cat 5.11 download!!!

SPHERE · Nov 10, 2005, 09:26 PM

http://www.anandtech.com/news/shownews.aspx?i=25250

http://www.tweaktown.com/file-librar...e=12&mirror=16

gman215 · Nov 11, 2005, 01:00 AM

any bugfixes in this release for ati x1000 series?

WarAnakin · Nov 11, 2005, 01:52 AM

Ok . After the long waiting time, here it is. Catalyst 5.11 . This one is official too. As usual, i toked my video card up for some tests.
Here is what i got :

1)=Catalyst 5.10
2)=Catalyst 5.11

---------Aquamark3---------3dmark2001---------3dmark2003-----------

(1)---------34253---------------11485----------------5225-----------------
(2)---------34259---------------11341----------------5229-----------------

Doom 3:

-----------noAA-----------------2xAA---------------4xAA--------------------

1)---------33FPS----------------30.7----------------24.2FPS---------------
2)---------32.8FPS--------------30.5----------------24FPS-----------------

I got some problems with 5.11 in 3dmark2001 ! The frames were going down and up, like they were crazy...
As for Doom 3, i can't say much except that it seems that it runs a bit smoother. No other improvement over the previous version.
I got more frames with 5.11 than 5.10. A good thing. Adaptive AA is once again off, and i wonder why ? Full support for x1k series, it was about time. Thing that bothers me, is that when you play Prince of Persia Warrior Within, the whole screen turns white except the top left corner of the screen. The game is unplayable ! Every other game seems to act normal.
There is not much to say about this driver and at the 1st look. There is not much too special about it if you compare it to the other drivers. But..., there is something that gives this driver an edge over it's brothers. It has a great tweaking potential. Just by turning on Geometry Instancing and setting the AI on advanced, you'll be able to get nice scores.
You should check this driver out because maybe it'll make you a pleasant surprise.

Recommended by TweaksRUs !

gonrain · Nov 11, 2005, 02:28 AM

3dmark05 score went up 14 points from 6806 to 6820..

with lower clocks tho..

560/625 really no noticable differences in FEAR, Quake 4, or CoD2.. ehh..

thanks for the link

Solaris17 · Nov 11, 2005, 04:03 PM

wow i got the new cats 5.11 and my bench marks r sweet!! my points whent up by about 50-60 in some cases nice!

BlackPearl · Nov 11, 2005, 08:50 PM

WarAnakin - what card are you using? Solaris17 got decent benchmark performance improvement from 5.11 on his 9800pro, but your change is, for all practical purposes, zero.

WarAnakin · Nov 11, 2005, 09:17 PM

I have an ATI 9800 PRO AIW .

Solaris17 · Nov 11, 2005, 09:19 PM

what clocks?

WarAnakin · Nov 11, 2005, 10:06 PM

Default clocks. 378 core and 338 memory.

Solaris17 · Nov 11, 2005, 11:14 PM

try boosting em

AxelL · Nov 13, 2005, 06:16 PM

And where is the softmodded atimtag.sys?

Cebit again?

Nov 10, 2005, 09:26 PM	#1
SPHERE Join Date: Mar 2005 Location: arizona (cave creek) Posts: 835 (0.28/day) Thanks: 3 Thanked 2 Times in 2 Posts System Specs	cat 5.11 download!!! http://www.anandtech.com/news/shownews.aspx?i=25250 http://www.tweaktown.com/file-librar...e=12&mirror=16

Processor:	opteron 165
Motherboard:	dfi cfx3200
Cooling:	zalman 7000
Memory:	mushkin xp4000
Video Card:	x1900xt
Hard Disk:	4x320 7200.10 raid
Optical Drive:	2xdvd ram
CRT/LCD Model:	21" sony trinitron
Case:	v2000b lianli
Sound Card:	x-fi platinum
PSU:	pcpac 510
Software:	gaydows

Nov 11, 2005, 01:00 AM	#2
gman215 Join Date: Nov 2005 Posts: 18 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	any bugfixes in this release for ati x1000 series? __________________ amd 3000+ Asus a8r-mvp with 1gb ram 200gb x 3 sapphire ati x1800xl 3dmark 2003 - 12130 3dmark 2005 - 6680 antec truepower 2.0 480 watt

Processor:	amd 3000+
Motherboard:	asus a8r-mvp
Cooling:	xp90+ thermaltake 90 smartfan
Memory:	1gb kingston ddr400
Video Card:	sapphire x1800xl
Hard Disk:	(seagate 200gb x 2) + maxtor 200gb
Optical Drive:	liteon 8x dvd burner
CRT/LCD Model:	samsung crt 17' 763mb
Case:	standard case
Sound Card:	builtin
PSU:	antec 480 truepower

Nov 11, 2005, 02:28 AM	#4
gonrain Join Date: Nov 2005 Posts: 20 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	3dmark05 score went up 14 points from 6806 to 6820.. with lower clocks tho.. 560/625 really no noticable differences in FEAR, Quake 4, or CoD2.. ehh.. thanks for the link __________________ A64 3000+ Winnie @ 2373 260 x 9 1.425v 35c/43c Gigabyte GA-K8NSNXP-939 nForce3 Ultra f13 Bios Patriot pc3200 2x512MB RAM @2.5-3-3-10 1T ATI x850pro» x850xtPE Bios 16 Piplines Running 24/7 at 570/590 33c/66c Antec NEOPower 480w PSU Creative Xi-Fi Xtreme Music 3DMark05 Score: 7156

Nov 11, 2005, 01:52 AM	#3
WarAnakin Join Date: Oct 2005 Location: Montreal Posts: 9 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Ok . After the long waiting time, here it is. Catalyst 5.11 . This one is official too. As usual, i toked my video card up for some tests. Here is what i got : 1)=Catalyst 5.10 2)=Catalyst 5.11 ---------Aquamark3---------3dmark2001---------3dmark2003----------- (1)---------34253---------------11485----------------5225----------------- (2)---------34259---------------11341----------------5229----------------- Doom 3: -----------noAA-----------------2xAA---------------4xAA-------------------- 1)---------33FPS----------------30.7----------------24.2FPS--------------- 2)---------32.8FPS--------------30.5----------------24FPS----------------- I got some problems with 5.11 in 3dmark2001 ! The frames were going down and up, like they were crazy... As for Doom 3, i can't say much except that it seems that it runs a bit smoother. No other improvement over the previous version. I got more frames with 5.11 than 5.10. A good thing. Adaptive AA is once again off, and i wonder why ? Full support for x1k series, it was about time. Thing that bothers me, is that when you play Prince of Persia Warrior Within, the whole screen turns white except the top left corner of the screen. The game is unplayable ! Every other game seems to act normal. There is not much to say about this driver and at the 1st look. There is not much too special about it if you compare it to the other drivers. But..., there is something that gives this driver an edge over it's brothers. It has a great tweaking potential. Just by turning on Geometry Instancing and setting the AI on advanced, you'll be able to get nice scores. You should check this driver out because maybe it'll make you a pleasant surprise. Recommended by TweaksRUs !

Nov 11, 2005, 04:03 PM	#5
Solaris17 Creator Solaris Utility DVD Join Date: Aug 2005 Location: Reinacting scenes from platoon with Charlie Sheen Posts: 13,708 (4.83/day) Thanks: 4,366 Thanked 3,295 Times in 2,311 Posts System Specs	wow i got the new cats 5.11 and my bench marks r sweet!! my points whent up by about 50-60 in some cases nice! __________________ I Made the Millionth post! \| "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide Vista Mark

System Name:	Prometheus
Processor:	Xeon W 3520 4.5ghz
Motherboard:	DFI Lanparty UT t3eH8
Cooling:	Xigmatek Dark Knight
Memory:	(3x8GB) 24GB Avexir Core series triple channel 1600mhz
Video Card:	MSI GTX470
Hard Disk:	OCZ Agility3 120, SS 1TB, SS 2TB
Optical Drive:	Pioneer DVD Dual layer burner R+RW (Firmware Upgrade)/Philips lightscribe DVD burner Dual layer
CRT/LCD Model:	Dell 2007FP
Case:	Xigmatek Utgard
Sound Card:	ASUS Xonar D2X 7.1 on Logitec X-540/Razer Carcharias
PSU:	Corsair HX1000
Software:	Windows8 x64 \|\|Poser7, Cinema4D, CS5, 3DSM10, Lightwave9, Bryce7
Benchmarks:	I'm such a tease

Nov 11, 2005, 08:50 PM	#6
BlackPearl Join Date: Dec 2004 Posts: 54 (0.02/day) Thanks: 5 Thanked 0 Times in 0 Posts	WarAnakin - what card are you using? Solaris17 got decent benchmark performance improvement from 5.11 on his 9800pro, but your change is, for all practical purposes, zero.

Nov 11, 2005, 09:17 PM	#7
WarAnakin Join Date: Oct 2005 Location: Montreal Posts: 9 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	I have an ATI 9800 PRO AIW .

Nov 11, 2005, 09:19 PM	#8
Solaris17 Creator Solaris Utility DVD Join Date: Aug 2005 Location: Reinacting scenes from platoon with Charlie Sheen Posts: 13,708 (4.83/day) Thanks: 4,366 Thanked 3,295 Times in 2,311 Posts System Specs	what clocks? __________________ I Made the Millionth post! \| "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide Vista Mark

Nov 11, 2005, 10:06 PM	#9
WarAnakin Join Date: Oct 2005 Location: Montreal Posts: 9 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Default clocks. 378 core and 338 memory.

Nov 11, 2005, 11:14 PM	#10
Solaris17 Creator Solaris Utility DVD Join Date: Aug 2005 Location: Reinacting scenes from platoon with Charlie Sheen Posts: 13,708 (4.83/day) Thanks: 4,366 Thanked 3,295 Times in 2,311 Posts System Specs	try boosting em __________________ I Made the Millionth post! \| "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide Vista Mark

Nov 13, 2005, 06:16 PM	#11
AxelL Join Date: Nov 2005 Posts: 2 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	And where is the softmodded atimtag.sys? Cebit again?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)