Your PC ATM - Page 357

Yukikaze · Mar 20, 2010, 02:38 PM

Quote:

Originally Posted by douglatins

Awesomeness achieved, i was thinking about getting that case, but dont know if i end up getting a SR2, so no room

I'm not gonna go dual-CPU anytime soon. What I currently have is overkill enough. lol.

The ATCS 840 is an awesome case, though. Roomy, very well built for a WC setup and has a TON of fans.

KieX · Mar 20, 2010, 07:13 PM

Currently testing a new low budget system to upgrade my sister's Athlon 64 3800+ with 1GB RAM. Looking good so far:

Pentium E6300 @ 3.5GHz (334x10.5) on stock volts
Scythe Shuriken Rev.B
Gigabyte GA-G31M-ES2L
4GB OCZ 1066MHz DDR2
XFX ATI 5450 512MB Passive Cooler

It's running 50C on full load idles around 35C and is practically inaudible. But more importantly for my sister it plays BluRay without stutters and Firefox, Microsoft Word... open quickly. Draws just under 90W total too.

dafour · Mar 20, 2010, 07:26 PM

Busy with some airflow changing,its a mess..

*2nd case is a P2.4b with a Abit- BH7 and riva tnt2 ...

[Ion] · Mar 20, 2010, 07:51 PM

Quote:

Originally Posted by Radical_Edward

Om nom nom, night shots.

http://i49.photobucket.com/albums/f2...n/fe485e3a.jpg

More can be seen here.

I had that case for my last build, and I really liked it. The airflow & cable management were quite good, there was a decent amount of interior space, but it wasn't big or expensive. I actually paid $75 for mine, so $40 is a great deal. I didn't think the right-side fan had much effect, but it was loud, so I just didn't use one.

p_o_s_pc · Mar 20, 2010, 08:22 PM

@dafour nice case you have there

Needs some WM but so does mine lol

I am going to be changing the rad soon so i'm not worried about wires all that much right now. I will take care of them when i have my loop out. Also i had to add some foam strips between the rad and the case to make a better seal so all the air has to pass through the rad and reduced vibration so its quieter

Radical_Edward · Mar 21, 2010, 04:57 PM

Quote:

Originally Posted by [Ion]

I had that case for my last build, and I really liked it. The airflow & cable management were quite good, there was a decent amount of interior space, but it wasn't big or expensive. I actually paid $75 for mine, so $40 is a great deal. I didn't think the right-side fan had much effect, but it was loud, so I just didn't use one.

It's working pretty well for me.

But then again, so is this new toy that showed up.

My under load temps dropped about 5*C, and I'm pretty sure it's only that small of a amount due to room temp.

Lionheart · Mar 21, 2010, 07:05 PM

Damn you guys have good quality camera's!

Soylent Joe · Mar 21, 2010, 07:05 PM

Quote:

Originally Posted by Radical_Edward

That cooler looks slick with the red fan and grill. Nice upgrade

A CRT, it hurts! No really, I haven't been on one of these jokers in years and my eyes are killing me after only 30 minutes. It's a 16" ESA, I got it at the Goodwill for $6. Figured it couldn't hurt to have an extra one to hook up to a little Presario I've got. Just testing it out on my rig for a bit.

Radical_Edward · Mar 21, 2010, 07:20 PM

Quote:

Originally Posted by CHAOS_KILLA

Damn you guys have good quality camera's!

It's a $80 point and shoot I got from newegg....

Takes okay pictures, but kinda meh video.

Quote:

Originally Posted by Soylent Joe

That cooler looks slick with the red fan and grill. Nice upgrade

Thanks! I like it quite a bit.

sNiPeRbOb · Mar 21, 2010, 07:27 PM

HOLY CRT! now that's a flashback for me! lol

boulard83 · Mar 21, 2010, 07:31 PM

A few shot of my PC right now !

MustangGT2142 · Mar 21, 2010, 08:20 PM

Here is my PC atm.

I modded 2 holes on the side panel for 2 120mm fans

I'm going to upgrade to a 5850 soon when the prices drop and I'll also buy a T260HD 26'' monitor.

As for the cpu cooler, I really don't need a better one, because the temps don't get higher then 50°C under load.

pantherx12 · Mar 21, 2010, 08:29 PM

Quote:

Originally Posted by MustangGT2142

As for the cpu cooler, I really don't need a better one, because the temps don't get higher then 50°C under load.

You say that, but yet you have a ram cooler, I bet your ram was not even warm to touch

Just teasing of course, but in all seriousness what's with the ram cooler?

MustangGT2142 · Mar 21, 2010, 08:38 PM

Quote:

Originally Posted by pantherx12

You say that, but yet you have a ram cooler, I bet your ram was not even warm to touch

Just teasing of course, but in all seriousness what's with the ram cooler?

I bought used ram for half a price of a new one and the cooler was with it. If I would buy a new ram, I wouldn't buy those with the cooler. Anyway its better then nothing. But yeah, I should mentioned that in the first place.

Chicken Patty · Mar 21, 2010, 08:55 PM

Quote:

Originally Posted by Radical_Edward

It's a $80 point and shoot I got from newegg....

Takes okay pictures, but kinda meh video.

Thanks! I like it quite a bit.

You don't have a rear case exhaust fan? That surely hurts your temps a lot.

Radical_Edward · Mar 21, 2010, 09:50 PM

I did, but it was a 90ishmm that was too loud, and it doesn't hurt my temps at all. The two 120mm top fans do all the work. I have another 3 more 120mms on order, as well as a 140mm.

Radical_Edward · Mar 22, 2010, 01:47 AM

Well, after CP brought up the no rear exhaust fan thing, I started getting bothered by it, and I raided my parts bin for a fan that wasn't loud. Found a Evercool 80mm. Tossed it in.

Also, I think this is about as much cable management as I'll do until I get my new Mobo, PSU, Graphics card, and hard drives...

Chicken Patty · Mar 22, 2010, 01:51 AM

Quote:

Originally Posted by Radical_Edward

Well, after CP brought up the no rear exhaust fan thing, I started getting bothered by it, and I raided my parts bin for a fan that wasn't loud. Found a Evercool 80mm. Tossed it in.

Also, I think this is about as much cable management as I'll do until I get my new Mobo, PSU, Graphics card, and hard drives...

Don't know how much a 80mm moves, but a 120mm will def. keep the VRM's cooler and the entire case cooler, guaranteed!

Radical_Edward · Mar 22, 2010, 01:57 AM

Like I said, I have a 120mm on order for that spot, I also will be replacing my case side and the bottom 120mm with a 140mm fan.

Here's my order from CM's website that I'll be making this week.

Soylent Joe · Mar 22, 2010, 02:06 AM

Quote:

Originally Posted by Radical_Edward

Like I said, I have a 120mm on order for that spot, I also will be replacing my case side and the bottom 120mm with a 140mm fan.

Here's my order from CM's website that I'll be making this week.

http://i49.photobucket.com/albums/f2...n/bd54fc50.jpg

Man, the side panel for yours is cheap. I had to pay $40 after shipping for mine and it doesn't even have a fan spot

Radical_Edward · Mar 22, 2010, 02:12 AM

They are on sale on CM's website right now, Newegg still has them listed for $25ish.

Chicken Patty · Mar 22, 2010, 02:19 AM

That should help alot rad ed.

adam99leit · Mar 22, 2010, 02:30 AM

got bored and had everything laying around so i went liquid on the cosmos s build ive been doing this also includes changed the side mesh to a window and put the cosmos logo on that looks nice together

look at the last pic everything 100% perfect mosfet fan 1/8 inch from 120mm fan and 120mm fan fits perfectly in the slot on the mosfet block its like just perfect

sNiPeRbOb · Mar 22, 2010, 02:33 AM

You are going to LOVE the R4 CM fans. Just got 5 of em for my rebuild, not too loud and will undervolt nicely.

Chicken Patty · Mar 22, 2010, 02:34 AM

Quote:

Originally Posted by adam99leit

Bro that looks great bro

Ootta love the watercooling possibilities inside a CM case

System Name:	Wintermute
Processor:	Intel Core i7 990X Extreme Edition @ 4.3Ghz
Motherboard:	Asus Rampage III Extreme
Cooling:	Swiftech MCP655, MCR320-QP, MCR220 and MCRES Rev2, EK Supreme HF Cu, Tygon 1/2", Bitspower Fittings.
Memory:	12GB (3x4GB) Corsair Vengeance 2Ghz CL10-10-10-27
Video Card:	Sapphire HD7950 3GB + Palit GeForce GTX470 1280MB Dual Fan + Sapphire HD6570 1GB
Hard Disk:	Intel X-25M 160GB SSD (Win7) + Patriot Torqx2 64GB SSD (Ubuntu) + 3 x Samsung F2 1.5TB RAID5
Optical Drive:	LG x22 DVD-RW
CRT/LCD Model:	2 x Samsung 2333T 23" + Samsung 2333SW 23" + 1 x LG L2000CN 20" + 1 Chimei 19" + 1 Sony 32" TV
Case:	Cooler Master ATCS 840
Sound Card:	Musiland Monitor 02 US + Logitech Z-2300 + Sennheiser PXC350
PSU:	Corsair TX750
Software:	Windows 7 Professional 64-bit + Ubuntu 10.4.2LTS 64-bit

Mar 20, 2010, 07:13 PM	#8902
KieX Join Date: Dec 2009 Location: A Coruña, Spain Posts: 2,050 (1.64/day) Thanks: 6,950 Thanked 2,643 Times in 1,136 Posts System Specs	Currently testing a new low budget system to upgrade my sister's Athlon 64 3800+ with 1GB RAM. Looking good so far: Pentium E6300 @ 3.5GHz (334x10.5) on stock volts Scythe Shuriken Rev.B Gigabyte GA-G31M-ES2L 4GB OCZ 1066MHz DDR2 XFX ATI 5450 512MB Passive Cooler It's running 50C on full load idles around 35C and is practically inaudible. But more importantly for my sister it plays BluRay without stutters and Firefox, Microsoft Word... open quickly. Draws just under 90W total too. __________________

System Name:	Slick
Processor:	Intel i5 2467M
Motherboard:	Samsung Series 5 Ultrabook
Memory:	8GB Corsair Value
Hard Disk:	Crucial M4 7mm 256GB
CRT/LCD Model:	13"
Software:	Windows 8 Pro x64

Mar 20, 2010, 07:26 PM	#8903
dafour Join Date: Mar 2010 Location: Belgium Posts: 1 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	Busy with some airflow changing,its a mess.. 2nd case is a P2.4b with a Abit- BH7 and riva tnt2 ... Last edited by dafour; Mar 20, 2010 at 07:33 PM.*

System Name:	Build '08
Processor:	E6550 G0 @3.57Ghz 1.44v
Motherboard:	P35-DS3 rev 2.1
Cooling:	H50 CPU / Twin Turbo GPU
Memory:	2x2GB OCZ Gold 1066
Video Card:	MSI 9800GTX+ OC OC'd
Hard Disk:	7200.10 250GB / WD 640 Black
Optical Drive:	NEC DVD-RW
CRT/LCD Model:	32" 1080p / 19" Syncmaster 940BW
Case:	Antec Three Hundred
Sound Card:	Audigy 2 24-bit
PSU:	Corsair 550W
Software:	7 Ultimate
Benchmarks:	14.500 3d06

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

Mar 20, 2010, 08:22 PM	#8905
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	@dafour nice case you have there Needs some WM but so does mine lol I am going to be changing the rad soon so i'm not worried about wires all that much right now. I will take care of them when i have my loop out. Also i had to add some foam strips between the rad and the case to make a better seal so all the air has to pass through the rad and reduced vibration so its quieter __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

System Name:	GLaDOS
Processor:	AMD Phenom II X6 1055T 2.8 ghz
Motherboard:	MSI 990FXA-GD65
Cooling:	Corsair H50
Memory:	Corsair DDR3 1333Mhz (2 x 4GB)
Video Card:	MSI R7970
Hard Disk:	2 WD Blue 500GBs, 1 WD 1TB
Optical Drive:	MSI 24X DVD-RW SATA DH-24AS
CRT/LCD Model:	2 Acer S231HL 23" LED backlit LCD's on a Dual LCD stand
Case:	Corsair 600T White edition
Sound Card:	Onboard
PSU:	Corsair 850HX 850W
Software:	Microsoft Windows 7 Ultimate 64-bit

Mar 21, 2010, 07:05 PM	#8907
Lionheart Join Date: Apr 2008 Location: Sydney Posts: 3,415 (1.85/day) Thanks: 2,482 Thanked 740 Times in 527 Posts System Specs	Damn you guys have good quality camera's!

System Name:	I'm Thirsty!
Processor:	i7 970 @ 4Ghz Hyperthreading On
Motherboard:	ASUS X58 Rampage II Extreme Motherboard
Cooling:	Noctua D14 \|\| 3x200m 1x 230mm 4x 140mm 2x 120mm fans
Memory:	12GB G-Skill Sniper Running @ 1600Mhz 9,9,9,24
Video Card:	HIS HD7950 3GB Overclocked @ 1000Mhz / 1400Mhz
Hard Disk:	Corsair FS3 120GB SSD \|\| 2TB WD Black Caviar HDD
Optical Drive:	LG 10x speed Blu-ray Burner (I never use it)
CRT/LCD Model:	27inch LG Flatron E2742 1920x1080
Case:	Coolermaster HAF X Full Tower Case
Sound Card:	SupremeFX X-Fi Sound Card
PSU:	Corsair HX1000W Modular PSU
Software:	Windows 7 Home Premium 64bit
Benchmarks:	Gaming \|\| HD Movies \|\| Music \|\| Pictures \|\| Net

System Name:	Timucua 2.1
Processor:	i7-2700K
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair H100
Memory:	16GB G.Skill Ripshits X 1600MHz
Video Card:	Sapphire HD 5850 1GB
Hard Disk:	Kingston 128GB SSD + WD Black 640GB + 2x 1.5TB
Optical Drive:	LG DVD burner
CRT/LCD Model:	24" Acer G245HQ + 19" Lenovo L194
Case:	NZXT Switch 810 White
Sound Card:	Fox Magic
PSU:	Corsair TX750W
Software:	Windows 7: Electric Boogaloo

Mar 21, 2010, 07:27 PM	#8910
sNiPeRbOb Join Date: Jul 2009 Location: MA Posts: 190 (0.14/day) Thanks: 11 Thanked 68 Times in 47 Posts System Specs	HOLY CRT! now that's a flashback for me! lol __________________ {Build Log} MorderPanzer {/Build Log}

System Name:	MörderPanzer
Processor:	AMD Phenom II 940@3.3Ghz (200x16.5 1.35vcore)
Motherboard:	MSI K9N2 SLI Platinum
Cooling:	Koolance CPU-340, Swiftech MCR220 w/ Medium Yates, MCP655 Vario, 1/2-3/4 PC Blue Tubing
Memory:	Crucial DDR2 800 Ballistix (4X1GB)
Video Card:	XFX HD4890 1GB
Hard Disk:	WD Blue 500GB
Optical Drive:	DVD-Rom
CRT/LCD Model:	22" Westinghouse
Case:	NZXT Panzerbox
Sound Card:	Soundblaster XFi Gamer
PSU:	Rosewill 600w
Software:	W7

Mar 21, 2010, 07:31 PM	#8911
boulard83 Join Date: Jan 2009 Posts: 256 (0.16/day) Thanks: 4 Thanked 54 Times in 41 Posts	A few shot of my PC right now ! __________________ • Le Québécois • • • BTTB • • • • EVGA X79 FTW • I7 3820 • PH-TC14PE • 16gb G.Skill 2133mhz • EVGA GTX 670 + Accelero TTII Tecnofront HWD BenchTable • Antec TPQ-1200-OC • 2x Agility 4 256gb • Surround Asus VE278Q 5760x1080 • • • • HTPC • • • • Asus Z77-m Pro • 2500K • NH-C12P • 2x4gb G.Skill Ares 1600mhz Asus GTX 650 TI • X25-M 80gb • Enermax Naxn 550w • Lian Li PC-C60B[b] Forum Québécois, si tu parles français !

System Name:	Boulard83 Rig V4.0
Processor:	I7 920 D0 @ 4.0ghz 1.2875v (still tweeking)
Motherboard:	P6TD Deluxe (191x21)
Cooling:	Apogee GTZ, TFC360, Komodo, MCR220, 2x MCP655, MCresV2
Memory:	3x2gb G.Skill Trident @ 1528mhz 7-7-7-21-1N-72 @ 1.54v
Video Card:	HD5870 @ 950/1300 1.187v and 1066/1325 bench
Hard Disk:	WD VR150 OS, 2x WD 250 SE16 raid0, WD green 500gb 32mb
Optical Drive:	LG DVD RW
CRT/LCD Model:	22" LG
Case:	Tecnofront HWD
Sound Card:	onboard
PSU:	Antec 1200 OC
Software:	Win7 Pro 64
Benchmarks:	~27k 3Dmark06 6.084sec Wprime

Mar 21, 2010, 08:20 PM	#8912
MustangGT2142 Join Date: Feb 2010 Location: Slovenia Posts: 71 (0.06/day) Thanks: 23 Thanked 30 Times in 19 Posts System Specs	Here is my PC atm. I modded 2 holes on the side panel for 2 120mm fans I'm going to upgrade to a 5850 soon when the prices drop and I'll also buy a T260HD 26'' monitor. As for the cpu cooler, I really don't need a better one, because the temps don't get higher then 50°C under load.

Processor:	Intel Core i5 2500K
Motherboard:	Gigabyte GA-Z68XP-UD4
Cooling:	Xigmatek Gaia SD1283
Memory:	Corsair Vengeance 16GB 1600Mhz cl9
Video Card:	Crossfire HD 5850 1GB
Hard Disk:	Crucial m4 SSD 128GB, WD Black 640GB
Optical Drive:	Asus DRW-24B3ST
CRT/LCD Model:	Samsung SyncMaster T260HD
Case:	NZXT Gamma
Sound Card:	Asus Xonar D1
PSU:	Corsair HX 650W
Software:	Win 7 Ultimate 64-bit

System Name:	Panther's PC
Processor:	FX8120 4.5 ghz + 0.125 volts over stock
Motherboard:	Gigabyte 990fxa ud3
Cooling:	Ek Supreme, Coolingking Tripple Thick Copper Radiator
Memory:	Hyperx 4x2gb 1600mhz
Video Card:	460 768mb : [
Hard Disk:	WD blue 500gb
CRT/LCD Model:	AOC HD
Case:	Mountain Mods U2-UFO
Sound Card:	Audigy z2
PSU:	Powercool 750w modular PSU ( GAMBLING YAY!)
Software:	Windows SEVEN
Benchmarks:	Pffft benchmarking for me is for the lulz only!

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Mar 21, 2010, 09:50 PM	#8916
Radical_Edward Join Date: Jan 2010 Location: Oregon, USA Posts: 3,139 (2.59/day) Thanks: 2,559 Thanked 1,964 Times in 1,073 Posts System Specs	I did, but it was a 90ishmm that was too loud, and it doesn't hurt my temps at all. The two 120mm top fans do all the work. I have another 3 more 120mms on order, as well as a 140mm. __________________ My heatware My FS thread Solaris Utility DVD TacticalHandleGaming

Mar 22, 2010, 01:47 AM	#8917
Radical_Edward Join Date: Jan 2010 Location: Oregon, USA Posts: 3,139 (2.59/day) Thanks: 2,559 Thanked 1,964 Times in 1,073 Posts System Specs	Well, after CP brought up the no rear exhaust fan thing, I started getting bothered by it, and I raided my parts bin for a fan that wasn't loud. Found a Evercool 80mm. Tossed it in. Also, I think this is about as much cable management as I'll do until I get my new Mobo, PSU, Graphics card, and hard drives... __________________ My heatware My FS thread Solaris Utility DVD TacticalHandleGaming Last edited by Radical_Edward; Mar 22, 2010 at 01:51 AM. Reason: Forgot the photo! Whoops...

Mar 22, 2010, 01:57 AM	#8919
Radical_Edward Join Date: Jan 2010 Location: Oregon, USA Posts: 3,139 (2.59/day) Thanks: 2,559 Thanked 1,964 Times in 1,073 Posts System Specs	Like I said, I have a 120mm on order for that spot, I also will be replacing my case side and the bottom 120mm with a 140mm fan. Here's my order from CM's website that I'll be making this week. __________________ My heatware My FS thread Solaris Utility DVD TacticalHandleGaming

Mar 22, 2010, 02:12 AM	#8921
Radical_Edward Join Date: Jan 2010 Location: Oregon, USA Posts: 3,139 (2.59/day) Thanks: 2,559 Thanked 1,964 Times in 1,073 Posts System Specs	They are on sale on CM's website right now, Newegg still has them listed for $25ish. __________________ My heatware My FS thread Solaris Utility DVD TacticalHandleGaming

Mar 22, 2010, 02:19 AM	#8922
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.93/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	That should help alot rad ed. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Mar 22, 2010, 02:30 AM	#8923
adam99leit Join Date: Oct 2007 Location: nunica MI Posts: 290 (0.14/day) Thanks: 107 Thanked 71 Times in 52 Posts System Specs	got bored and had everything laying around so i went liquid on the cosmos s build ive been doing this also includes changed the side mesh to a window and put the cosmos logo on that looks nice together look at the last pic everything 100% perfect mosfet fan 1/8 inch from 120mm fan and 120mm fan fits perfectly in the slot on the mosfet block its like just perfect __________________

Processor:	i3 530
Motherboard:	asus
Cooling:	stock
Video Card:	gigabyte 470 soc
Hard Disk:	320GB OS 500GB&1TB STORAGE
PSU:	ultra 750w

Mar 22, 2010, 02:33 AM	#8924
sNiPeRbOb Join Date: Jul 2009 Location: MA Posts: 190 (0.14/day) Thanks: 11 Thanked 68 Times in 47 Posts System Specs	You are going to LOVE the R4 CM fans. Just got 5 of em for my rebuild, not too loud and will undervolt nicely. __________________ {Build Log} MorderPanzer {/Build Log}

Currently Active Users Viewing This Thread: 5 (0 members and 5 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What's the best ATi Graphics card atm?	kebabs	AMD / ATI	10	Dec 23, 2008 12:59 PM
Jericho: anyone playing this atm?	HookeyStreet	Games	6	Oct 27, 2007 11:37 PM
[FS \| FT \| WTB] : PC Hardware - Wireless K&M + USB Media Card Readers + Various Stuff	Sovereign	Buy/Sell/Trade/Giveaway Forum	11	Mar 5, 2007 01:24 AM