Performance Requirement Bit Software Lock?

Napkin · Nov 16, 2005, 07:04 PM

hi this is chris from germany.. i got a question...

i am using a p4 551 3,4ghz processor which supports the c1e or prb hardware
power saving option...(sorry donno how to explain)

and my processor got an multiplier of x17...but in idle mode it changes to x14! i checked that with cpu-z.

so x14 would be great to overclock the cpu...

is there a software program to lock the multiplier to x14.. or is it possible to emultate an "always idle system" ...so that the cpu will switch to x14??????

i hope you get what i am looking for
thx for your help
chris

W1zzard · Nov 16, 2005, 07:15 PM

yes you can use systool or another eist tool .. google should help

Napkin · Nov 16, 2005, 07:17 PM

im not the best in english so is it possible that you discribe me how to use systool to set the multiplier to x14

i got an abit aw8 board.. i checked systool but i cant find any option to set the multiplier

W1zzard · Nov 16, 2005, 07:32 PM

second option "enhanced intel speedstep"

Napkin · Nov 16, 2005, 07:34 PM

its totaly blank on both columns.. multiplier and voltage..

do i have to activate or deactivate some stuff in my bios?
it tells me "this feature is not supported by your system"

but the processor switches between x14 and x17...

is it possible that i first have to install frame networking 2.0?
like i have to .. when i use hardware control for my notebook with pentium m?

Napkin · Nov 16, 2005, 08:11 PM

or r there any services i have to activate in windows?

Napkin · Nov 16, 2005, 09:15 PM

i checked the intel page... and read that the lga 551 which i am using not support eist... but why is it stepping between 14 and 17 ????? can someone explain that to me?

Nov 16, 2005, 07:04 PM	#1
Napkin Join Date: Nov 2005 Posts: 15 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	Performance Requirement Bit Software Lock? hi this is chris from germany.. i got a question... i am using a p4 551 3,4ghz processor which supports the c1e or prb hardware power saving option...(sorry donno how to explain) and my processor got an multiplier of x17...but in idle mode it changes to x14! i checked that with cpu-z. so x14 would be great to overclock the cpu... is there a software program to lock the multiplier to x14.. or is it possible to emultate an "always idle system" ...so that the cpu will switch to x14?????? i hope you get what i am looking for thx for your help chris

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

Nov 16, 2005, 07:17 PM	#3
Napkin Join Date: Nov 2005 Posts: 15 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	im not the best in english so is it possible that you discribe me how to use systool to set the multiplier to x14 i got an abit aw8 board.. i checked systool but i cant find any option to set the multiplier Last edited by Napkin; Nov 16, 2005 at 07:24 PM.

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

Nov 16, 2005, 07:34 PM	#5
Napkin Join Date: Nov 2005 Posts: 15 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	its totaly blank on both columns.. multiplier and voltage.. do i have to activate or deactivate some stuff in my bios? it tells me "this feature is not supported by your system" but the processor switches between x14 and x17... is it possible that i first have to install frame networking 2.0? like i have to .. when i use hardware control for my notebook with pentium m? Last edited by Napkin; Nov 16, 2005 at 07:47 PM.

Nov 16, 2005, 07:15 PM	#2
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,758 (4.18/day) Thanks: 184 Thanked 10,207 Times in 3,156 Posts System Specs	yes you can use systool or another eist tool .. google should help

Nov 16, 2005, 07:32 PM	#4
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,758 (4.18/day) Thanks: 184 Thanked 10,207 Times in 3,156 Posts System Specs	second option "enhanced intel speedstep"

Nov 16, 2005, 08:11 PM	#6
Napkin Join Date: Nov 2005 Posts: 15 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	or r there any services i have to activate in windows?

Nov 16, 2005, 09:15 PM	#7
Napkin Join Date: Nov 2005 Posts: 15 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	i checked the intel page... and read that the lga 551 which i am using not support eist... but why is it stepping between 14 and 17 ????? can someone explain that to me?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)