calculation error detected in OCCT

Uptime73 · Aug 4, 2008, 07:31 PM

Hello all. I am running OCCT to test staility and it crashes about 4 minutes into the test. ItS giveing me a code 4, which is a calculation. What should I do?

I have Iwill P4HT motherboard with Intel 2.4 GHz processor with 1 stick of ! GB memory (PNY 2700 333 MHz). The memory is set to 266. The AGP/PCI slots are locked at 33/66. Vcore voltage is set to 1.5 V. Thanks.

- Josh

sneekypeet · Aug 4, 2008, 07:57 PM

OCCT is very vague in its errors. Usually if I fail at OCCT I have pushed way too far or need more voltage somewhere!

fullinfusion · Aug 13, 2008, 11:16 PM

Quote:

Originally Posted by sneekypeet

OCCT is very vague in its errors. Usually if I fail at OCCT I have pushed way too far or need more voltage somewhere!

what program you like or should i say TRUST? occt or Prime95?
i pass prime all day and all night but occt gives an code 4 error shortly into it's start up..

sneekypeet · Aug 14, 2008, 12:51 AM

I use orthos and prime myself, but that is odd that OCCT fails, while others dont!

a_ump · Aug 14, 2008, 12:54 AM

i use OCCT all the time, though i'm thking about including sp2004, that's the same as prime isn't it?

fullinfusion · Aug 14, 2008, 01:04 AM

Quote:

Originally Posted by sneekypeet

I use orthos and prime myself, but that is odd that OCCT fails, while others dont!

well when i clock the crap outa this amd platform.... AOD passes.... then prime fails... so i back off a teeenie weinne bit and Prime passes 12+ hrs but occt fails only min's after it run's?

sneekypeet · Aug 14, 2008, 01:10 AM

@ fulinfusion, I can see that as I have had issues with OCCT running on certain systems. I say if prime runs for 12+hours, the OC is fine.

@ a_ump....Prime95....http://files.extremeoverclocking.com/file.php?f=103

fullinfusion · Aug 14, 2008, 01:17 AM

Quote:

Originally Posted by sneekypeet

@ fulinfusion, I can see that as I have had issues with OCCT running on certain systems. I say if prime runs for 12+hours, the OC is fine.

@ a_ump....Prime95....http://files.extremeoverclocking.com/file.php?f=103

Well thank's SP.... i alway's had trouble passing prime till i got a little smarter in my voltage settings... AOD would pass but game's would crash... Sooo i use Prime and untill it passes im not set up proper.... thanks again.... time to play with NB-freq now hehe.... up to

Aug 4, 2008, 07:31 PM	#1
Uptime73 Join Date: Feb 2005 Location: Columbus, Ohio USA Posts: 113 (0.04/day) Thanks: 14 Thanked 3 Times in 3 Posts System Specs	calculation error detected in OCCT Hello all. I am running OCCT to test staility and it crashes about 4 minutes into the test. ItS giveing me a code 4, which is a calculation. What should I do? I have Iwill P4HT motherboard with Intel 2.4 GHz processor with 1 stick of ! GB memory (PNY 2700 333 MHz). The memory is set to 266. The AGP/PCI slots are locked at 33/66. Vcore voltage is set to 1.5 V. Thanks. - Josh

System Name:	custom built clone
Processor:	AMD Phenom 9950 Quad Core (Agena)
Motherboard:	ASUS M3A78-EM
Cooling:	Zalman CNPS9700 LED
Memory:	OCZ Fatal1ty PC2 8500 4 GB (2 x 2GB)
Video Card:	Visiotek ATI Radeon 3650
Hard Disk:	Western Digital 320 GB SATA II hard drive
Optical Drive:	Compaq cd rom and dvd rom/cd-rw combo
CRT/LCD Model:	Proview CRT
Sound Card:	onboard
PSU:	475 watt not sure of brand
Software:	Vista Ultimate Edition x64, Service Pack 2

Aug 4, 2008, 07:57 PM	#2
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 18,983 (7.32/day) Thanks: 3,032 Thanked 5,481 Times in 3,947 Posts System Specs	OCCT is very vague in its errors. Usually if I fail at OCCT I have pushed way too far or need more voltage somewhere! __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

System Name:	His
Processor:	Intel i7 3770K Cooled with Swiftech Apogee Drive II
Motherboard:	Asus Maximus V Extreme
Cooling:	Swiftech MCR-320 Cooled With Corsair SP120 Fans
Memory:	4X4GB Corsair Dominator Platinum 2666 C11
Video Card:	Asus GTX680 Direct Cu II TOP
Hard Disk:	Corsair Force GT 180GB / Samsung Spinpoint F1 1TB
Optical Drive:	- - - - - - -
CRT/LCD Model:	Samsung 40" 120hz LCD
Case:	SilverStone Temjin TJ11
Sound Card:	Realtek on board > Sony receiver > Cerwin Vega's
PSU:	Corsair AX1200
Software:	Windows 7 Ultimate 64

System Name:	Wattage sucking Bitch II
Processor:	i7 2700K @4.9GHz 24/7 @ 1.36v
Motherboard:	ROG Maximus IV Extreme-Z68
Cooling:	EK Supreme HF EN Full Nickel Plated \| twin Noctua NF-F12's \| Black Ice GT Stealth 240
Memory:	Corsair Dominator platinum 2133 Tweaked 2x4Gb sticks
Video Card:	2X MSI R7970 OC cross-fire reference edition @ 1250/1550MHz stock 1.175v
Hard Disk:	OCZ Vertex 4 128Gb
Optical Drive:	Asus DRW-24B1ST *quietest drive ever!
CRT/LCD Model:	Gateway 24" led/Samsung 56 Led DLP
Case:	Corsair Obsidion 650D
Sound Card:	Asus Xonar Essance STX
PSU:	Corsair HX850 Professional Series
Software:	Windows7 Home Premium 64
Benchmarks:	Better then most!

Aug 14, 2008, 12:51 AM	#4
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 18,983 (7.32/day) Thanks: 3,032 Thanked 5,481 Times in 3,947 Posts System Specs	I use orthos and prime myself, but that is odd that OCCT fails, while others dont! __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

Aug 14, 2008, 12:54 AM	#5
a_ump Join Date: Nov 2007 Location: Fairmont, WV Posts: 3,080 (1.54/day) Thanks: 450 Thanked 316 Times in 293 Posts System Specs	i use OCCT all the time, though i'm thking about including sp2004, that's the same as prime isn't it?

System Name:	Boss
Processor:	Core i7-2630QM@2ghz
Motherboard:	laptop
Cooling:	laptop
Memory:	6gb
Video Card:	HD 6770m
Hard Disk:	750gb
Optical Drive:	BD drive
CRT/LCD Model:	15.6" 1360x768
Case:	laptop
Sound Card:	onboard
PSU:	laptop
Software:	Win 7 x64

Aug 14, 2008, 01:10 AM	#7
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 18,983 (7.32/day) Thanks: 3,032 Thanked 5,481 Times in 3,947 Posts System Specs	@ fulinfusion, I can see that as I have had issues with OCCT running on certain systems. I say if prime runs for 12+hours, the OC is fine. @ a_ump....Prime95....http://files.extremeoverclocking.com/file.php?f=103 __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
calculation error	Uptime73	Overclocking & Cooling	3	Aug 5, 2008 07:56 PM
OCCT failed me	hat	General Hardware	6	Jul 25, 2008 09:26 PM
what's the newest version of occt?	hat	General Software	2	Jul 14, 2008 01:09 AM
OCCT test reports stable, but i crash in games	vexen	General Hardware	7	Jul 13, 2008 11:38 AM
New OCCT is available!!	Paulieg	Overclocking & Cooling	0	Mar 3, 2007 12:34 PM