Get Your Modded P5Q Pro BIOS Here!

[Fitseries3]

i need a modded p5q3 bios.

[vazovskiiii]

Originally Posted by jo7878

http://www.megaupload.com/?d=7N4O9MRX
P5Q mBIOS 1306
1. Add custom P6 CPU table, 39 varients of CPUs supported instead of 31 - more than any P45 or ROG series!
2. Add P5Q Premium memory table to drastically enhance DRAM compatibility and overclocking.
3. Change default boot logo
4. Resize boot logo slightly

---Asus changes
1. Amend specific CPU temperature detection methods
2. Enhance memory performance
3. Enhance memory compatibility
4. CPU control of the new micro-code

ket's, most reason mBIOS. better than p5q-e bios.

read all here ,,
http://www.xtremesystems.org/Forums/...3&postcount=61

i have allready that bios but sorry this iz the same as 1306 from asus as a look yes i know about custom P6 CPU table, 39 varients of CPUs supported instead of 31 - more than any P45 or ROG series!
but bios is the same i need p5q-e bios for more overclocking options that have p5q-e thats why i;m asking
i'd like to indicate that ketzzz is super and 1306 bios great i just need p5q-e mod bios on my p5q non pro with cossflashin is it possible?

[Tatty_One]

Originally Posted by fitseries3

i need a modded p5q3 bios.

I'll 2nd that when my board arrives next week! how have you got on with 13? I just have the OCZ platinum 1333 sticks but on my 790 ultra I could acheive the clocks in my specs (1800mhz @ 7-6-6-20), should I not expect quite so much from this board? No real matter, this will probably be just a 5 week board till XFX send me a replacement 790.....unless of course I lke this one better by then? depends really how this board will clock a Q9650.

[Fitseries3]

p5q3 has a problem with certain ram. you may be ok with yours though.

[Kursah]

I'm hoping to see another bios release soon. I don't know if it'll make any differences or not..just kinda more curious than anything!

Fit, I'm working on 4.3GHz now, 430x10, 1.304v is stable Prime for around 1 hour before one of the cores fail, NB 1.26v, VTT/FSB 1.10v (maybe 1.16v), LLC on.

What about the Clock Skews, worth messing with? I can't really tell if GTL's actually helped me out or not at this point...so I set em back to auto.

[hema]

ASUS P5Q BIOS build 1307:
http://rapidshare.com/files/14363706...-1307.ZIP.html
P5Q Deluxe1402:
http://kielbaski.com/pmp/MB/ASUS_P45...ELUXE-1402.ZIP

modified behaviour of vNB voltage downgrade while using Epu6 utility
- fixed the bug that you were unable to install OS when Yorkfield C1 with FSB1600 was used
- fixed EzFlash2
- revised DMI table in order to support new windows 7 requirements
- +minor updates as well

[Fitseries3]

why cant we get a modded p5q3 bios?

[hema]

you can ask ket here

[Stalefish]

Im having an issue that I find hard to crack! So please help me.

I can only boot up with 2 memory sticks into the motherboard. If I used 3 or 4 sticks it doesnt boot, but everything keeps on running but I dont get a screen or a beep from the PC-speaker.

I am using Corsair XMS2 800Mhz (1gb sticks). I can use the two sticks both in slot 1 & 2, and in slot 1 & 3 (havent tried 1&4, but it probably works). It just feels that there is nothing wrong with the motherboard or the memory sticks, i just need to get all the sticks running at the same time!

PLEASE HELP!

[jo7878]

MEM. OC Charger: ENABLED .NB Voltage: 1.4 . DRAM Voltage to 2.1 n try .also try 400 fsb strap n 900mhz. work for me after that.

[Stalefish]

Originally Posted by jo7878

MEM. OC Charger: ENABLED .NB Voltage: 1.4 . DRAM Voltage to 2.1 n try .also try 400 fsb strap n 900mhz. work for me after that.

Where do you find the 400 fsb option? I couldnt chose from 900mhz, it was something on 866Mhz and the next step was something on 1000mhz.


EDIT: I actually found "FSB Strap to Northbridge" and put it on 400Mhz, but I still dont have the option to choose 900mhz, it's either 887mhz or 999mhz.

thanks

[Stalefish]

Actually, I have gotten some tips from friends, they wanted me to test each memory stick separately in the motherboard, so I did.

And 2 of my 4 memorysticks doesnt work separately in the motherboard. This results that the fans just keeps going and I dont get a beep from the PC-speaker.

2 of the memory sticks works together in dual channel so Im using that configuration until I've gotten the two other sticks to work....

How do I interpret that the computer doesnt even boot when I use the two sticks separately? Are they impaired? Is it something wrong with the mobo? (sounds wierd since it works with two of the other sticks)

[Zehnsucht]

To boot it is required to have working RAM. If the mobo passes POST with some sticks and not with other it is due to one of the following reasons:

• RAM stick is dead and/or
• RAM stick not supported by BIOS

I've had the Corsair XMS2 400 MHz sticks myself and they worked perfectly. The next step for you to take is to let one of your friends try your sticks that don't work in their computers.

[Scrizz]

P5QL Pro?

[TJK]

Hey man thanks for making this new Bios. I'm a noob to overclocking but I'm planning on getting into it so I figured it would be a good idea to start with something that's already upgraded. I was able to reflash without a hitch. Hopefully soon I'll be able to OC. Thanks again!

[Tatty_One]

Has anyone with the P5Q3 tried the new 14 Beta BIOS yet?

[Mr_Light]

Any chance you can hack a

"don't halt on errors" function in there? for running without a videocard. cheers

[sysq6]

hi there!
my system: p5q pro (1306 offical bios) + q6600 G0 + mushkin 996578 8500 memory

i wanna oc my system my cpu vid value 1.25 i set memory timing and 1066 mhz it works but cpu auto mode (stock 2400mhz) if i set cpu higher mhz my memory doesnt work stable it gives dump files and bluescreen whats best setting for oc?? i tried low mem mhz 800 ,933,1053 but not work

thanks for replies!

[vazovskiiii]

hallo everyboy has anyone tried to do crossflashing p5q non pro on p5q-e or other?

[smafixer]

Ket meant to post a couple of weeks ago. Your 1004 bios took care of all my probs. 1st build and was really tearing my hair. Thanks much!!!

[tigger]

Try directing your questions here guys-
http://www.xtremesystems.org/forums/...d.php?t=200109

Seems like he has'nt posted in this thread for a while.

[iluv2fly]

Here is a better link,

http://www.xtremesystems.org/Forums/...76#post3275676

[Ketxxx]

I'm feeling lazy so Heres a link to where you can grab the latest revisions of my P5Q series mBIOSes. Any feedback just post it here or over at XS

[tigger]

He's the wanderer oh the wanderer

Hello

[Tatty_One]

Originally Posted by tigger

He's the wanderer oh the wanderer

Hello

He gets around and around and around