The AMD Phenom II OC'ers Club

[Velvet Wafer]

Originally Posted by fullinfusion

heres mine atm Validated

http://img.techpowerup.org/110113/samenbht.png

i wish i would have validated mine that high
well fullinfusion, youre always concurring CDA, but guys, what clocks are linpack stable on both of your procs? i like valids and screens, but i miss the 50 runs finished window
have you thought about using lower latencies and lower memclocks? can bring improved IMC stability, and was faster in my case!

@CDA
hopefully the other proc works out better CDA, i think this one here hasnt satisfied you really

[fullinfusion]

Originally Posted by Velvet Wafer

i wish i would have validated mine that high
well fullinfusion, youre always concurring CDA, but guys, what clocks are linpack stable on both of your procs? i like valids and screens, but i miss the 50 runs finished window

lol, Cd and I like to see who can pee the furthest

Sorry for the low memory in my last posting. I for got to set it on the last boot. CD knows im not a windows fan to see how high I can clock. I do it in the bios till it boots and runs stable.

[Velvet Wafer]

Originally Posted by fullinfusion

lol, Cd and I like to see who can pee the furthest

Sorry for the low memory in my last posting. I for got to set it on the last boot. CD knows im not a windows fan to see how high I can clock. I do it in the bios till it boots and runs stable.

http://img.techpowerup.org/110113/sry.png

nice, does it run completely stable?

[fullinfusion]

Originally Posted by Velvet Wafer

nice, does it run completely stable?

Cant say atm. Im running a few Mark11 runs... the clock is still being tinkered with.

[fullinfusion]

Originally Posted by cdawall

* CPU Model: AMD Phenom II X6 1090T
* CPU Stepping: CCBBE CB 1013CPMW
* CPU Frequency: 4579.8 MHz
* CPU vCore: 1.55V
* CPU Multiplier: 21.5x
* CPU Turbo: Disabled
* CPU NB Speed: 2982 MHz
* HT Ref Speed: 213 MHz
* RAM Speed: DDR3-1704
* RAM Timings: 7-7-7-20-20-1T
* RAM Configuration: 2 x 2GB
* RAM vDIMM: 2.14V
* Motherboard: ASUS Crosshair III Formula
* Chipset/Socket: 790FX + SB750, AM3
* Cooling: Water (Fuzion V1)
* Temps: 20C Idle / 40C Load
* Operating System: Windows 7
* 32/64-Bit: 64
* Stable/Suicide/Untested: Untested
http://img.techpowerup.org/100619/15...%204582mhz.png

just about caught ya CD

Valid

[cdawall]

Originally Posted by Velvet Wafer

nice, does it run completely stable?

only got one chip in the house that i leave at a 100% linx stable clock and thats a i3 560ES@4.2ghz 1.3v in my HTPC my AMD stuff i clock high enough that i can run benchmarks and thats really all i use them for when i get a gaming rig setup and running i will have a linopack stable clock for it until then i am happy not to crash all the time in windows

Originally Posted by fullinfusion

just about caught ya CD

Valid

you should beat me thats a release day batch yours is way down the line from me

[fullinfusion]

Originally Posted by cdawall

only got one chip in the house that i leave at a 100% linx stable clock and thats a i3 560ES@4.2ghz 1.3v in my HTPC my AMD stuff i clock high enough that i can run benchmarks and thats really all i use them for when i get a gaming rig setup and running i will have a linopack stable clock for it until then i am happy not to crash all the time in windows

Im about the same way. I just clock for numbers and down clock to around 3.4ghz for gaming and every day tasks. The NB however is clocked to 3GHz and the memory is high and tight

[cdawall]

Originally Posted by fullinfusion

Im about the same way. I just clock for numbers and down clock to around 3.4ghz for gaming and every day tasks. The NB however is clocked to 3GHz and the memory is high and tight

my last true stable 24/7 clock was my RB-C1 phenom 945BE ES and it was 3.9x and 1.7v folding 3D cad work it did it all never missed a beat either




chip 2 is less stable fucking POS wont stay stable at 355HTT

[fullinfusion]

Originally Posted by cdawall

my last true stable 24/7 clock was my RB-C1 phenom 945BE ES and it was 3.9x and 1.7v folding 3D cad work it did it all never missed a beat either




chip 2 is less stable fucking POS wont stay stable at 355HTT

Nice and LMAO!!! thats a POS cpu? Hahahahaha.... I know some ppl here that give there left nut for it.

[cdawall]

Originally Posted by fullinfusion

Nice and LMAO!!! thats a POS cpu? Hahahahaha.... I know some ppl here that give there left nut for it.

played with the ram and ummm temps and now she is at 365HTT on chip 2

[fullinfusion]

Originally Posted by cdawall

played with the ram and ummm temps and now she is at 365HTT on chip 2

you mean the HT link speed is 3650MHz? or ya talking bus speed

[cdawall]

Originally Posted by fullinfusion

you mean the HT link speed is 3650MHz? or ya talking bus speed

bus speed its 370 now actually for 4255mhz

[fullinfusion]

Originally Posted by cdawall

bus speed its 370 now actually for 4255mhz

Ah these boards are good for 400HTT + speeds...

Now look at this, kinda fucked imo! look at my clocks and the cpu voltage... Am I on to something? Does this chip like high clocks but at lower volts? I had a 6400 Black that was the same... Im encoding, playing a muz vid and stable! what gives

[cdawall]

whats low voltage?

[fullinfusion]

Originally Posted by cdawall

whats low voltage?

1.368v /whats stock volts on the 1090T's?

[cdawall]

Originally Posted by fullinfusion

1.368v /whats stock volts on the 1090T's?

i cant remember the stock volts but that is low volts kinda sucks though means that chip wont win a high clock award

[cdawall]

not to bad

[fullinfusion]

Originally Posted by cdawall

i cant remember the stock volts but that is low volts kinda sucks though means that chip wont win a high clock award

Na I think it will... I just need time to find the volt the chip loves...it will run 1.6v but more stable at 1.52ish if ya get what im saying.

[fullinfusion]

Originally Posted by cdawall

http://valid.canardpc.com/cache/screenshot/1593484.png

http://valid.canardpc.com/cache/banner/1593484.png

not to bad

Not bad at all.... those little suckers clock well

[YautjaLord]

Originally Posted by Velvet Wafer

dont even think about it, Xan!
That would be your third or fourth try, right?
I guess when CDA had your Rig in his hands, he would torture it to 4.5 on 1.4 or so

but anyways good luck with that!

I'll try to be gentle with this CPU i have. 3rd/4th try : i don't remember, guess i did had one drink too many in my life. And bout CD having this rig ? Only when Bulldozer & AM3+ mobos will be released, if i'll sell to CD it in 1st place. Thanx.

Originally Posted by cdawall

VenX is overpriced get an H50 or H70 run two fans on it and see were it will sit stable

http://www.overclockers.com/thermalr...omousx-review/

or just build a custom loop like the swifty. 4.2ghz is possible i would see closer to 1.45-1.47v the venX might be enough to do it or you chip might just suck C3 doesn't mean everything like this stupid C3 regor thing i have wont go over a 35X bus and its pissing me off.

Gotta read this review in few more hours - 5am in a morning in Israel & i almost forgot i do need to sleep.

Thanx, dude. On Feb 10 or so, i'll raise the clock up a 4.0/4.1GHz 1.4v bit. Keep headbanging, you all.

[cdawall]

Originally Posted by fullinfusion

Na I think it will... I just need time to find the volt the chip loves...it will run 1.6v but more stable at 1.52ish if ya get what im saying.

thing i have learned is the chips that are stable at lower voltage cant handle "high" voltages which leaves them out for the 5-6-7ghz chips the old twkr chips were high leakage chips and handled higher volts better than other chips

Originally Posted by fullinfusion

Not bad at all.... those little suckers clock well

thats about 8C socket temp it started to freeze my lines up so i killed it

Originally Posted by xanlord

I'll try to be gentle with this CPU i have. 3rd/4th try : i don't remember, guess i did had one drink too many in my life. And bout CD having this rig ? Only when Bulldozer & AM3+ mobos will be released, if i'll sell to CD it in 1st place. Thanx.

i have always been gentle to chips ask anyone here only killed a couple of them...

[fullinfusion]

Originally Posted by cdawall

thing i have learned is the chips that are stable at lower voltage cant handle "high" voltages which leaves them out for the 5-6-7ghz chips the old twkr chips were high leakage chips and handled higher volts better than other chips



thats about 8C socket temp it started to freeze my lines up so i killed it




i have always been gentle to chips ask anyone here only killed a couple of them...

Socket temp? im at 10c myself but what ya mean started to freeze? got a pix of your cooling?

[cdawall]

Originally Posted by fullinfusion

Socket temp? im at 10c myself but what ya mean started to freeze? got a pix of your cooling?

it was outside lol its 20F outside so yea thats why she froze

[fullinfusion]

Originally Posted by cdawall

it was outside lol its 20F outside so yea thats why she froze

PFffttt! -7c ! thats still shorts weather lol. Ima going to take mine out for the hell of it maybe tomorrow or sunday if I dont work... Sunday is going to be -32c ... Atm its -19c

Typical American! Im thinking you, yourself got cold and moved back inside blaming the water starting to freeze!

Dont BS me CD! I've froze my lines when the system was off...



And that was -5c in the room that morning. With the system running I've had no problem with icing *freezing* at -10c or 14f...

[Radical_Edward]

At that point I would have put antifreeze in my loop.