederik S	Reviews	24	Dec 24, 2007 10:38 AM
ATI Radeon HD 2900 XT	W1zzard	Reviews	174	Jun 3, 2007 08:54 AM
Artifact Detection problem.	flub97	ATITool	1	Aug 23, 2004 07:11 PM