Monitor not working on HD4850 Possible RMA candidate

crazy pyro · Dec 25, 2008, 01:29 PM

It was working for the last few days, however it just stopped working when I switched it over to my dad's rig and back, however the right hand port on the graphics card works fine, no idea what's happened, I'm guessing it needs to be RMAed but I'm not sure, what do you guys think?

crazy pyro · Dec 26, 2008, 08:18 PM

Bumpity Bump

spearman914 · Dec 26, 2008, 08:23 PM

Well if it worked on the right port. Then the other port is a bad one. So it's not the cards fault.

erocker · Dec 26, 2008, 08:27 PM

Only one port displays a signal. So what's the problem?

crazy pyro · Dec 26, 2008, 10:07 PM

I'd like to have two monitors hence the question, it's just that the left hand one worked before and now it's stopped working (I hadn't checked the right hand one).

erocker · Dec 26, 2008, 10:10 PM

Check all of your settings in CCC?

crazy pyro · Dec 26, 2008, 10:14 PM

Ok, sure I'm a complete newb with the settings, might have changed something accidentally when I was looking through before my dad needed the monitor.
If my dad would clear his desk of course then I could have my decent monitor on and he could have his crappy one but yeah, a pile of stuff is on the desk so no nice monitor for me.

Woody112 · Dec 26, 2008, 10:36 PM

In CCC go to display manager click on displays properties. On the right hand side you will see two boxes one with the number 1 in it, and one with a number 2 in it. right click on the box with a 2 and enable the second display. If that don't work do the same thing with the other box.
Hopefully this will solve your problem...

crazy pyro · Dec 27, 2008, 05:39 PM

Right, thanks, get the response I needed and the desktop's 30 miles away, oh well. I'll check if it's working.

Dec 25, 2008, 01:29 PM	#1
crazy pyro Join Date: Jun 2008 Location: Newcastle Posts: 1,304 (0.72/day) Thanks: 290 Thanked 137 Times in 121 Posts System Specs	Monitor not working on HD4850 Possible RMA candidate It was working for the last few days, however it just stopped working when I switched it over to my dad's rig and back, however the right hand port on the graphics card works fine, no idea what's happened, I'm guessing it needs to be RMAed but I'm not sure, what do you guys think? __________________ Lappy: AMD athlon/ turion TK-53 2GB Crucial RAM@667 512MB Generic@667 Acer travelmate motherboard, unsure, Liteon laptop Power supply,ATI mobility Radeon, x1250,120GB HD “Testicles and birthday presents yum!” -joinmeindeath417

System Name:	The neighbour of the beast\|NC10
Processor:	Q6600 GO\|Atom N270
Motherboard:	Asus P5QSE/R
Cooling:	Stock\|Stock
Memory:	4GB Crucial Ballistix Tracer Red @800\|1GB@533
Video Card:	Palit HD4850\|Intel GMA 945
Hard Disk:	Maxtor 500GB 32 MB Cache\|160GB IDE 2.5"
Optical Drive:	Samsung 20* DVD-RW drive\|CnM external
CRT/LCD Model:	15.4" touchscreen, 15.4" Digimate LCD\| 10.2"
Case:	Coolermaster Elite 330\|Black NC10 case
Sound Card:	Realtek HD audio\|Integrated
PSU:	Corsair 650W TX\|6 Cell battery
Software:	Vista Home Premium, Win 7\| Win XP
Benchmarks:	Benches will be taken on the main rig soon. (AKA never)

Dec 26, 2008, 08:18 PM	#2
crazy pyro Join Date: Jun 2008 Location: Newcastle Posts: 1,304 (0.72/day) Thanks: 290 Thanked 137 Times in 121 Posts System Specs	Bumpity Bump __________________ Lappy: AMD athlon/ turion TK-53 2GB Crucial RAM@667 512MB Generic@667 Acer travelmate motherboard, unsure, Liteon laptop Power supply,ATI mobility Radeon, x1250,120GB HD “Testicles and birthday presents yum!” -joinmeindeath417

System Name:	The neighbour of the beast\|NC10
Processor:	Q6600 GO\|Atom N270
Motherboard:	Asus P5QSE/R
Cooling:	Stock\|Stock
Memory:	4GB Crucial Ballistix Tracer Red @800\|1GB@533
Video Card:	Palit HD4850\|Intel GMA 945
Hard Disk:	Maxtor 500GB 32 MB Cache\|160GB IDE 2.5"
Optical Drive:	Samsung 20* DVD-RW drive\|CnM external
CRT/LCD Model:	15.4" touchscreen, 15.4" Digimate LCD\| 10.2"
Case:	Coolermaster Elite 330\|Black NC10 case
Sound Card:	Realtek HD audio\|Integrated
PSU:	Corsair 650W TX\|6 Cell battery
Software:	Vista Home Premium, Win 7\| Win XP
Benchmarks:	Benches will be taken on the main rig soon. (AKA never)

Dec 26, 2008, 08:23 PM	#3
spearman914 Join Date: Apr 2008 Location: Brooklyn, New York 11223 Posts: 3,000 (1.59/day) Thanks: 339 Thanked 510 Times in 482 Posts System Specs	Well if it worked on the right port. Then the other port is a bad one. So it's not the cards fault. __________________ .................................................. .. “Originally Posted by mlee49 So pain level on a 1 to 10 scale, 10 being having a wart removed on your butthole with pliers.”

System Name:	Mine \| Dad + Mom
Processor:	E8500 E0 Wolfdale @ 4.6GHz 1.5V \| E2180 M0 Allendale @ 3.0GHz 1.3V
Motherboard:	Asus Maximus Formula (X48) w/ Rampage BIOS \| Asus P5Q Pro (P45)
Cooling:	Xigmatek Rifle HDT-S1283 w/ SFF21F Fan \| Arctic Cooling Freezer 7 Pro
Memory:	G.Skill Pi Black 2x2GB 1.02GHz CL5 \| OCZ Reaper 2x2GB 1.05GHz CL5
Video Card:	Sapphire 4870X2 2GB 820/1020MHz \| Sapphire 4850 1GB 700/1100MHz
Hard Disk:	WD VR 150GB 10K RPM + WD 500GB 7.2K RPM \| WD 200GB 7.2K RPM
Optical Drive:	Samsung Black DVD Burner \| Lite-On Black DVD Burner w/ Lightscribe
CRT/LCD Model:	Acer P243WAID 24" 1920x1200 LCD \| Acer V193W 19" 1440x900 LCD
Case:	Cooler Master HAF 932 Full-Tower \| Antec Twelve Hundred Mid-Tower
Sound Card:	Fatal1ty Xtreme Gamer w/ Z-5500 5.1 \| On-Board Audio w/ S-220 2.1
PSU:	PC Power and Cooling 750W Non-Modular \| Corsair HX-520W Modular
Software:	Windows Vista Home Premium X64 \| Windows Vista Home Premium X64
Benchmarks:	Not Wasting Time!

Dec 26, 2008, 08:27 PM	#4
erocker Senior Moderator Join Date: Jul 2006 Location: Milwaukee, WI. Posts: 32,292 (12.78/day) Thanks: 2,817 Thanked 12,452 Times in 7,918 Posts System Specs	Only one port displays a signal. So what's the problem? __________________

Processor:	Intel i7 3770K @ 4.6ghz 1.256v
Motherboard:	Asus Maximus V Formula
Cooling:	Water
Memory:	2x4gb Patriot Viper 2133mhz 10-11-10-25 2T 1.55v
Video Card:	Sapphire HD 7970 1125/1575 1.14v
Hard Disk:	Crucial M4 128Gb / Corsair Force 3 120Gb / Samsung 240Gb / 2Tb Seagate
Optical Drive:	None
CRT/LCD Model:	Acheiva Shimian 27" IPS 2560x1440
Case:	Corsair 500R White
Sound Card:	Onboard
PSU:	NZXT Hale90 1Kw
Software:	Windows 8 x64

Dec 26, 2008, 10:07 PM	#5
crazy pyro Join Date: Jun 2008 Location: Newcastle Posts: 1,304 (0.72/day) Thanks: 290 Thanked 137 Times in 121 Posts System Specs	I'd like to have two monitors hence the question, it's just that the left hand one worked before and now it's stopped working (I hadn't checked the right hand one). __________________ Lappy: AMD athlon/ turion TK-53 2GB Crucial RAM@667 512MB Generic@667 Acer travelmate motherboard, unsure, Liteon laptop Power supply,ATI mobility Radeon, x1250,120GB HD “Testicles and birthday presents yum!” -joinmeindeath417

Dec 26, 2008, 10:10 PM	#6
erocker Senior Moderator Join Date: Jul 2006 Location: Milwaukee, WI. Posts: 32,292 (12.78/day) Thanks: 2,817 Thanked 12,452 Times in 7,918 Posts System Specs	Check all of your settings in CCC? __________________

Dec 26, 2008, 10:14 PM	#7
crazy pyro Join Date: Jun 2008 Location: Newcastle Posts: 1,304 (0.72/day) Thanks: 290 Thanked 137 Times in 121 Posts System Specs	Ok, sure I'm a complete newb with the settings, might have changed something accidentally when I was looking through before my dad needed the monitor. If my dad would clear his desk of course then I could have my decent monitor on and he could have his crappy one but yeah, a pile of stuff is on the desk so no nice monitor for me. __________________ Lappy: AMD athlon/ turion TK-53 2GB Crucial RAM@667 512MB Generic@667 Acer travelmate motherboard, unsure, Liteon laptop Power supply,ATI mobility Radeon, x1250,120GB HD “Testicles and birthday presents yum!” -joinmeindeath417

Dec 26, 2008, 10:36 PM	#8
Woody112 Join Date: Jan 2008 Location: Florida Posts: 531 (0.27/day) Thanks: 80 Thanked 80 Times in 73 Posts System Specs	In CCC go to display manager click on displays properties. On the right hand side you will see two boxes one with the number 1 in it, and one with a number 2 in it. right click on the box with a 2 and enable the second display. If that don't work do the same thing with the other box. Hopefully this will solve your problem...

System Name:	Woody's MBP
Processor:	2.4 C2D
Cooling:	Frikin Air
Memory:	Munskin 2x2 gig 1066mhz
Video Card:	9400gt/9600gt W/512mb
Hard Disk:	1TB WD scorpio blue
Optical Drive:	External BD-ROM Internal DVD RW
CRT/LCD Model:	15.4" on lapie/ 24" Acer P241w on the wall/ 52" LCD TV
Software:	OSX/ Win 7

Dec 27, 2008, 05:39 PM	#9
crazy pyro Join Date: Jun 2008 Location: Newcastle Posts: 1,304 (0.72/day) Thanks: 290 Thanked 137 Times in 121 Posts System Specs	Right, thanks, get the response I needed and the desktop's 30 miles away, oh well. I'll check if it's working. __________________ Lappy: AMD athlon/ turion TK-53 2GB Crucial RAM@667 512MB Generic@667 Acer travelmate motherboard, unsure, Liteon laptop Power supply,ATI mobility Radeon, x1250,120GB HD “Testicles and birthday presents yum!” -joinmeindeath417

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HD4850 modded bios working with cat 8.8!	steve30x	RBE	56	Oct 7, 2008 11:09 PM
GECUBE Unleashes HD4850 1.0GB Overlocking Series	malware	News	6	Aug 28, 2008 04:01 PM
Asus a8n32 back from rma and not working	Boneface	Motherboards & Memory	6	Oct 29, 2006 01:32 AM