overclock question

[Hayder_Master]

hello guys i need your advice for overclock my rig
i want to max overclock with safe voltage
first my gigabyte 8800gt
with my card there is a overclock program called HUD, it's simple in overclock too and it made for only gigabyte 8800gt keep me in safe voltage , but am use rivatuner sometimes , so how much i can reach

mobo is abit nf-m2s,
cpu is amd 6000x2,
and 2g ram / 800 run at 5-5-5-18 / 2t





but now my only problem is cpu when i update my bios the voltage bar and multiplier bar is gone , my old bios did not support overclock well only i reach 217 fsb of cpu , how i can back hide bar from bios , or any other way to increase the voltage

thanx guys

[SerenadeRB]

What do you mean by a "high save overclock"?
Are you overclocking you GPU only, your CPU as well, or just the FSB?
Do you have programs (such as http://www.techpowerup.com/downloads...Benchmark.html) to test for GPU stability/overclock?
I hope I am able to help.

[Hayder_Master]

Originally Posted by SerenadeRB

What do you mean by a "high save overclock"?
Are you overclocking you GPU only, your CPU as well, or just the FSB?
Do you have programs (such as http://www.techpowerup.com/downloads...Benchmark.html) to test for GPU stability/overclock?
I hope I am able to help.

sure i have it open gl benchmark , also i need overclock it all, about high safe overclock i mean max overclock in safe voltage,

[xubidoo]

i assume save = safe

max overclock with safe voltage ?

dont mean to offend ,just trying to be clear about your meaning.

[Hayder_Master]

Originally Posted by xubidoo

i assume save = safe

max overclock with safe voltage ?

dont mean to offend ,just trying to be clear about your meaning.

sorry guys English not my first language, one letter make problem here , sure i mean safe

[Hayder_Master]

guys anyone

[wolf]

HUD will only let you go up to 1.2v that is totally safe, you can get to 1.3v with a hardmod and the chip can take more than that, although it will crash from over current protection, well, at least mt 8800GT did :P

as for your cpu, up to 1.55 v should be a show in.

does that answer the questions? im sorry but i too am at a bit of a loss as to exactly what you are asking

[Hayder_Master]

Originally Posted by wolf

HUD will only let you go up to 1.2v that is totally safe, you can get to 1.3v with a hardmod and the chip can take more than that, although it will crash from over current protection, well, at least mt 8800GT did :P

as for your cpu, up to 1.55 v should be a show in.

does that answer the questions? im sorry but i too am at a bit of a loss as to exactly what you are asking

thanx man, but what about bus

[Silverel]

With good cooling you could probably take that FSB around 220-225. start at 210 and test every 5mhz though. That 15x multi is gonna make things move up pretty quick, and the X2 line starts to struggle around 3.2ghz

[Hayder_Master]

i can't increase fsb over 205 , i think it is my mobo problem , am update the bios nothing change , did i must change my mobo or there is something can help

[Silverel]

Are you overclocking from bios?

A couple things. Try increasing voltage a couple bumps in your bios. 1.35-1.4 should be enough to take you to 3.2ghz if your board isn't limiting. Also, if you've already increased voltage to around there, skip the 205 and go higher anyway. You never know what the board is limiting. Might just be blocking a certain range. I recall this from some review site not being able to get a Phenom past 2.7, then they went way over the block and hit 2.9 instead.

[Hayder_Master]

Originally Posted by Silverel

Are you overclocking from bios?

A couple things. Try increasing voltage a couple bumps in your bios. 1.35-1.4 should be enough to take you to 3.2ghz if your board isn't limiting. Also, if you've already increased voltage to around there, skip the 205 and go higher anyway. You never know what the board is limiting. Might just be blocking a certain range. I recall this from some review site not being able to get a Phenom past 2.7, then they went way over the block and hit 2.9 instead.

yes am use bios , but last time when i update bios the cpu field which is contend the voltage and multiplier are gone, only fsb field is stay , so i think am go back to old bios , but my old bios don't read my cpu , it call it as amd processor unknown , but with new one it read it fine as amd x2 6000+ dual core , so am confused

[tigger]

Seems like your stuck between a rock and a hard place,go back on the old bios which does not recognize the cpu,or stay with the newer bios that does not have the vcore and multiplier controls.

could you not use this bios and use a windows overclocking utility like clockgen?

[Hayder_Master]

Originally Posted by tigger69

Seems like your stuck between a rock and a hard place,go back on the old bios which does not recognize the cpu,or stay with the newer bios that does not have the vcore and multiplier controls.

could you not use this bios and use a windows overclocking utility like clockgen?

the clockgen don't recognize my mobo , i am try it before

[Hayder_Master]

now i reach 217 fsb , but am test it with everst , it is not stable i got blue screen , i think cuz i not increase the voltage , as i say with my bios i can't increase it so any other idea please

,
also i got this error

[Hayder_Master]

guys anyone please before i kill my mobo and cpu

[Silverel]

Voltage is low, temps are good. Not a lot of Mobo/CPU death in your future, imo.

If it happens though, we can point you to much better OC'ing stuff.

[Hayder_Master]

Originally Posted by Silverel

Voltage is low, temps are good. Not a lot of Mobo/CPU death in your future, imo.

If it happens though, we can point you to much better OC'ing stuff.

thanx my friend so can i increase voltage with other way , some way under windows

[rangerone766]

i know very little about amd, but on some of the older intel chips. you could "pin mod" the voltage, bend or break off certain pins to up the voltage.

i had a 2.4ghz mobile celeron that my bios didnt recognize, a quick bent pin changed the voltage to 1.6 and it clocked up to 3.6ghz. that was my first desktop system actuall.

i just woke up so my brain is not working yet, but i'm sure the other people around here can point you in the right direction.

[Hayder_Master]

so we can say there is no other way to increase voltage that is disappointingly

[Hayder_Master]

so if i must change my mobo , what mobo better for overclock i must got

[hat]

is this idle or load?
http://forums.techpowerup.com/attach...6&d=1215589983

As for your gpu, just use RivaTuner. Unlink the core and shaders and push each individual component as far as it goes, then back off some, like 10MHz or so.

as for the CPU don't expect to get any more than 3.4 with it really... 3.3 might work at 1.5v, but that's really not doable with the stock cooler IMO. Pick up a good cooler.

[Hayder_Master]

Originally Posted by hat

is this idle or load?
http://forums.techpowerup.com/attach...6&d=1215589983

As for your gpu, just use RivaTuner. Unlink the core and shaders and push each individual component as far as it goes, then back off some, like 10MHz or so.

as for the CPU don't expect to get any more than 3.4 with it really... 3.3 might work at 1.5v, but that's really not doable with the stock cooler IMO. Pick up a good cooler.

so what about increase voltage , i can't increase it from bios , as i type new bios remove the voltage and multiplier bar from bios , any other way

[Hayder_Master]

did i must change my mobo

[Hayder_Master]

now guys i back for my old bios , i am can change the voltage now , but the old shit bios don't have the dem voltage also i can't reach more than 207 fsb , now i angry what must i do to overclock my cpu , help me guys i am almost throw my mobo