Totally confused X800 GTO or PRO

[cowdude]

Everest tells me I have a Saphire X800 GTO AGP 256mb
ATI tool reads
catylyst ver. pre 2.4
Device ID 554F
chip type R430
memory size 256
memory bus width 256 bit
active pipes 12
Def. GPU clk 400.00 mhz
Def. mem clk. 490.00 mhz
config die fuses 0xFFFFFFFF
config substrate fuses 0xFFFFFF9F
config rom fuses 0xA61
GB pipe select 0x2724

I follow the hex editor instructions and I see lines 00000060 - 00000080
I have no 070 and this is an original saved bios file from my card.
Hex editor says it is a PCIE and I haven't connected the power cable.
It is an AGP
Last but not least I was installing a new AC ATI silncer and I see ATI X800 PRO on the chip.
It is the long red board with Saphire logo. reply for any additional info.
I don't know what card I have, so I am afraid to mod the bios.

Thanks in advance

[erocker]

That is an unlockable card you have there. You'll have to search this thread: http://forums.techpowerup.com/showthread.php?t=10955 for the proper bios to flash to it. Oh, and it's says PCI-e because ATi uses a Rialto agp chip on the card to convert it from pci-e.

[cowdude]

thnx erocker, btw nice rig. I use flex loom on my PSU cables. it makes them look cool and it comes in many colors too.