my ninja

klva80 · Apr 4, 2008, 07:18 AM

Hi guys me again

so far cuted out the hd cage, next in mind cutting a hole for the 120mm floor fan her a are some pics any suggestions are welcome

mon74 · Apr 4, 2008, 07:40 PM

Hi Bro!

Suggestion 1.- clean up that room.
Suggestion 2.- Buy new case.

Gam'ster · Apr 4, 2008, 07:44 PM

Quote:

Originally Posted by mon74

Hi Bro!

Suggestion 1.- clean up that room.
Suggestion 2.- Buy new case.

So constructive

, back on topic as long as work is going as planned then all is good

, what look you going for ? and are the boxes in the back ground new hardware ? if so what u got

Cheers
Gam

mon74 · Apr 4, 2008, 07:53 PM

Klva80 is my little brother, I'm just messing with him...

Quote:

Originally Posted by Gam'ster

So constructive

, back on topic as long as work is going as planned then all is good

, what look you going for ? and are the boxes in the back ground new hardware ? if so what u got

Cheers
Gam

klva80 · Apr 5, 2008, 05:46 AM

Ok so far started cutting a blow hole for the vid card

erocker · Apr 5, 2008, 05:48 AM

You should use a hole saw for your fans. It's faster and very clean looking.

*Be sure to lay down some masking tape first too!

klva80 · Apr 5, 2008, 05:56 AM

ya i know but i dont have one at the moment its 10 pm so i'll wait the morning to go get one

klva80 · Apr 5, 2008, 05:57 AM

naa thats my bro current hardware mine is under specs

Quote:

Originally Posted by Gam'ster

So constructive

, back on topic as long as work is going as planned then all is good

, what look you going for ? and are the boxes in the back ground new hardware ? if so what u got

Cheers
Gam

klva80 · Apr 5, 2008, 10:49 PM

ok so far

MKmods · Apr 5, 2008, 11:18 PM

It aint pretty but gets the job done. That must have taken a lot of holes.
( I remember before I had the hole saws and fancy tools doing the same thing, good job)

I tried a can opener once, didnt work so well, lol

philbrown23 · Apr 6, 2008, 12:09 AM

what did you do that with??? sand the crap out of it it will look alot better.

jbunch07 · Apr 6, 2008, 12:11 AM

dude did you use a plasma cutter on that or what?
jk bro!

klva80 · Apr 6, 2008, 12:31 AM

ok went to my local shop and got some grinding bits :P

MKmods · Apr 6, 2008, 12:39 AM

Better. What other mods are you planning?

klva80 · Apr 6, 2008, 12:49 AM

cutting the front grill to let the low rpm case fan breath better (already cutted) repaint the hole interior (this time i'm going to apply 2 layers of primer) and still thinking

front grill cut images coming

klva80 · Apr 6, 2008, 01:01 AM

philbrown23 · Apr 6, 2008, 01:22 AM

what size fan are you using on that??

klva80 · Apr 6, 2008, 01:27 AM

all fans in my case are 120mm except for the side panel its a 80mm

MKmods · Apr 6, 2008, 01:31 AM

hey klva where are you located?

klva80 · Apr 6, 2008, 01:32 AM

i'm from ensenada, baja california. thats Mexico

MKmods · Apr 6, 2008, 01:37 AM

I lived in MICHOACAN for a couple years..the reason I ask is I am getting a new set of cutters

I will send you my older pair if its ok.
(PM me ur address(direction))

klva80 · Apr 6, 2008, 01:48 AM

that would be awesome, so did you learn Spanish ?

MKmods · Apr 6, 2008, 01:49 AM

I can speak pretty good, not so much writing.
(Im fluent in all the Bad words)

Cold Storm · Apr 6, 2008, 01:52 AM

Quote:

Originally Posted by MKmods

I can speak pretty good, not so much writing.
(Im fluent in all the Bad words)

lol mk! Dad went to Brezil for work and learned a few words him self... lol.... Klva, its looking to be a good mod! glad this gives me the Subscribe to the tread! Best of luck on it all!

klva80 · Apr 6, 2008, 02:38 AM

LOL always the bad words i have a friend from Hawaii and thats the first thing he learned :P

Apr 4, 2008, 07:18 AM	#1
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	my ninja Hi guys me again so far cuted out the hd cage, next in mind cutting a hole for the 120mm floor fan her a are some pics any suggestions are welcome __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

System Name:	Tyni Monster
Processor:	Core @ Duo e6550 @ 3.5 ghz
Motherboard:	Bisotar TP35D2-a7 ZAlman Chipset cooler
Cooling:	coolermaster hyper tx2
Memory:	ddr 800 kinsgton value @ 1000 mHz
Video Card:	Radeon 4850 coming in mail
Hard Disk:	WD Caviar 500 sata 2.0
Optical Drive:	lg 22x dvd burner Sata
CRT/LCD Model:	Acer AL2216W
Case:	Raidmax Ninja black
Sound Card:	Azalia
PSU:	Zalman 460
Software:	Win 7 X64

Apr 4, 2008, 07:40 PM	#2
mon74 Join Date: Nov 2006 Location: Ensenada, Mexico Posts: 135 (0.06/day) Thanks: 39 Thanked 15 Times in 15 Posts System Specs	Suggestions... Hi Bro! Suggestion 1.- clean up that room. Suggestion 2.- Buy new case.

Processor:	Athlon X2 3800 @ 2.8 Ghz w/Zalman CNPS 9500 LED
Motherboard:	MSI K8N Neo4-F
Cooling:	Fans: 2 120mm, 1 80mm, HD cooler all w/Tt fan controller
Memory:	Mushkin blue series DDR400 @ DDR466
Video Card:	Visiontek HD4850 512 Mb w/ Zalman VF-900
Hard Disk:	WD SATA 320 Gb / Hitachi Deskstar 82 Gb
Optical Drive:	LG DVD Burner
CRT/LCD Model:	KDS 19" Widescreen LCD
Case:	RAIDMAX SAGITTA Modded to Red lighting
Sound Card:	Onboard
PSU:	Zalman 600 Watts ZM600-HP
Software:	Win XP, Vista32, Ubuntu

System Name:	Toshiba L350
Processor:	AMD QL-65
Motherboard:	Toshiba 780G/SB700
Cooling:	Laptop
Memory:	3GB
Video Card:	ATI HD3000
Hard Disk:	250GB
Optical Drive:	DVD Rw
CRT/LCD Model:	17" Widescreen
Case:	Black/Carbon effect
Sound Card:	OnBoard
PSU:	Brick
Software:	WIN7

Apr 5, 2008, 05:46 AM	#5
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	Ok so far started cutting a blow hole for the vid card __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

Apr 5, 2008, 05:48 AM	#6
erocker Senior Moderator Join Date: Jul 2006 Location: Milwaukee, WI. Posts: 31,919 (12.77/day) Thanks: 2,783 Thanked 12,286 Times in 7,820 Posts System Specs	You should use a hole saw for your fans. It's faster and very clean looking. Be sure to lay down some masking tape first too! Last edited by erocker; Apr 5, 2008 at 05:58 AM.*

Processor:	Intel i7 3770K @ 4.6ghz 1.256v
Motherboard:	Asus Maximus V Formula
Cooling:	Water
Memory:	2x4gb Patriot Viper 2133mhz 10-11-10-25 2T 1.55v
Video Card:	Sapphire HD 7970 1125/1575 1.14v
Hard Disk:	Crucial M4 128Gb / Corsair Force 3 120Gb / Samsung 240Gb / 2Tb Seagate
Optical Drive:	None
CRT/LCD Model:	Acheiva Shimian 27" IPS 2560x1440
Case:	Corsair 500R White
Sound Card:	Onboard
PSU:	NZXT Hale90 1Kw
Software:	Windows 8 x64

Apr 5, 2008, 05:56 AM	#7
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	ya i know but i dont have one at the moment its 10 pm so i'll wait the morning to go get one __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

Apr 5, 2008, 10:49 PM	#9
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	ok so far __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

Apr 5, 2008, 11:18 PM	#10
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.46/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	It aint pretty but gets the job done. That must have taken a lot of holes. ( I remember before I had the hole saws and fancy tools doing the same thing, good job) I tried a can opener once, didnt work so well, lol __________________ Buy tin snips FIRST! Last edited by MKmods; Apr 6, 2008 at 12:53 AM.

System Name:	Crossflow III
Processor:	AMD 965 (4.04Ghz)
Motherboard:	Asus Crosshair III
Cooling:	Air
Memory:	4 gigs Mushkin 7-7-7-20@1T
Video Card:	single 9800GT
Hard Disk:	Raptor 150's in Raid0
Optical Drive:	Plextor
CRT/LCD Model:	LG Flatron 24"
Case:	Custom
Sound Card:	AuzenTech X-Raider W/OP637
PSU:	Custom modded Corsair 750HX
Software:	Win 7 64/Solaris Utility
Benchmarks:	3DMark06--21963 so far

Apr 6, 2008, 12:09 AM	#11
philbrown23 Join Date: Dec 2007 Location: vermont Posts: 1,050 (0.53/day) Thanks: 197 Thanked 150 Times in 133 Posts System Specs	what did you do that with??? sand the crap out of it it will look alot better. __________________ CPU-Z validation sig pics temporarily blocked

System Name:	Dominator
Processor:	INTEL C2Q Q6600 FTW!!
Motherboard:	ASUS P5Q-E!!!
Cooling:	TEC cooled cpu, everything else is under water :D
Memory:	4GB CELL SHOCK D9GMH 1066MHZ/4GB CRUCIAL REDS
Video Card:	4850 (VT)/ 4850 IN CROSSFIRE!
Hard Disk:	western digital= 1X 250GB, 1X 500GB, IDE 160GB (BOOT DRIVE ONLY). SEAGATE FREE AGENT 500GB EHDD
Optical Drive:	2X dvdrw w/lightscribe
CRT/LCD Model:	viewsonic 19" hd widescreen
Case:	ROCKETFISH FOR NOW :(
Sound Card:	ONBOARD WORKS JUST FINE FOR ME :p
PSU:	ULTRA X3 1KW MODULAR
Software:	win vista ultimate 64 TWEAKED!!!
Benchmarks:	http://valid.x86-secret.com/show_oc.php?id=434759 3dm06: http://service.futuremark.com/compare?3dm0

Apr 6, 2008, 12:11 AM	#12
jbunch07 Join Date: Feb 2008 Location: Chattanooga,TN Posts: 3,738 (1.95/day) Thanks: 499 Thanked 621 Times in 474 Posts System Specs	dude did you use a plasma cutter on that or what? jk bro!

Processor:	i5-2500k
Motherboard:	ASRock z68 pro3-m
Cooling:	Corsair A70
Memory:	Kingston HyperX 8GB 2 x 4GB 1600mhz
Hard Disk:	OCZ Agility3 60GB(boot) 2x320GB Raid0(storage)
Optical Drive:	LG Blue Ray
CRT/LCD Model:	Samsung 24" 1920x1200
Case:	Custom
PSU:	PC Power and Cooling 750w
Software:	Win 7 x64

Apr 6, 2008, 12:31 AM	#13
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	sanded ok went to my local shop and got some grinding bits :P __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

Apr 6, 2008, 12:39 AM	#14
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.46/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	Better. What other mods are you planning? __________________ Buy tin snips FIRST!

Apr 6, 2008, 12:49 AM	#15
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	cutting the front grill to let the low rpm case fan breath better (already cutted) repaint the hole interior (this time i'm going to apply 2 layers of primer) and still thinking front grill cut images coming __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

Apr 6, 2008, 01:01 AM	#16
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	front grill cutted __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

Apr 6, 2008, 01:22 AM	#17
philbrown23 Join Date: Dec 2007 Location: vermont Posts: 1,050 (0.53/day) Thanks: 197 Thanked 150 Times in 133 Posts System Specs	what size fan are you using on that?? __________________ CPU-Z validation sig pics temporarily blocked

Apr 6, 2008, 01:27 AM	#18
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	fans all fans in my case are 120mm except for the side panel its a 80mm __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

Apr 6, 2008, 01:31 AM	#19
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.46/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	hey klva where are you located? __________________ Buy tin snips FIRST!

Apr 6, 2008, 01:32 AM	#20
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	i'm from ensenada, baja california. thats Mexico __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

Apr 6, 2008, 01:37 AM	#21
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.46/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	I lived in MICHOACAN for a couple years..the reason I ask is I am getting a new set of cutters I will send you my older pair if its ok. (PM me ur address(direction)) __________________ Buy tin snips FIRST!

Apr 6, 2008, 01:48 AM	#22
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	that would be awesome, so did you learn Spanish ? __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

Apr 6, 2008, 01:49 AM	#23
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.46/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	I can speak pretty good, not so much writing. (Im fluent in all the Bad words) __________________ Buy tin snips FIRST!

System Name:	Haru
Processor:	i7 3770k @ 4.5ghz
Motherboard:	Biostar Tz77xme4
Cooling:	Koolance C370si loop
Memory:	8gb G. Skill Trident X 2400mhz at 10-11-11-28
Video Card:	XFX Double D 7950 / Zotac 620 for physx
Hard Disk:	Samsung 830 128gb (os)Muskin Chronos 120gb, Pyro 120gb
Optical Drive:	Asus Blu-Ray (SBW-06C1S-U)
CRT/LCD Model:	Testing: Vizio 37" lcd tv / Viewsonic VX2450WM-LED 24" & Hanns G 28"
Case:	Cooler Master Cosmos II
Sound Card:	Auzentech X-fi Forte 7.1 Opamp modded
PSU:	Silverstone Strider Plus 1000w pp05 cables
Software:	Win7 Pro64
Benchmarks:	i5 750 4.62ghz pi runs // Evga FTW p55

Apr 6, 2008, 02:38 AM	#25
klva80 Join Date: Jul 2007 Posts: 126 (0.06/day) Thanks: 4 Thanked 6 Times in 6 Posts System Specs	LOL always the bad words i have a friend from Hawaii and thats the first thing he learned :P __________________ [U]core 2 Duo @ 3.5 GhZ 4 Gb Kingston Value Biostar TP35D2-A7 R4850 Coming In Mail My Projects my project log My Mods

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
scyte ninja copper help	Azazel	Overclocking & Cooling	10	Feb 6, 2008 12:35 PM
Vizo Ninja II Notebook Cooler	Darksaber	Reviews	0	Dec 1, 2007 01:47 PM
Scythe Ninja Mini CPU Cooler	malware	News	7	Sep 13, 2007 04:12 AM
Scythe Katana or Ninja	bruins004	Overclocking & Cooling	16	Mar 28, 2007 01:38 AM
WTB BIG hsf like an Infinity or Ninja. USA	Lazzer408	Buy/Sell/Trade/Giveaway Forum	4	Feb 5, 2007 06:55 PM