ATI Tool 0.24 b10 and Catalyst 5.6 w/ CCC = no Temp. Monitor?

DoubleJ · Jun 11, 2005, 12:10 PM

Hi everyone,

I just updated my Catalsyt Driver. I was using 5.3 w/o CCC, now I'm using 5.6 w/ CCC. And now, after I updated the driver, ATITool doesn't show any temperature for my X800 XT.

What's wrong?

Thx in advance,
Micha

FatMaserati · Jun 11, 2005, 12:17 PM

Just use ATI Tool 0.24 proper release (non-beta) and see if that works.

DoubleJ · Jun 11, 2005, 12:19 PM

Quote:

Originally Posted by FatMaserati

Just use ATI Tool 0.24 proper release (non-beta) and see if that works.

It doesn't.

It didn't work with .23, so I installed .24. I didn't work with .24 so I installed the latest beta

But this is weird:

Quote:

2005-06-11 14:04:50 ATITool v0.24 Beta 10 started.
2005-06-11 14:04:50 Detected GPU Chip: R420 (4A4B), 16 Pipelines, 256 MB
2005-06-11 14:04:50 Temperature monitoring: LM63 detected

W1zzard · Jun 11, 2005, 12:33 PM

try uninstalling atitool, reboot, reinstall atitool 0.24. does this help?

you DID enable monitoring in the options?

DoubleJ · Jun 11, 2005, 03:35 PM

Quote:

Originally Posted by W1zzard

you DID enable monitoring in the options?

oh no... SHAME ON ME!!!
I didn't change anything at all in the options, looks like ATITool disabled this option itself?!

W1zzard · Jun 16, 2005, 04:44 PM

the default is that this option is disabled on new installations

DoubleJ · Jun 19, 2005, 09:58 PM

maybe... but what i wanted to say was: the option was enabled all the time. then the only thing i was doing was to install a new catalyst driver. i didn't touch any option in atitool. so it seems like the driver update disabled temp. monitoring....

W1zzard · Jun 19, 2005, 10:07 PM

ati's driver uninstall uninstall all application which start with ATI and remove all registry keys which start with ATI. i changed this for 0.24 final

ojaneka · Jun 20, 2005, 03:26 PM

Ati tool 0.24 doesn`t keep my fan overdrive SETTINGS. Need to re set them after reboot? Did`nt reinstall ati tool when chanced to 5.6 from 5.5...

win 64-bit
cat 5.6
X800Pro

Jun 11, 2005, 12:10 PM	#1
DoubleJ Join Date: Jun 2005 Posts: 5 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	ATI Tool 0.24 b10 and Catalyst 5.6 w/ CCC = no Temp. Monitor? Hi everyone, I just updated my Catalsyt Driver. I was using 5.3 w/o CCC, now I'm using 5.6 w/ CCC. And now, after I updated the driver, ATITool doesn't show any temperature for my X800 XT. What's wrong? Thx in advance, Micha

Jun 11, 2005, 12:17 PM	#2
FatMaserati Join Date: Dec 2004 Location: Perth, Western Australia Posts: 36 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	Just use ATI Tool 0.24 proper release (non-beta) and see if that works. __________________ X800 Pro @ 546.75/526.50 with 16 pipeline hard-mod

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

Jun 11, 2005, 12:33 PM	#4
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,870 (4.17/day) Thanks: 184 Thanked 10,453 Times in 3,219 Posts System Specs	try uninstalling atitool, reboot, reinstall atitool 0.24. does this help? you DID enable monitoring in the options?

Jun 16, 2005, 04:44 PM	#6
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,870 (4.17/day) Thanks: 184 Thanked 10,453 Times in 3,219 Posts System Specs	the default is that this option is disabled on new installations

Jun 19, 2005, 09:58 PM	#7
DoubleJ Join Date: Jun 2005 Posts: 5 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	maybe... but what i wanted to say was: the option was enabled all the time. then the only thing i was doing was to install a new catalyst driver. i didn't touch any option in atitool. so it seems like the driver update disabled temp. monitoring....

Jun 19, 2005, 10:07 PM	#8
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,870 (4.17/day) Thanks: 184 Thanked 10,453 Times in 3,219 Posts System Specs	ati's driver uninstall uninstall all application which start with ATI and remove all registry keys which start with ATI. i changed this for 0.24 final

Jun 20, 2005, 03:26 PM	#9
ojaneka Join Date: Oct 2004 Location: Hell`s Posts: 28 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	Ati tool 0.24 doesn`t keep my fan overdrive SETTINGS. Need to re set them after reboot? Did`nt reinstall ati tool when chanced to 5.6 from 5.5... win 64-bit cat 5.6 X800Pro Last edited by ojaneka; Jun 20, 2005 at 04:56 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)