The TPU UK Clubhouse - Page 312

cheesy999 · Jun 24, 2011, 07:49 PM

Quote:

Originally Posted by scaminatrix

You're either very slow, or very funny

very slow at the moment, i'm running 3.2ghz

MightyMission · Jun 24, 2011, 07:50 PM

excellent,!what paste are you going for?
lol sam

cheesy999 · Jun 24, 2011, 07:50 PM

Ohhh, i get it

i'm suffering from a lack of sleep (TPU caused it) , ended up struggling through thursday with a lack of sleep and no food (forgot my lunch/didn't eat breakfast)

MightyMission · Jun 24, 2011, 07:53 PM

bloody hell i need to sub that chew* link,seriously clued up on IC's!
i see a photo of him the other day tuning a bulldozer chip to 7.7ghz i think?

KieranD · Jun 24, 2011, 08:03 PM

Quote:

Originally Posted by MightyMission

kieran,its not a fake,the bottom right of the screeny and the cpu meter gadget thingy show cpu/gpu 2 temps,i was using a chiller at the time,so load temps were -6c cpu (says na on the coretemp but reads fine in bios?!?)...
so y6ea that 20 odd celcius reading was after a couple of hours of gaming with the chiller turned off,just melting the antifreeze..
the cpu-z is an odd one tho as i use CnQ so its should be 1.504v on load and god knows what at 268x4,so i assume its the pic taken when on the cusp of dropping down a p state..
i dont really know but what i do know is that using a chiller enabled some nice OC's while the computer is silent(silent 470s=priceless),but i got condensation under the mobo vrm sink..
dragon skin fx next time!

sorry this waffle took so long i got distracted

Its cool, i never said it was fake i just wondered how you did that. Yes i remember you wanted to change a thermistor on your chiller to get it to go lower. I dont think we could quiet work out the values needed, see im not good with electronics.

MightyMission · Jun 24, 2011, 08:08 PM

Yes,good memory!
In the end i added a link wire,so i basically short circuited the temp cutoff,
and the temps dropped ridiculously but like i said,i didnt insulate the mobo enough so i lost a good OCcer for my sins,
never mind...the mobo only cost a score a couple of years ago

FreedomEclipse · Jun 24, 2011, 08:08 PM

Quote:

Originally Posted by scaminatrix

That's probably because there's a lot of people arguing or asking the same questions every day

Think of him like FreedomEclipse - he won't take sh*t and he's the first person to speak out, but he's a good guy.

Quote:

Originally Posted by cheesy999

it feels like he's been off for a long time due to him being 2 pages back but that was was earlier today

Quote:

Originally Posted by KieranD

He's nothing like freedom, i like freedom. He's easy to have banter with and doesn't act like he knows it all either which is something of a quality i hate in people. I just avoid people like that, not worth my time really.

Quote:

Originally Posted by scaminatrix

I don't want to force an issue or anything but just try to avoid judgement until you've spoken to him or had a run in with him yourself. You never know, the people you've seen him arguing with might be people he's had long standing disputes with.

But, that's your opinion and decision and I respect that

I never knew i was so popular

cheesy999 · Jun 24, 2011, 08:14 PM

Quote:

Originally Posted by FreedomEclipse

I never knew i was so popular

your practically our supreme **** when tatty isn't here

Quote:

Originally Posted by cheesy999

your practically our leader when tatty isn't here

thank you but, i am not worthy of such praise lol

evil ninja edit i see

Quote:

Originally Posted by FreedomEclipse

thank you but, i am not worthy of such praise lol

who changed that?, there's only one mod that visits far as i know and we need someone when he isnt there

i smell sabotage, is this the same guy who shrank my avatar??? SPEAK TO ME!!!

EDITED BACK

NdMk2o1o · Jun 24, 2011, 08:25 PM

What volts you putting through your 2500k man? I find 4.5ghz is easy @ 1.32v anything higher and I need to raise the vcore significantly and tweak other things such as PLL voltage etc

FreedomEclipse · Jun 24, 2011, 08:28 PM

Quote:

Originally Posted by NdMk2o1o

What volts you putting through your 2500k man? I find 4.5ghz is easy @ 1.32v anything higher and I need to raise the vcore significantly and tweak other things such as PLL voltage etc

you talkin to me??

cheesy999 · Jun 24, 2011, 08:31 PM

Quote:

Originally Posted by cheesy999

your practically our supreme **** when tatty isn't here

close enough, i cought you doing it tatty

, its not our fault, what are we sopposed to do for leadership when your not here?

those quotes won't make sense without changing user names / order?

scaminatrix · Jun 24, 2011, 08:34 PM

You just sized your avatar wrong cheesy. Did you just take a screenshot of someone else's avvy or something?

KieranD · Jun 24, 2011, 08:35 PM

Quote:

Originally Posted by cheesy999

your practically our supreme mega ninja when tatty isn't here

Cheesy your arse kissing is making me feel sick

NdMk2o1o · Jun 24, 2011, 08:36 PM

Quote:

Originally Posted by FreedomEclipse

you talkin to me??

Or chewing a brick, either way I lose my teeth?

Yea man talking to you :P

cheesy999 · Jun 24, 2011, 08:38 PM

Quote:

Originally Posted by KieranD

Cheesy your arse kissing is making me feel sick

Was just doing my best to contradict whoever was ninja editing my posts

Quote:

Originally Posted by scaminatrix

You just sized your avatar wrong cheesy. Did you just take a screenshot of someone else's avvy or something?

no, i'm having to get mods to set my avatar as its not uploading properly

thanks erocker

scaminatrix · Jun 24, 2011, 08:39 PM

Quote:

Originally Posted by cheesy999

no, i'm having to get mods to set my avatar as its not uploading properly
thanks erocker

pebkac issue I believe.

cheesy999 · Jun 24, 2011, 08:40 PM

Quote:

Originally Posted by scaminatrix

pebkac issue I believe.

pebkac?

and supreme mega ninja is a low rank in my books, its need 3 adjectives to be good!!!

scaminatrix · Jun 24, 2011, 08:40 PM

http://lmgtfy.com/?q=pebkac+acronym

FreedomEclipse · Jun 24, 2011, 08:41 PM

Quote:

Originally Posted by NdMk2o1o

Or chewing a brick, either way I lose my teeth?

Yea man talking to you :P

ask and ye shall receive

cheesy999 · Jun 24, 2011, 08:42 PM

Quote:

Originally Posted by scaminatrix

http://lmgtfy.com/?q=pebkac acronym

That is one of the best sites i've ever seen

No, its not me doing it, i'm just uploading ordinary jpegs the way normally do, i think its a bug in my browser

FreedomEclipse · Jun 24, 2011, 08:45 PM

Quote:

Originally Posted by cheesy999

i'm just uploading ordinary jpegs the way normally do, i think its a bug in my browser

better not be the new firefox 5 im hearing about

MightyMission · Jun 24, 2011, 08:46 PM

is there a program to find out what chips are hiding under the ram heatspreader? like cpu/gpu-z.

scaminatrix · Jun 24, 2011, 08:48 PM

Quote:

Originally Posted by MightyMission

is there a program to find out what chips are hiding under the ram heatspreader? like cpu/gpu-z.

I don't think there is. I've been asked a few times to pull heatspreaders off my RAM to see what the chips are. I would have thought someone would have chucked a program at me to see if there was one. But, as you know, I'm not a pro

cheesy999 · Jun 24, 2011, 08:49 PM

Quote:

Originally Posted by FreedomEclipse

better not be the new firefox 5 im hearing about

no, i didn't upgrade to that as people i know had a lot of problems related to lag and generally slow speeds, i'm using chrome at the moment

Quote:

Originally Posted by MightyMission

is there a program to find out what chips are hiding under the ram heatspreader? like cpu/gpu-z.

not that i know of

MightyMission · Jun 24, 2011, 08:50 PM

haha you got a world more knowledge than me on the subject mate,i just try brute force stuff and hit it if/when that doesnt work

System Name:	PC
Processor:	Phenom II X4 B55 @3.5ghz
Motherboard:	Asrock 970 extreme3
Memory:	4GB Corsair Vengeance Blue
Video Card:	HD6950
Hard Disk:	128GB SSD 1TB Samsung
Optical Drive:	DVD
CRT/LCD Model:	22" 1920x1080
Case:	Coolermaster 430
PSU:	Thermaltake

System Name:	Prodigy
Processor:	i5 2500K
Motherboard:	AsRock Z77e-ITX
Cooling:	Liquid
Memory:	2x4GB G Skill 2133@9-10-9 28 1T
Video Card:	Zotac GTX 680
Hard Disk:	OCZ M-SATA 120GB/OCZ Petrol 120GB/500GB Seagate
Optical Drive:	yep
CRT/LCD Model:	Samsung 32" HDTV
Case:	BitFenix Prodigy
Sound Card:	Onboard
PSU:	OCZ Elite 500w

Jun 24, 2011, 07:50 PM	#7778
cheesy999 Join Date: Jul 2010 Location: Near Canterbury, uk Posts: 1,889 (1.79/day) Thanks: 634 Thanked 562 Times in 453 Posts System Specs	Ohhh, i get it i'm suffering from a lack of sleep (TPU caused it) , ended up struggling through thursday with a lack of sleep and no food (forgot my lunch/didn't eat breakfast) __________________ “if you run short on cash, theres always that option. dont forget to use vasaline” -Freedomeclipse “Before you complain about lag, think about Jesus. He lagged three days before respawning.” -repman244

System Name:	PC
Processor:	Phenom II X4 B55 @3.5ghz
Motherboard:	Asrock 970 extreme3
Memory:	4GB Corsair Vengeance Blue
Video Card:	HD6950
Hard Disk:	128GB SSD 1TB Samsung
Optical Drive:	DVD
CRT/LCD Model:	22" 1920x1080
Case:	Coolermaster 430
PSU:	Thermaltake

System Name:	Prodigy
Processor:	i5 2500K
Motherboard:	AsRock Z77e-ITX
Cooling:	Liquid
Memory:	2x4GB G Skill 2133@9-10-9 28 1T
Video Card:	Zotac GTX 680
Hard Disk:	OCZ M-SATA 120GB/OCZ Petrol 120GB/500GB Seagate
Optical Drive:	yep
CRT/LCD Model:	Samsung 32" HDTV
Case:	BitFenix Prodigy
Sound Card:	Onboard
PSU:	OCZ Elite 500w

Jun 24, 2011, 07:50 PM	#7777
MightyMission Join Date: Mar 2011 Posts: 227 (0.29/day) Thanks: 127 Thanked 119 Times in 110 Posts System Specs	excellent,!what paste are you going for? lol sam

Jun 24, 2011, 07:53 PM	#7779
MightyMission Join Date: Mar 2011 Posts: 227 (0.29/day) Thanks: 127 Thanked 119 Times in 110 Posts System Specs	bloody hell i need to sub that chew* link,seriously clued up on IC's! i see a photo of him the other day tuning a bulldozer chip to 7.7ghz i think?

Processor:	Intel i5 2500k 4ghz
Motherboard:	Asrock Z68 Extreme 3 Gen 3
Cooling:	Phanteks ph-tc14pe, MX-4 Paste
Memory:	2x4gb 1600mhz CL9 1.5v G.Skill
Video Card:	VTX3D AMD 6850 (850mhz Core 1150mhz mem stock voltage)
Hard Disk:	OCZ Agility 3 SSD 120gb, Samsung F1 750gb, Seagate 7200.14 2tb
Optical Drive:	ASUS DRW-24B5ST
CRT/LCD Model:	Ilyama ProLite X2377HDS (IPS), Panasonic 41" ST50B
Case:	Nanoxia Deep Silence 2
Sound Card:	Realtek onbaord, Logitech X540 speakers, Superlux 668B headphones.
PSU:	Corsair TX650w
Software:	Windows 7 Professional 64bit

Jun 24, 2011, 08:08 PM	#7781
MightyMission Join Date: Mar 2011 Posts: 227 (0.29/day) Thanks: 127 Thanked 119 Times in 110 Posts System Specs	Yes,good memory! In the end i added a link wire,so i basically short circuited the temp cutoff, and the temps dropped ridiculously but like i said,i didnt insulate the mobo enough so i lost a good OCcer for my sins, never mind...the mobo only cost a score a couple of years ago

System Name:	Codename: Rapture X {MoonPig Edition}
Processor:	Intel 3930k@4.6Ghz
Motherboard:	Asus P9X79 PRO
Cooling:	Corsair H80i {2xScythe G.T AP-15}
Memory:	16GB DDR3 Kingston Hyper X 2133Mhz {4x4GB}
Video Card:	2xMSI GTX680 Twin Frozr OC {SLi}
Hard Disk:	256GB Plextor M5 Pro Xtreme (Boot) \|WD: 2x1.5TB FAEX\|1x2TB EARS\|1x1.5TB Samsung F4EG
Optical Drive:	N/A
CRT/LCD Model:	NEC MultiSync EA231WMi 23" {Black}
Case:	Fractal Define XL {3x140mm,1x180mm Silverstone A.P'}
Sound Card:	Creative SB Z {Speakers: Logitech Z-5500 }
PSU:	Corsair HX1050 Bro'fessional
Software:	Windows 7 7600 x64
Benchmarks:	(╯°□°）╯︵ ┻━┻

Jun 24, 2011, 08:25 PM	#7784
NdMk2o1o Join Date: Apr 2010 Location: Redditch, Worcestershire, England Posts: 2,641 (2.35/day) Thanks: 332 Thanked 857 Times in 604 Posts System Specs	What volts you putting through your 2500k man? I find 4.5ghz is easy @ 1.32v anything higher and I need to raise the vcore significantly and tweak other things such as PLL voltage etc __________________ Bioshock Infinite, FC3, Crysis 3, Shogun 2, Dirt Showdown AMD bundle keys for sale: http://www.techpowerup.com/forums/sh...d.php?t=182837

System Name:	Sandybollocks ///// Brazos balls
Processor:	i5 2500K @4.6Ghz ///// AMD E450 1.65Ghz
Motherboard:	Gigabyte GA-Z68x-UD3H/////Laptop
Cooling:	Noctua - NH-U12P SE2/////Laptop
Memory:	Gskill RipJaws 8Gb 1600mhz @2133/////4GB 1333
Video Card:	Sapphire Vapor-X 7950///// AMD HD6320
Hard Disk:	Corsair Force 3 240GB / Seagate Barracuda XT 2Tb/////500GB
Optical Drive:	Samsung Blu-Ray/////DVD-RW
CRT/LCD Model:	Catleap 2560x1440 27" ///// 15.5" 1366x768
Case:	CM Storm Sniper Black Edition/////Laptop
Sound Card:	AKG K-701 phones & Audinst HUD-MX1
PSU:	OCZ Fatal1ty 750w/////65w power brick
Software:	Win 7 x64 Home Premium
Benchmarks:	Eats all my games ///// it plays games

Jun 24, 2011, 08:34 PM	#7787
scaminatrix Join Date: Mar 2010 Location: By the Channel Tunnel, Kent, England Posts: 2,432 (2.07/day) Thanks: 1,834 Thanked 802 Times in 672 Posts System Specs	You just sized your avatar wrong cheesy. Did you just take a screenshot of someone else's avvy or something? __________________ MKMods Tribute Rig - the Power of the Community HeatWare Did I make the 2,000,000th post? If an 8 Core can hit 6Ghz with an H100 i'll post pictures of my hot fiance - Pestilence Every day I come to this site, I am reminded why I come to this site every day!!! - Iggster

System Name:	Benny
Processor:	Phenom II 1055t @ 3.3GHz; 300x11; 1.380v; NB 2700; HT 2400
Motherboard:	ASUS Crosshair IV Formula (2002 BIOS)
Cooling:	Thermalright TRUE 120 Black + 2 Xilence Red Wing PWM 120mm (push/pull) + polycarbonate fan holders
Memory:	8GB GeIL Ultra 2133MHZ C9 running at 1600MHz @ 7-7-7-21 1T 1.5v
Video Card:	MSI Twin Frozr II GTX470 @ Stock w/CPU fan cable-tied on, as one of the GPU fans broke.
Hard Disk:	60GB OCZ Agility3 (OS);500GB WDC Grn;4x80GB(RAID0);1x1TB WDC Blk (Backup) + Jye-Jou ST-3141SS
Optical Drive:	Optiarc SATA DVD-RWDL Bla Bla
CRT/LCD Model:	ASUS PA823Q
Case:	Silverstone Raven 2 (all cables custom sleeved with velcro mod on side panel...)
Sound Card:	X-Fi (Onboard) + Technics SA-GX530 amp powering JVC HA-RX700's with Zalman mic
PSU:	Corsair HX650W
Software:	Win7 Pro x64
Benchmarks:	I've scratched my name into all the benches in my local park. Using Corsair M90, soon to be using Lo

Jun 24, 2011, 08:40 PM	#7793
scaminatrix Join Date: Mar 2010 Location: By the Channel Tunnel, Kent, England Posts: 2,432 (2.07/day) Thanks: 1,834 Thanked 802 Times in 672 Posts System Specs	http://lmgtfy.com/?q=pebkac+acronym __________________ MKMods Tribute Rig - the Power of the Community HeatWare Did I make the 2,000,000th post? If an 8 Core can hit 6Ghz with an H100 i'll post pictures of my hot fiance - Pestilence Every day I come to this site, I am reminded why I come to this site every day!!! - Iggster

Jun 24, 2011, 08:46 PM	#7797
MightyMission Join Date: Mar 2011 Posts: 227 (0.29/day) Thanks: 127 Thanked 119 Times in 110 Posts System Specs	is there a program to find out what chips are hiding under the ram heatspreader? like cpu/gpu-z.

Jun 24, 2011, 08:50 PM	#7800
MightyMission Join Date: Mar 2011 Posts: 227 (0.29/day) Thanks: 127 Thanked 119 Times in 110 Posts System Specs	haha you got a world more knowledge than me on the subject mate,i just try brute force stuff and hit it if/when that doesnt work

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The American TPU Clubhouse.	TheMailMan78	techPowerUp! Club Forum	514	Dec 27, 2011 03:01 PM
TPU HOMEFRONT clubhouse	overclocking101	techPowerUp! Club Forum	53	Apr 18, 2011 12:44 PM
TPU Xfire Clubhouse	Killer_Rubber_Ducky	techPowerUp! Club Forum	0	Jan 20, 2011 07:04 PM
The TPU Gun Owners Clubhouse	ShiBDiB	techPowerUp! Club Forum	4	Dec 30, 2010 10:03 PM
The Official TPU Pink Floyd Clubhouse!	russianboy	techPowerUp! Club Forum	17	Jun 11, 2008 04:09 PM