Your PC ATM - Page 288

Cold Storm · Feb 7, 2010, 04:22 AM

Quote:

Originally Posted by p_o_s_pc

are you sure you have the right person bro? I don't think i do that good of a job painting.

what worries me about having mine open is i am a klutz sometimes and spill drinks and i don't want it going right on my board and i have 2 cats

I need to get things done soon. I don't have any plans tomorrow maybe its time to break out the heaters and paint...

Also what would you recommend for cutting a hole in the bottom of the 300 for the PSU?

Yeah, I'm thinking you..

As for the klutz, yeah I know that feeling.. lol

well, if you have a dremel, that would be fine (square hole). Or, go out and grab a hole saw to attach to a drill.. The hole saw will be pricey, I paid $25 for a 120mm one, but well worth it.. I've used it for about 14 holes so far..

p_o_s_pc · Feb 7, 2010, 04:26 AM

Quote:

Originally Posted by Cold Storm

Yeah, I'm thinking you..

As for the klutz, yeah I know that feeling.. lol

well, if you have a dremel, that would be fine (square hole). Or, go out and grab a hole saw to attach to a drill.. The hole saw will be pricey, I paid $25 for a 120mm one, but well worth it.. I've used it for about 14 holes so far..

thanks

I have a dremel someplace(in a box)

i even think i have a hole saw(have seen it someplace before) Looks don't matter much as it won't be seen and only will be used to let the PSU suck cool air in. Now does it have to be a 120mm hole or can it be smaller?

TheMailMan78 · Feb 7, 2010, 04:27 AM

Quote:

Originally Posted by p_o_s_pc

thanks

I have a dremel someplace

You should see a doctor for that.

p_o_s_pc · Feb 7, 2010, 04:30 AM

Quote:

Originally Posted by TheMailMan78

You should see a doctor for that.

OMG that isn't right but is funny... I mean in a box someplace

Cold Storm · Feb 7, 2010, 04:35 AM

Quote:

Originally Posted by p_o_s_pc

thanks

I have a dremel someplace(in a box)

i even think i have a hole saw(have seen it someplace before) Looks don't matter much as it won't be seen and only will be used to let the PSU suck cool air in. Now does it have to be a 120mm hole or can it be smaller?

well, I would go and make a hole as big as the fan it self.. now if you have a smaller hole saw.. trace the area for a 120mm fan.. Then with the hole saw you have. Drill in the 4 corners and then shave the rest to make it a full 120. you can do it with a smaller one. Just gotta do a little more work to make it look like one drill hole.

p_o_s_pc · Feb 7, 2010, 04:41 AM

Quote:

Originally Posted by Cold Storm

well, I would go and make a hole as big as the fan it self.. now if you have a smaller hole saw.. trace the area for a 120mm fan.. Then with the hole saw you have. Drill in the 4 corners and then shave the rest to make it a full 120. you can do it with a smaller one. Just gotta do a little more work to make it look like one drill hole.

thanks for the idea i never thought of that

Also the 300 is getting glossy black this time. The red looks nice but its just not something that i really like on the whole interior but the front mesh part is getting a good cleaning and fresh coat of red as it has been scratched up also(i don't know how that happened

)

Cold Storm · Feb 7, 2010, 04:46 AM

Quote:

Originally Posted by p_o_s_pc

thanks for the idea i never thought of that

Also the 300 is getting glossy black this time. The red looks nice but its just not something that i really like on the whole interior but the front mesh part is getting a good cleaning and fresh coat of red as it has been scratched up also(i don't know how that happened

)

You'd be surprised on how something may get scratched up.. even the paces you wouldn't think about..

p_o_s_pc · Feb 7, 2010, 04:49 AM

Quote:

Originally Posted by Cold Storm

You'd be surprised on how something may get scratched up.. even the paces you wouldn't think about..

The front of the case behind the plastic has a scratch on it somehow when i only take the front off to clean the filter and i am careful when i do so that doesn't happen.

MT Alex · Feb 7, 2010, 06:49 AM

I'm very close to finishing the major overhaul on my rig. It's my first foray into the world of watercooling, and I'm pretty pleased with the outcome. It would be hard to fit much more into my case but I didn't want an external rad. The only thing left is a little more annoying cable management and maybe a few more light adjustments. I also lost the cap to my res, so there is a ghetto rubber stopper in there for now.

I have a single 230mm fan over the dual radiator, which seems to work really well, and is very quiet. Had to do a lot of cutting, drilling and painting, so it is nice to have all my components back inside the case, not strewn about my dest. But, I'm bored already, so I will have to come up with more "chores."

Also, I received quite a bit of help from fellow TPUers, and purchased most of the WC components from the FS thread.

theonedub · Feb 7, 2010, 06:55 AM

That Azza is looking good, very nice for your first WC

I was tempted to pick that one up to replace my Fantom.

sneekypeet · Feb 7, 2010, 06:55 AM

very nicely done, reminds me alot of parts I sold someone on TPU

MT Alex · Feb 7, 2010, 07:03 AM

Thanks, folks. Yah, I like my Solano pretty well. It's got good air flow and is quiet, a great case for the price. I can see myself moving up to an Obsidian in the next year or so, just for more room to screw around in.

Glad to put your leftovers to good use, peet

I'm not sure I'm using the right nozzle in my block, I debated whether to use the quad nozzle, but it seemed like it was more for Intel chips, so I just put the fattest holed one in.

Kovoet · Feb 7, 2010, 12:05 PM

I'm too embarrassed to put mine here as with some of yours are so neat but hey what the hell here it is.

Last week Sunday after buying my stuff and feeling quite happy with the goodies I bought.

musek · Feb 7, 2010, 12:18 PM

Quote:

Originally Posted by Kovoet

I'm too embarrassed to put mine here as with some of yours are so neat but hey what the hell here it is.
http://img513.imageshack.us/img513/1...1272635676.jpg

Last week Sunday after buying my stuff and feeling quite happy with the goodies I bought.

http://img683.imageshack.us/img683/1...1272635676.jpg

Dude, you just CAN'T be ashamed when you have a 5870 batmobil inside the case (a case that is also very, very neat!)

Great stuff!

DonInKansas · Feb 7, 2010, 12:29 PM

Yah, I'd be REAL embarrased of an i7 rig with a 5870 in it..........

Assassin48 · Feb 7, 2010, 12:34 PM

Some Prepping being done

Kovoet · Feb 7, 2010, 12:36 PM

Wow

aCid888* · Feb 7, 2010, 12:38 PM

One more before it gets put inside a case.

Edit: Image edited because TPU's resize feature messed up the last one.

douglatins · Feb 7, 2010, 12:56 PM

Quote:

Originally Posted by Kovoet

I'm too embarrassed to put mine here as with some of yours are so neat but hey what the hell here it is.
http://img513.imageshack.us/img513/1...1272635676.jpg

Last week Sunday after buying my stuff and feeling quite happy with the goodies I bought.

http://img683.imageshack.us/img683/1...1272635676.jpg

Hey man hows that Fenrir treating your i7? Some reviews say its the best air cooler

Kovoet · Feb 7, 2010, 12:59 PM

To be honest Doug it is about 5 degree's cooler that my old Noctua 12.

Very easy to install and to be honest the quietest CPU cooler I have ever owned and very impressed with it

douglatins · Feb 7, 2010, 01:24 PM

Quote:

Originally Posted by Kovoet

To be honest Doug it is about 5 degree's cooler that my old Noctua 12.

Very easy to install and to be honest the quietest CPU cooler I have ever owned and very impressed with it

If it could support 2 fans i would get it to replace my mega

PP Mguire · Feb 7, 2010, 01:31 PM

Quote:

Originally Posted by Assassin48

Some Prepping being done

http://img709.imageshack.us/img709/9591/p1010696l.jpg
http://img694.imageshack.us/img694/1839/p1010697f.jpg
http://img294.imageshack.us/img294/33/p1010698m.jpg
http://img402.imageshack.us/img402/8821/p1010699x.jpg

Yes another extreme cooling fan!

My eVGA still has my rubber stuff and liquid e-tape just patiently waiting my LN2 tank

Assassin48 · Feb 7, 2010, 01:34 PM

Quote:

Originally Posted by PP Mguire

Yes another extreme cooling fan!

My eVGA still has my rubber stuff and liquid e-tape just patiently waiting my LN2 tank

haven't had a chance to bench lately been too busy.

those 2 PCIE slots were prepped for some CF Dice action

will be interesting running 3 pots at once but i think i can handle it

Do you have pics up ?
Ill be taking a Ton of pics once i get going , just need to setup my tripod and everything.

pantherx12 · Feb 7, 2010, 03:14 PM

Woo having two rigs again, parents realised system in system specs was overkill for them, putting them together a pentium d system ( yes I know they're shite, but fine for parents!)

Went through ebay saw bargains left right and centre for CPU coolers, but I decided to go with something OEM but completely different to anything I've ever seen

aCid888* · Feb 7, 2010, 03:19 PM

More pictures and links to who makes it.

System Name:	Haru
Processor:	i7 3770k @ 4.5ghz
Motherboard:	Biostar Tz77xme4
Cooling:	Koolance C370si loop
Memory:	8gb G. Skill Trident X 2400mhz at 10-11-11-28
Video Card:	XFX Double D 7950 / Zotac 620 for physx
Hard Disk:	Samsung 830 128gb (os)Muskin Chronos 120gb, Pyro 120gb
Optical Drive:	Asus Blu-Ray (SBW-06C1S-U)
CRT/LCD Model:	Testing: Vizio 37" lcd tv / Viewsonic VX2450WM-LED 24" & Hanns G 28"
Case:	Cooler Master Cosmos II
Sound Card:	Auzentech X-fi Forte 7.1 Opamp modded
PSU:	Silverstone Strider Plus 1000w pp05 cables
Software:	Win7 Pro64
Benchmarks:	i5 750 4.62ghz pi runs // Evga FTW p55

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

System Name:	The Mailbox 3.5
Processor:	Intel i7 2600k @ 3.8GHz
Motherboard:	ASUS Maximus IV Gene-Z
Cooling:	Stock
Memory:	G.SKILL Sniper Series 8GB DDR3 1866: 9-9-9-24
Video Card:	EVGA GTX670 "FTW" Edition @ 1006MHz
Hard Disk:	256gb M4 SSD, 500Gb WD (7200)
Optical Drive:	LG - 24x Double-Layer DVD±RW/CD-RW Drive
CRT/LCD Model:	24" ASUS 1920 x 1080
Case:	Cooler Master 922 HAF
Sound Card:	SupremeFX X-Fi 2 with Bose Companion 2 speakers.
PSU:	SeaSonic X Series X650 Gold
Software:	Windows 8 Pro w/Media Center 64bit
Benchmarks:	Benching is for bitches.

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

System Name:	Haru
Processor:	i7 3770k @ 4.5ghz
Motherboard:	Biostar Tz77xme4
Cooling:	Koolance C370si loop
Memory:	8gb G. Skill Trident X 2400mhz at 10-11-11-28
Video Card:	XFX Double D 7950 / Zotac 620 for physx
Hard Disk:	Samsung 830 128gb (os)Muskin Chronos 120gb, Pyro 120gb
Optical Drive:	Asus Blu-Ray (SBW-06C1S-U)
CRT/LCD Model:	Testing: Vizio 37" lcd tv / Viewsonic VX2450WM-LED 24" & Hanns G 28"
Case:	Cooler Master Cosmos II
Sound Card:	Auzentech X-fi Forte 7.1 Opamp modded
PSU:	Silverstone Strider Plus 1000w pp05 cables
Software:	Win7 Pro64
Benchmarks:	i5 750 4.62ghz pi runs // Evga FTW p55

Feb 7, 2010, 06:49 AM	#7184
MT Alex Join Date: Aug 2009 Location: Montana Posts: 2,040 (1.44/day) Thanks: 2,599 Thanked 1,331 Times in 924 Posts System Specs	I'm very close to finishing the major overhaul on my rig. It's my first foray into the world of watercooling, and I'm pretty pleased with the outcome. It would be hard to fit much more into my case but I didn't want an external rad. The only thing left is a little more annoying cable management and maybe a few more light adjustments. I also lost the cap to my res, so there is a ghetto rubber stopper in there for now. I have a single 230mm fan over the dual radiator, which seems to work really well, and is very quiet. Had to do a lot of cutting, drilling and painting, so it is nice to have all my components back inside the case, not strewn about my dest. But, I'm bored already, so I will have to come up with more "chores." Also, I received quite a bit of help from fellow TPUers, and purchased most of the WC components from the FS thread. __________________ “growing up, i always wanted to be a vet. til i learned there was more to being a vet than just putting down cats all day.” -digibucc My 700D

System Name:	Abacus
Processor:	i5 2500K
Motherboard:	ASRock p67 Extreme4 Gen3
Cooling:	Swiftech MCP35X, 2 DD 5870 WB, EK HF Copper, 2.120 rad, 3.120 rad
Memory:	2x4GB G.Skill Sniper 1600
Video Card:	2 Sapphire HD 5870 w/ Danger Den WBs
Hard Disk:	WD 640BG x2/WD 250GB/Samsung 2TB
Optical Drive:	Silly
CRT/LCD Model:	ASUS VH242 23.6" LCD
Case:	Corsair 700D
Sound Card:	X-Fi XtremeGamer
PSU:	Thermaltake Toughpower 700w Modular
Software:	Windows 7 Home Premium 64bit OEM

Feb 7, 2010, 06:55 AM	#7185
theonedub habe fidem Join Date: Apr 2009 Location: Northern CA Posts: 6,668 (4.41/day) Thanks: 2,321 Thanked 3,219 Times in 1,937 Posts System Specs	That Azza is looking good, very nice for your first WC I was tempted to pick that one up to replace my Fantom. __________________ My Heatware Feedback 129+ Pristine

System Name:	WCG0
Processor:	i7 3770k @ 4.2ghz 1.080v
Motherboard:	AsRock Z77 Extreme 4 M
Cooling:	NZXT Kraken X60
Memory:	16GB Corsair Vengeance DDR3 1600
Video Card:	EVGA NVIDIA GTX 780 3GB
Hard Disk:	256gb Corsair Performance Pro, 2TB Caviar Green, 2TB Samsung F4
CRT/LCD Model:	DELL Ultrasharp U2713HM 27"
Case:	Corsair Obsidian 350D
PSU:	Seasonic X750
Software:	Windows 7 Pro x64
Benchmarks:	WCG & F@H

Feb 7, 2010, 06:55 AM	#7186
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 19,115 (7.28/day) Thanks: 3,062 Thanked 5,500 Times in 3,959 Posts System Specs	very nicely done, reminds me alot of parts I sold someone on TPU __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

System Name:	His
Processor:	Intel i7 3770K Cooled with Swiftech Apogee Drive II
Motherboard:	Asus Maximus V Extreme
Cooling:	Swiftech MCR-320 Cooled With Corsair SP120 Fans
Memory:	4X4GB Corsair Dominator Platinum 2666 C11
Video Card:	Asus GTX680 Direct Cu II TOP
Hard Disk:	Corsair Force GT 180GB / Samsung Spinpoint F1 1TB
Optical Drive:	- - - - - - -
CRT/LCD Model:	Samsung 40" 120hz LCD
Case:	SilverStone Temjin TJ11
Sound Card:	Realtek on board > Sony receiver > Cerwin Vega's
PSU:	Corsair AX1200
Software:	Windows 7 Ultimate 64

Feb 7, 2010, 07:03 AM	#7187
MT Alex Join Date: Aug 2009 Location: Montana Posts: 2,040 (1.44/day) Thanks: 2,599 Thanked 1,331 Times in 924 Posts System Specs	Thanks, folks. Yah, I like my Solano pretty well. It's got good air flow and is quiet, a great case for the price. I can see myself moving up to an Obsidian in the next year or so, just for more room to screw around in. Glad to put your leftovers to good use, peet I'm not sure I'm using the right nozzle in my block, I debated whether to use the quad nozzle, but it seemed like it was more for Intel chips, so I just put the fattest holed one in. __________________ “growing up, i always wanted to be a vet. til i learned there was more to being a vet than just putting down cats all day.” -digibucc My 700D

Feb 7, 2010, 12:05 PM	#7188
Kovoet Join Date: Mar 2008 Location: Lost in London Posts: 633 (0.33/day) Thanks: 48 Thanked 123 Times in 102 Posts System Specs	I'm too embarrassed to put mine here as with some of yours are so neat but hey what the hell here it is. Last week Sunday after buying my stuff and feeling quite happy with the goodies I bought. __________________ Last edited by Kovoet; Feb 7, 2010 at 12:41 PM.

System Name:	Kov's Sharks
Processor:	i7 I2700K 4.5ghz
Motherboard:	Asus Sabertooth Z77
Cooling:	H100i Cpu cooler
Memory:	Corsair Vengeance 1600mhz 16GB
Video Card:	ASUS GTX680 DirectCUii Top
Hard Disk:	120GB Mushkin Deluxe, Corsair 128GB pro & 256GB 840 pro
Optical Drive:	LG Blu-Ray DVD-RW
CRT/LCD Model:	Dell U2311H and U2312HM
Case:	Coolermaster Cosmos II
Sound Card:	Asus Donar DX
PSU:	AX850 with white cables. Corsair
Software:	windows 7 Premuim

System Name:	Notebook HP EliteBook 8460p
Processor:	Intel i5 2410
Memory:	4GB DDR3
Video Card:	Intel HD Graphics 3000
Hard Disk:	Some 250GB 7200rpm HDD
CRT/LCD Model:	LG W2452V-PF 24" lcd
Software:	Ubuntu 11.11 \| Win 7 Professional

Feb 7, 2010, 12:29 PM	#7190
DonInKansas Join Date: Jun 2007 Location: Kansas Posts: 4,261 (1.93/day) Thanks: 779 Thanked 1,275 Times in 1,007 Posts System Specs	Yah, I'd be REAL embarrased of an i7 rig with a 5870 in it.......... __________________ Sneekypeet on my disappearance from TPU: "He went to school for a while to learn how to deal with douchebags and delight in pastries and exotic coffees....or in English, he is a cop now." You know what time it is......

Processor:	Core i5 750
Motherboard:	Gigabyte p55-ud3r
Cooling:	Zalman CNPS10X Extreme
Memory:	Geil 2133mhz DDR3
Video Card:	XFX 6870
Hard Disk:	120GB GSkill Phoenix Pro, 640GB WD Black
Optical Drive:	Sony DVDRW SATA
CRT/LCD Model:	LG 23" 1920x1080
Case:	Antec One
Sound Card:	Onboard
PSU:	Antec HCG 620W
Software:	Windows 7 Pro x64

Feb 7, 2010, 12:34 PM	#7191
Assassin48 Join Date: Oct 2008 Location: 95350 Posts: 2,760 (1.62/day) Thanks: 286 Thanked 518 Times in 460 Posts System Specs	Some Prepping being done __________________ CPU-Z validation sig pics temporarily blocked

Feb 7, 2010, 12:36 PM	#7192
Kovoet Join Date: Mar 2008 Location: Lost in London Posts: 633 (0.33/day) Thanks: 48 Thanked 123 Times in 102 Posts System Specs	Wow __________________

Feb 7, 2010, 12:38 PM	#7193
aCid888* Join Date: May 2008 Location: In a state of flux... Posts: 2,297 (1.24/day) Thanks: 360 Thanked 660 Times in 547 Posts	One more before it gets put inside a case. Edit: Image edited because TPU's resize feature messed up the last one. __________________ HTPC: E8500 @ 3.8GHz 1.20v ~ Passive Xiggy HDT-1283 ~ X38 Maximus Formula (Rampage BIOS) ~ 2x1GB Mushkin 1150mhz @ 950mhz 2.0v ~ 2x500GB RAID0 ~ eVGA 9800GTX+ SC ~ 52" Toshiba 1920x1080 LCD ~ Windows XP SP3 ~ Logitech Z-5500 5.1 “I would like to thank acid for this pivotal moment in internet history were he has just successfully forced the creation of a brand new meme.” -Solaris17 Last edited by aCid888; Feb 7, 2010 at 01:11 PM.*

System Name:	His (aCid888*) ..:\|:.. Hers (p1nky)
Processor:	Q9550 @ 4.25GHz (1.29v) - Lapped Koolance CPU-345 ..:\|:.. 945ES @ 3.82GHz (1.47v) - Lapped Fuzion v1
Motherboard:	Gigabyte EP-45 UD3P (MX-2 NB + SB) ..:\|:.. Asus M3A79-T Deluxe 790FX (MX-2 NB + SB)
Cooling:	MCP-355/XSPC 200ml Restop + Feser X-Changer 360 ..:\|:.. MCP-355/XSPC 200ml + Black Ice Extreme 360
Memory:	2x2GB OCZ Flex II 1150mhz @ 1200mhz 5-5-5-15 ..:\|:.. 2x2GB G.Skill Pi Black @ 864MHz 4-4-4-12
Video Card:	PNY "XLR8" 9800GX2 ..:\|:.. HIS 4870 1GB @ 800/1000 (Stock Air For Now)
Hard Disk:	Western Digital "AAKS" 640GB + XP SP3 ..:\|:.. Seagate 500GB + XP SP3
Optical Drive:	Black LightScibe LG ..:\|:.. Black LightScribe LG
CRT/LCD Model:	22" BenQ E2200HD @ 1920x1080 ..:\|:.. 22" Acer P223w @ 1680x1050
Case:	Modded Lian Li PC-7FW ..:\|:.. Modded Lian Li PC-6F
Sound Card:	SoundBlaster Audigy 2 ZS (Heatsink Mod) ..:\|:.. SoundBlaster Audigy 2 (Heatsink Mod)
PSU:	Zalman ZM750-HP 750w Modular ..:\|:.. OCZ ModXStream-Pro 600w Modular
Software:	A Lot?
Benchmarks:	Many?

System Name:	Sovereign // HTPC
Processor:	i7 3770k 4.2 // i7 3770k 4.2
Motherboard:	Maximus V Gene // Sabertooth Z77
Cooling:	Noctua D14 // Intel HSF
Memory:	16GB Samsung // 16GB VengeanceLP
Video Card:	Deciding // 660 DC2
Hard Disk:	OS (X25-M), Data (Seagate 1TB) // Samsung 840 120GB & bunch of drives
Optical Drive:	None // None
CRT/LCD Model:	Samsung T240HD // LG TV
Case:	TJ08e // Grandia GD08
Sound Card:	DT880 Pro 250 ohm // TV speakers
PSU:	Seasonic Plat 1000 // Seasonic Gold 760
Software:	Windows 8 Pro x64 // Windows 7 Pro x64

Feb 7, 2010, 12:59 PM	#7195
Kovoet Join Date: Mar 2008 Location: Lost in London Posts: 633 (0.33/day) Thanks: 48 Thanked 123 Times in 102 Posts System Specs	To be honest Doug it is about 5 degree's cooler that my old Noctua 12. Very easy to install and to be honest the quietest CPU cooler I have ever owned and very impressed with it __________________

System Name:	Univac \ Univaclap
Processor:	Intel Core i3 @ 4.4ghz\ C2D P8400
Motherboard:	Gigabyte P55-UD3R\ Intel MP45
Cooling:	True 120 Black \ 17" Zalman cooler black
Memory:	2x2gb Kingson HyperX 2000mhz \ 4gig DDR3 1066
Video Card:	XFX 4890\ 9800 GTS M
Hard Disk:	64gig G.Skill SSD + 1tb Seagate + 2tb Seagate + 160gb WD Black 2.5 + 120Gb Maxtor (XP)
CRT/LCD Model:	Samsung 23" Syncmaster 2343 2048x1152 \ 17" 1920x1200
Case:	NZXT Beta \ Laptop
Sound Card:	Creative X-Fi Xtreme Gamer PCI
PSU:	Thermaltake 1000watt Toughpower Modular
Software:	Windows 7 Ultimate X64 OEM (Legit) + XP SP2 x86 dual boot
Benchmarks:	27,192 3dmark06 (4.0ghz i5 + 280 SLI all air) 23k 06 single 280 4.6ghz i5 single stage 14k 06 4850

Feb 7, 2010, 03:14 PM	#7199
pantherx12 Eligible for custom title Join Date: Jan 2009 Location: ENGLAND-LAND-LAND Posts: 8,443 (5.18/day) Thanks: 1,188 Thanked 1,705 Times in 1,375 Posts System Specs	Woo having two rigs again, parents realised system in system specs was overkill for them, putting them together a pentium d system ( yes I know they're shite, but fine for parents!) Went through ebay saw bargains left right and centre for CPU coolers, but I decided to go with something OEM but completely different to anything I've ever seen __________________ http://www.heatware.com/eval.php?id=68840

System Name:	Panther's PC
Processor:	FX8120 4.5 ghz + 0.125 volts over stock
Motherboard:	Gigabyte 990fxa ud3
Cooling:	Ek Supreme, Coolingking Tripple Thick Copper Radiator
Memory:	Hyperx 4x2gb 1600mhz
Video Card:	460 768mb : [
Hard Disk:	WD blue 500gb
CRT/LCD Model:	AOC HD
Case:	Mountain Mods U2-UFO
Sound Card:	Audigy z2
PSU:	Powercool 750w modular PSU ( GAMBLING YAY!)
Software:	Windows SEVEN
Benchmarks:	Pffft benchmarking for me is for the lulz only!

Feb 7, 2010, 03:19 PM	#7200
aCid888* Join Date: May 2008 Location: In a state of flux... Posts: 2,297 (1.24/day) Thanks: 360 Thanked 660 Times in 547 Posts	More pictures and links to who makes it. __________________ HTPC: E8500 @ 3.8GHz 1.20v ~ Passive Xiggy HDT-1283 ~ X38 Maximus Formula (Rampage BIOS) ~ 2x1GB Mushkin 1150mhz @ 950mhz 2.0v ~ 2x500GB RAID0 ~ eVGA 9800GTX+ SC ~ 52" Toshiba 1920x1080 LCD ~ Windows XP SP3 ~ Logitech Z-5500 5.1 “I would like to thank acid for this pivotal moment in internet history were he has just successfully forced the creation of a brand new meme.” -Solaris17

Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
HeavyHemi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What's the best ATi Graphics card atm?	kebabs	AMD / ATI	10	Dec 23, 2008 12:59 PM
Jericho: anyone playing this atm?	HookeyStreet	Games	6	Oct 27, 2007 11:37 PM
[FS \| FT \| WTB] : PC Hardware - Wireless K&M + USB Media Card Readers + Various Stuff	Sovereign	Buy/Sell/Trade/Giveaway Forum	11	Mar 5, 2007 01:24 AM