My Rocketfish Mod

Bytor · Jun 19, 2008, 02:51 AM

I know this is not the first and won't be the last Rocketfish mod on this forum, but this one is mine...

Starting with a parts list of items used in this mod:

Rocketfish case (Best Buy)
Sheet of 3/32" plexiglass (Lowes)
Wire mesh desk organizer (wal-mart)
4- 6 oz. Vulcanized rubber Hockey Pucks (playit again sports)
asst. of 1/4" screws, nuts and flat washers (Lowes)
A.C. Ryan 360 Radgrill (Performance PC)
U-Channel for the holes (MNPCTECH)

List of computer parts that will be installed in the case:

AMD Phenom 9850 BE
Asus M3A32-MVP MB
3-Visiontek HD3870 video cards
4 gigs of Crucial Balistix Tracers PC2-8500
WD 640 gig AAKS HDD
700 watt PSU

Water Cooling Gear:

Swiftech MCP355 & MCP350 pumps both w/Petra's tops
Black Ice Extreme 240 & 360 Radiators
D-Tek Fuzion V1 CPU Block
3- Swiftech MCW60 GPU Blocks
5- 141 CFM High Speed Delta Fans
Sunbeam fan controller

With Plixi and vent hole w/wire mesh

Vent Hole on MB side of case w/wire mesh

Hockey Pucks (I know most of you can figure out what I'm using these for eh!)

Power tool of choice for making great holes..

Yep they make great feet for a case....Talk about a solid stance..
I also needed to raise the case a little so the pucks give me that. I will have the 240 rad. sucking air from under the case.

Well thats all I have done for now... Will keep updating till its complete..

Top radiator hole cut. My tool of choice was a dremel with a cut off wheel.

Bytor · Jun 19, 2008, 02:53 AM

Cut the bottom hole for the BIX 240 radiator.

The case mod is almost complete now. I just installed the U-Channel I ordered from MNPCTECH (Thanks Bill) and man this stuff is great to work with..

These pic's show the window and mesh screens installed.

I decided to paint the inside of the fish with semi-gloss black spray bomb.

Bytor · Jun 19, 2008, 02:54 AM

Up and running...

Well here she is...

I'm not real happy with the route of the tubing, but have a order from Jab-Tech due in any day and may change it up.
Ok I changed my loop around and this seems to work much better. I used alot of the space in this huge case to run tubing as you can see.

These are so sexy I had to post a pic. of all 3 together ...

My new 24" monitor with my setup..

a111087 · Jun 19, 2008, 03:30 AM

ok, so the rad will suck air from bottom and you will have a case full of hot air?

Bytor · Jun 19, 2008, 03:34 AM

Quote:

Originally Posted by a111087

ok, so the rad will suck air from bottom and you will have a case full of hot air?

The 360 rad. will be doing the same from the top. Thats the reason for the vent holes on both sides of the case...To let the air flow out..
Not to worry... With 5 141 CFM delta fans blowing the doors off the case the warm air will leave...

a111087 · Jun 19, 2008, 03:37 AM

oh, i see, now it is an excellent ventilation

Bytor · Jun 19, 2008, 03:41 AM

Plus both 120mm case fans will be sucking air out of the case..

Cold Storm · Jun 19, 2008, 03:58 AM

Dang man, I can't wait to see it all done! Going to be one sweet case!

EnergyFX · Jun 19, 2008, 07:40 AM

Nice! I've been toying with the idea of getting one of these cases. Looking forward to seeing how your build turns out.

Bytor · Jun 20, 2008, 11:07 PM

UPDATE!!!

New pic's added of top radiator hole...

JrRacinFan · Jun 20, 2008, 11:31 PM

**subscribed**
Looks good so far.
Can I take some of your ideas if you don't mind Bytor?

intel igent · Jun 20, 2008, 11:35 PM

very creative Bytor!

i like the direction your'e headed in

paybackdaman · Jun 20, 2008, 11:38 PM

dude. I love the feet idea....i'm jealous I didn't think of this. I have like 40 pucks lying around from various games and a few that I have bought....I think I may be stealing your idea....

Bytor · Jun 21, 2008, 12:22 AM

Feel free to use any idea you like....

Thanks for all the kind words everyone... More to come...

Bytor · Jun 22, 2008, 05:06 PM

UPDATE!!!!

Bottom rad. hole pic's added.

Cold Storm · Jun 22, 2008, 05:11 PM

That looks pretty nice man! Can't wait to see that bad boy finished!

newconroer · Jun 22, 2008, 05:56 PM

Three cheers for the pucks.

And hey, andbody that can a hole in solid vulcanized rubber is cool in my book.

t_ski · Jun 23, 2008, 01:23 AM

The rad and fans on the bottom of the case are going to be inside, right?

kenkickr · Jun 23, 2008, 01:50 AM

Looking sweet Bytor(Awesome your a Rush fan)!!! I really like the mod your doing on top for the radiator, I was planning on doing something like that later to my CM690.

JFYI: Have you seen the video of Geddy and Alex playing YYZ with Foo Fighters? Awesome if you have the time: http://www.youtube.com/watch?v=DT7bu...eature=related

Bytor · Jun 23, 2008, 02:26 AM

Quote:

Originally Posted by kenkickr

Looking sweet Bytor(Awesome your a Rush fan)!!! I really like the mod your doing on top for the radiator, I was planning on doing something like that later to my CM690.

JFYI: Have you seen the video of Geddy and Alex playing YYZ with Foo Fighters? Awesome if you have the time: http://www.youtube.com/watch?v=DT7bu...eature=related

Oh yeah seen that a while ago.. Great song...

Rush FTW.....

Bytor · Jun 23, 2008, 02:28 AM

Quote:

Originally Posted by t_ski

The rad and fans on the bottom of the case are going to be inside, right?

Yes everything will be inside on this build. Fans on both rads. will be pulling outside air through the rads.

Bytor · Jun 23, 2008, 08:45 PM

UPDATE!!!

The case is almost complete...

MKmods · Jun 23, 2008, 09:21 PM

I like how you made the holes offset on the feet allowing them to be brought out to make the tall case more stable or in for a cleaner look.

Bytor · Jun 23, 2008, 09:43 PM

Quote:

Originally Posted by MKmods

I like how you made the holes offset on the feet allowing them to be brought out to make the tall case more stable or in for a cleaner look.

Thanks... More stable and to clear the bottom rad. mount screws and gives me 1" clearence for the rad. air intake. The stock feet are very thin..

Bytor · Jul 3, 2008, 02:07 AM

UPDATE!!!

Painted inside of case... Pic's added

Jun 19, 2008, 02:51 AM	#1
Bytor Join Date: Jun 2007 Posts: 979 (0.45/day) Thanks: 130 Thanked 109 Times in 103 Posts System Specs	"The Dark Spider" I know this is not the first and won't be the last Rocketfish mod on this forum, but this one is mine... Starting with a parts list of items used in this mod: Rocketfish case (Best Buy) Sheet of 3/32" plexiglass (Lowes) Wire mesh desk organizer (wal-mart) 4- 6 oz. Vulcanized rubber Hockey Pucks (playit again sports) asst. of 1/4" screws, nuts and flat washers (Lowes) A.C. Ryan 360 Radgrill (Performance PC) U-Channel for the holes (MNPCTECH) List of computer parts that will be installed in the case: AMD Phenom 9850 BE Asus M3A32-MVP MB 3-Visiontek HD3870 video cards 4 gigs of Crucial Balistix Tracers PC2-8500 WD 640 gig AAKS HDD 700 watt PSU Water Cooling Gear: Swiftech MCP355 & MCP350 pumps both w/Petra's tops Black Ice Extreme 240 & 360 Radiators D-Tek Fuzion V1 CPU Block 3- Swiftech MCW60 GPU Blocks 5- 141 CFM High Speed Delta Fans Sunbeam fan controller With Plixi and vent hole w/wire mesh Vent Hole on MB side of case w/wire mesh Hockey Pucks (I know most of you can figure out what I'm using these for eh!) Power tool of choice for making great holes.. Yep they make great feet for a case....Talk about a solid stance.. I also needed to raise the case a little so the pucks give me that. I will have the 240 rad. sucking air from under the case. Well thats all I have done for now... Will keep updating till its complete.. Top radiator hole cut. My tool of choice was a dremel with a cut off wheel. __________________ Canon 40d Gripped ~ 10-22mm UWA ~ 24-105mm L ~ 50mm f1.8 ~ 70-200mm f/2.8 IS L ~ 430ex II Speedlite All the World's Indeed a Stage, We are Merely Players, Performers and Portrayers!! *3DMark06 23397 Super PI 9.297 sec** Last edited by Bytor; Jul 6, 2008 at 03:31 AM. Reason: Update

System Name:	"The Dark Spider"
Processor:	AMD Phenom 9850 @ 3.0
Motherboard:	Asus M3A79-T
Cooling:	Water: CPU and GPU's, 2 pumps, 2 BIX Rads, D-Tek Fuzion v1, 2 Swiftech MCW60
Memory:	4 gigs Crucial Balistix Tracers (1066 @ 1256)
Video Card:	Sapphire 4870x2
Hard Disk:	WD SATA 640 Gig HDD
CRT/LCD Model:	Acer 24" beast...
Case:	Modded Rocketfish
Sound Card:	Onboard (only use head phones)
PSU:	700 watt
Software:	a bunch
Benchmarks:	3D Mark 06: 9859 on 2-X1950 pro's Xfire 3D Mark 06: 12794 on 1-3870 3D Mark 06: 16484 Xfire

Jun 19, 2008, 02:53 AM	#2
Bytor Join Date: Jun 2007 Posts: 979 (0.45/day) Thanks: 130 Thanked 109 Times in 103 Posts System Specs	Cut the bottom hole for the BIX 240 radiator. The case mod is almost complete now. I just installed the U-Channel I ordered from MNPCTECH (Thanks Bill) and man this stuff is great to work with.. These pic's show the window and mesh screens installed. I decided to paint the inside of the fish with semi-gloss black spray bomb. __________________ Canon 40d Gripped ~ 10-22mm UWA ~ 24-105mm L ~ 50mm f1.8 ~ 70-200mm f/2.8 IS L ~ 430ex II Speedlite All the World's Indeed a Stage, We are Merely Players, Performers and Portrayers!! *3DMark06 23397 Super PI 9.297 sec** Last edited by Bytor; Jul 3, 2008 at 02:06 AM.

System Name:	"The Dark Spider"
Processor:	AMD Phenom 9850 @ 3.0
Motherboard:	Asus M3A79-T
Cooling:	Water: CPU and GPU's, 2 pumps, 2 BIX Rads, D-Tek Fuzion v1, 2 Swiftech MCW60
Memory:	4 gigs Crucial Balistix Tracers (1066 @ 1256)
Video Card:	Sapphire 4870x2
Hard Disk:	WD SATA 640 Gig HDD
CRT/LCD Model:	Acer 24" beast...
Case:	Modded Rocketfish
Sound Card:	Onboard (only use head phones)
PSU:	700 watt
Software:	a bunch
Benchmarks:	3D Mark 06: 9859 on 2-X1950 pro's Xfire 3D Mark 06: 12794 on 1-3870 3D Mark 06: 16484 Xfire

Jun 19, 2008, 02:54 AM	#3
Bytor Join Date: Jun 2007 Posts: 979 (0.45/day) Thanks: 130 Thanked 109 Times in 103 Posts System Specs	Up and running... Well here she is... I'm not real happy with the route of the tubing, but have a order from Jab-Tech due in any day and may change it up. Ok I changed my loop around and this seems to work much better. I used alot of the space in this huge case to run tubing as you can see. These are so sexy I had to post a pic. of all 3 together ... My new 24" monitor with my setup.. __________________ Canon 40d Gripped ~ 10-22mm UWA ~ 24-105mm L ~ 50mm f1.8 ~ 70-200mm f/2.8 IS L ~ 430ex II Speedlite All the World's Indeed a Stage, We are Merely Players, Performers and Portrayers!! *3DMark06 23397 Super PI 9.297 sec** Last edited by Bytor; Jul 12, 2008 at 07:09 PM.

Jun 19, 2008, 03:30 AM	#4
a111087 Join Date: Apr 2007 Location: US Posts: 2,521 (1.11/day) Thanks: 240 Thanked 190 Times in 157 Posts System Specs	ok, so the rad will suck air from bottom and you will have a case full of hot air? __________________

Processor:	Intel Q9400
Motherboard:	asus p5q-pro
Cooling:	Ultra120
Memory:	6GB ddr2
Video Card:	NVS 290
Hard Disk:	3TB + 1.5TB
Optical Drive:	ASUS DVD burner
CRT/LCD Model:	Samsung F2380
Case:	Silverstone Fortress FT02B
Sound Card:	Creative X-Fi
PSU:	750W PC P&C
Software:	win 7 ultimate 64bit

Jun 19, 2008, 03:37 AM	#6
a111087 Join Date: Apr 2007 Location: US Posts: 2,521 (1.11/day) Thanks: 240 Thanked 190 Times in 157 Posts System Specs	oh, i see, now it is an excellent ventilation __________________

Jun 19, 2008, 03:41 AM	#7
Bytor Join Date: Jun 2007 Posts: 979 (0.45/day) Thanks: 130 Thanked 109 Times in 103 Posts System Specs	Plus both 120mm case fans will be sucking air out of the case.. __________________ Canon 40d Gripped ~ 10-22mm UWA ~ 24-105mm L ~ 50mm f1.8 ~ 70-200mm f/2.8 IS L ~ 430ex II Speedlite All the World's Indeed a Stage, We are Merely Players, Performers and Portrayers!! *3DMark06 23397 Super PI 9.297 sec**

Jun 19, 2008, 03:58 AM	#8
Cold Storm Battosai Join Date: Oct 2007 Location: In a library somewhere on this earth Posts: 10,566 (5.08/day) Thanks: 4,245 Thanked 3,051 Times in 2,495 Posts System Specs	Dang man, I can't wait to see it all done! Going to be one sweet case! __________________ The only way success is before work, is in the dictionary Support for the mind. Support for your hardware

System Name:	Haru
Processor:	i7 3770k @ 4.5ghz
Motherboard:	Biostar Tz77xme4
Cooling:	Koolance C370si loop
Memory:	8gb G. Skill Trident X 2400mhz at 10-11-11-28
Video Card:	XFX Double D 7950 / Zotac 620 for physx
Hard Disk:	Samsung 830 128gb (os)Muskin Chronos 120gb, Pyro 120gb
Optical Drive:	Asus Blu-Ray (SBW-06C1S-U)
CRT/LCD Model:	Testing: Vizio 37" lcd tv / Viewsonic VX2450WM-LED 24" & Hanns G 28"
Case:	Cooler Master Cosmos II
Sound Card:	Auzentech X-fi Forte 7.1 Opamp modded
PSU:	Silverstone Strider Plus 1000w pp05 cables
Software:	Win7 Pro64
Benchmarks:	i5 750 4.62ghz pi runs // Evga FTW p55

Jun 19, 2008, 07:40 AM	#9
EnergyFX Join Date: Nov 2007 Location: Annapolis, MD Posts: 1,396 (0.69/day) Thanks: 477 Thanked 350 Times in 237 Posts System Specs	Nice! I've been toying with the idea of getting one of these cases. Looking forward to seeing how your build turns out. __________________ Feedback/Rep: Heat -- eBay There is an elegant solution for every problem... and sometimes elegance comes in the form of a very large hammer.

System Name:	n.audBl
Processor:	E8500 @ 3.80GHz
Motherboard:	ASUS Striker Extreme
Cooling:	Full liquid (everything except power supply)
Memory:	4Gb OCZ DDR2 PC9600
Video Card:	Dual EVGA GTX 280 SSC Edition
Hard Disk:	Dual WD Raptor in RAID 0 (300Gb), Dual WD 1Tb Cavair in RAID 1
Optical Drive:	ASUS CD/DVD Burner
CRT/LCD Model:	Dell 2407 24" HD+ Widescreen
Case:	Theraltake Tai-Chi
Sound Card:	X-Fi Fata1ty (bleh!)
PSU:	Ultra X3 1000W
Software:	Win 7 64bit

Jun 20, 2008, 11:07 PM	#10
Bytor Join Date: Jun 2007 Posts: 979 (0.45/day) Thanks: 130 Thanked 109 Times in 103 Posts System Specs	UPDATE!!! New pic's added of top radiator hole... __________________ Canon 40d Gripped ~ 10-22mm UWA ~ 24-105mm L ~ 50mm f1.8 ~ 70-200mm f/2.8 IS L ~ 430ex II Speedlite All the World's Indeed a Stage, We are Merely Players, Performers and Portrayers!! *3DMark06 23397 Super PI 9.297 sec**

Jun 20, 2008, 11:31 PM	#11
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.05/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	subscribed Looks good so far. Can I take some of your ideas if you don't mind Bytor? __________________ Graphics Artists United™ Request Thread Low Cache CPU Club Solaris Utility DVD 3.0 DanishDevil's Logitech Soundroom TPU Video Gallery Sciencemark Revisited

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

Jun 20, 2008, 11:35 PM	#12
intel igent Banned Join Date: Jun 2005 Location: Toronto, Canada Posts: 3,242 (1.10/day) Thanks: 453 Thanked 445 Times in 413 Posts System Specs	very creative Bytor! i like the direction your'e headed in

System Name:	old school / new school
Processor:	3.0e C0 @ 3.6 / e5200
Motherboard:	p4p800e-dlx / p5q-DLX
Cooling:	custom water see sig / air
Memory:	2x1g oczPC4000EbPl / 2x2g ocz2rpr1066
Video Card:	3850AGP / 4890vaporX
Hard Disk:	36g raptor+120g wd / wd 1001fals 1tb
Optical Drive:	LG x 2 / LG BluRay
CRT/LCD Model:	BenQ / sharpAQUOS LC-37D64U
Case:	modded antec plusview / generic
Sound Card:	audigy 2zs / ASUS Xonar HDAV1.3
PSU:	fan/cable modded powerstream 520 / OCZ 700mxsp
Software:	Xp pro SP2 / VISTA ultimate OEM

Jun 20, 2008, 11:38 PM	#13
paybackdaman Join Date: Apr 2008 Location: Clermont, FL Posts: 397 (0.21/day) Thanks: 62 Thanked 46 Times in 40 Posts System Specs	dude. I love the feet idea....i'm jealous I didn't think of this. I have like 40 pucks lying around from various games and a few that I have bought....I think I may be stealing your idea.... __________________ "I get what I get all despite you, I get what I get just to spite you." -The Raconteurs

System Name:	Fixxer Upper
Processor:	Intel Core2Quad Q9450 @ 2.66Ghz
Motherboard:	ASUS Rampage Formula x48
Cooling:	Xigmatec 120mm Rifle Cooler
Memory:	2 GB (2 x 1 GB) DDR2-1066 OCZ Reaper
Video Card:	XFX HD4890 1GB DDR5 CF w/ XFX HD4850 1GB DDR3
Hard Disk:	Western Digital 320 Caviar in Raid 0, Samsung Spingpoint F1 500GB
Optical Drive:	LG SATA drive
CRT/LCD Model:	LG 22" (L226WTQ)
Case:	Silverstone TJ09
Sound Card:	Supreme FX II w/ Logitech G51 5.1
PSU:	BFG 1000W Modular PSU
Software:	Windows 7 Ultimate 64-bit
Benchmarks:	7.7 in Windows 7

Jun 21, 2008, 12:22 AM	#14
Bytor Join Date: Jun 2007 Posts: 979 (0.45/day) Thanks: 130 Thanked 109 Times in 103 Posts System Specs	Feel free to use any idea you like.... Thanks for all the kind words everyone... More to come... __________________ Canon 40d Gripped ~ 10-22mm UWA ~ 24-105mm L ~ 50mm f1.8 ~ 70-200mm f/2.8 IS L ~ 430ex II Speedlite All the World's Indeed a Stage, We are Merely Players, Performers and Portrayers!! *3DMark06 23397 Super PI 9.297 sec**

Jun 22, 2008, 05:06 PM	#15
Bytor Join Date: Jun 2007 Posts: 979 (0.45/day) Thanks: 130 Thanked 109 Times in 103 Posts System Specs	UPDATE!!!! Bottom rad. hole pic's added. __________________ Canon 40d Gripped ~ 10-22mm UWA ~ 24-105mm L ~ 50mm f1.8 ~ 70-200mm f/2.8 IS L ~ 430ex II Speedlite All the World's Indeed a Stage, We are Merely Players, Performers and Portrayers!! *3DMark06 23397 Super PI 9.297 sec**

Jun 22, 2008, 05:11 PM	#16
Cold Storm Battosai Join Date: Oct 2007 Location: In a library somewhere on this earth Posts: 10,566 (5.08/day) Thanks: 4,245 Thanked 3,051 Times in 2,495 Posts System Specs	That looks pretty nice man! Can't wait to see that bad boy finished! __________________ The only way success is before work, is in the dictionary Support for the mind. Support for your hardware

Jun 22, 2008, 05:56 PM	#17
newconroer Join Date: Jun 2007 Posts: 2,271 (1.04/day) Thanks: 101 Thanked 232 Times in 195 Posts System Specs	Three cheers for the pucks. And hey, andbody that can a hole in solid vulcanized rubber is cool in my book. __________________ Awsome game I wish i could get it but parent are fags and they dont't let me get M games. Maybe if: You didn't call your parents fags You didn't call yourself "hacker" on the internet You learned to spell "awesome" and "assassin" they might think you are mature enough to get the game. -Davidelmo

System Name:	Medusa
Processor:	i7 2600k @4.8ghz
Motherboard:	Asus P8P67 Deluxe
Cooling:	Noctua NH-L12
Memory:	8gb Corsair XMS DDR3 @1600mhz
Video Card:	GTX 680 SLI
Hard Disk:	Crucial C300 256 SSD
Optical Drive:	Samsung BD
CRT/LCD Model:	LG W3000h
Case:	Antec Skeleton
Sound Card:	Asus Xonar
PSU:	Silverstone Zeus ZM1200M
Software:	7 64 (managed) - Vista 64 (stripped)
Benchmarks:	FFXIV Benchmark High Definition score 8,803

Jun 23, 2008, 01:23 AM	#18
t_ski Staff Join Date: Apr 2006 Location: Illinois, USA Posts: 8,893 (3.39/day) Thanks: 3,094 Thanked 3,349 Times in 2,552 Posts System Specs	The rad and fans on the bottom of the case are going to be inside, right? __________________ t_ski's stuff for sale ~ TPU Eyefinity Club ~ Heatware Silverstone TJ07 build ~ Mini ITX Home Server build Intel i7 3930K ~ Asus P9X79 Pro ~ 4 x 8GB Corsair Dominator Platinum 1866 C9 ~ Triple 7970's with EK FC-7970 CSQ ~ Triple Asus VW246H LCD's ~ 2 x 120 GB Corsair Force 3 (Raid 0) ~ 500GB WD ~ Lite-On BluRay ~ Nickel-plated Heatkiller 3.0 CU ~ D5 with EK X-top ~ BIX Quad Rad ~ Corsair AX1200 ~ Silverstone TJ07

System Name:	My i7 Beast
Processor:	Intel Core i7 3930K
Motherboard:	Asus P9X79 Pro
Cooling:	Heatkiller 3.0 Nickel, three FC-7970 CSQ with an FC-link , D5 with EK X-top Rev2 & BIX Quad Radiator
Memory:	4 x 8GB Corsair Dominator GT DDR3-1866
Video Card:	Two Sapphire 7970's + Asus 7970
Hard Disk:	2 x 120GB Corsair Force 3 SSDs in Raid 0 + 500GB WD
Optical Drive:	Lite-On BR Reader
CRT/LCD Model:	Three Asus 24" VW246H LCD's
Case:	Silverstone TJ07
Sound Card:	Onboard
PSU:	Corsair AX1200
Software:	Windows 7 x64 Ultimate

Jun 23, 2008, 01:50 AM	#19
kenkickr Join Date: Dec 2007 Location: Springfield, IL Posts: 4,497 (2.22/day) Thanks: 1,024 Thanked 1,330 Times in 1,096 Posts System Specs	Looking sweet Bytor(Awesome your a Rush fan)!!! I really like the mod your doing on top for the radiator, I was planning on doing something like that later to my CM690. JFYI: Have you seen the video of Geddy and Alex playing YYZ with Foo Fighters? Awesome if you have the time: http://www.youtube.com/watch?v=DT7bu...eature=related

System Name:	Wrigley II/ HTPC
Processor:	I7 X3820@ 4.7Ghz v1.39/ i3 2120 stock
Motherboard:	MSI X79 Big Bang (2.1 bios)/ Biostar H61GMC
Cooling:	H2O / Air
Memory:	4 x Samsung DDR3 1600 @ 2000 Cas10 / 4Gb kit OCZ DDR3 1600
Video Card:	7950 OTW + GTX 465(physx) / MSI 6570 2Gb
Hard Disk:	Corsair Force 3 128gb SSD, 2x 500gb Momentus XT Raid 0, 2TB Seagate , and 2TB WD Green / 500gb Seaga
Optical Drive:	Pioneer DVD burner / Lite On Blu Ray Combo drive
CRT/LCD Model:	3x Hanns-G 27" Eyefinity baby!! / 42" Plasma Samsung
Case:	Rosewill Blackhawk Ultra / Antec Minuet
Sound Card:	X-fi Titanium HD w/ PAX drivers / AMD HDMI
PSU:	Cougar 1000W / Antec 300W
Software:	Windows 8 Pro, Windows 7 Ult(Hyper-V) and Ubuntu Server(Hyper-V) / Windows 8 Pro w/ MCE

Jun 23, 2008, 08:45 PM	#22
Bytor Join Date: Jun 2007 Posts: 979 (0.45/day) Thanks: 130 Thanked 109 Times in 103 Posts System Specs	UPDATE!!! The case is almost complete... __________________ Canon 40d Gripped ~ 10-22mm UWA ~ 24-105mm L ~ 50mm f1.8 ~ 70-200mm f/2.8 IS L ~ 430ex II Speedlite All the World's Indeed a Stage, We are Merely Players, Performers and Portrayers!! *3DMark06 23397 Super PI 9.297 sec**

Jun 23, 2008, 09:21 PM	#23
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.43/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	I like how you made the holes offset on the feet allowing them to be brought out to make the tall case more stable or in for a cleaner look. __________________ Buy tin snips FIRST!

System Name:	Crossflow III
Processor:	AMD 965 (4.04Ghz)
Motherboard:	Asus Crosshair III
Cooling:	Air
Memory:	4 gigs Mushkin 7-7-7-20@1T
Video Card:	single 9800GT
Hard Disk:	Raptor 150's in Raid0
Optical Drive:	Plextor
CRT/LCD Model:	LG Flatron 24"
Case:	Custom
Sound Card:	AuzenTech X-Raider W/OP637
PSU:	Custom modded Corsair 750HX
Software:	Win 7 64/Solaris Utility
Benchmarks:	3DMark06--21963 so far

Jul 3, 2008, 02:07 AM	#25
Bytor Join Date: Jun 2007 Posts: 979 (0.45/day) Thanks: 130 Thanked 109 Times in 103 Posts System Specs	UPDATE!!! Painted inside of case... Pic's added __________________ Canon 40d Gripped ~ 10-22mm UWA ~ 24-105mm L ~ 50mm f1.8 ~ 70-200mm f/2.8 IS L ~ 430ex II Speedlite All the World's Indeed a Stage, We are Merely Players, Performers and Portrayers!! *3DMark06 23397 Super PI 9.297 sec**

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How-to: Pencil mod your HD 3870!	Random Murderer	AMD / ATI	1286	Nov 30, 2009 05:42 PM
8500/8600/GT/GTS Mod guide...	Solaris17	NVIDIA	446	Aug 13, 2009 01:05 AM
HOW TO: flip top optic drive mod	unsmart	Cases, Modding & Electronics	8	Jul 27, 2007 08:39 AM
Project Reality: BF2 mod	wazzledoozle	Games	10	Feb 15, 2007 10:37 PM
DFI LanParty UT nF3 250Gb 5V VDimm Mod	celemine1Gig	Articles	8	Sep 27, 2005 11:37 PM