TPU's WCG/BOINC Team - Page 578

mjkmike · Feb 4, 2012, 04:16 PM

Quote:

Originally Posted by KieX

Remembering your past posts about casino trips, I'd say that's a good thing to keep doing

Congrats on quitting smoking, that's always difficult.

Now... pics!

No pics. Its a mess but i do have this.

Started crunching for the team just now.

KieX · Feb 4, 2012, 07:17 PM

Quote:

Originally Posted by mjkmike

No pics. Its a mess but i do have this.

http://img.techpowerup.org/120204/Capture2.png

Started crunching for the team just now.

Very nice, probably do around 10K ppd with that. What volts/cooling are you using?

Chicken Patty · Feb 4, 2012, 07:48 PM

Quote:

Originally Posted by Mydog

I belive I had a close call during the night

Left a window in the cruncher room with a slightly to big opening, during the knight the temps dropped to -20C

. Roomtemp was 8C when I got up this morning and the two SR-2's had watertemps of 3,6C and 7,8C, luckily no leaks.

Thank god! damn coolant didn't freeze up?

Feb 4, 2012, 08:07 PM

I couldn't figure out why the temps would be a problem since I leave my car out all winter. Then I realized wc guys probably use something other than antifreeze in their loops.

Mydog · Feb 4, 2012, 08:29 PM

Quote:

Originally Posted by twilyth

I couldn't figure out why the temps would be a problem since I leave my car out all winter. Then I realized wc guys probably use something other than antifreeze in their loops.

I've tried with the radiator outside during winter and with atifreeze in the loop but just got ice everywhere due to poor insulation.

mjkmike · Feb 4, 2012, 10:23 PM

Quote:

Originally Posted by KieX

Very nice, probably do around 10K ppd with that. What volts/cooling are you using?

H100 push pull. Volts @ 1.375. Temp 54.C

Mydog · Feb 4, 2012, 10:28 PM

Nice temps

Sensor1: Water in to radaitor
Sensor2: Water leaving radiator
Sensor3: Airtemp bottom of case
Sensor4: Airtemp topp of case just below radiator

1,41 vcore on CPU1 and 1,39 vcore on CPU2

KieX · Feb 5, 2012, 02:46 AM

Quote:

Originally Posted by mjkmike

H100 push pull. Volts @ 1.375. Temp 54.C

Nice temps. That's like 10C less for 200MHz more than mine. Can't push/pull on my case though

Quote:

Originally Posted by Mydog

Nice temps

Sensor1: Water in to radaitor
Sensor2: Water leaving radiator
Sensor3: Airtemp bottom of case
Sensor4: Airtemp topp of case just below radiator
http://img.techpowerup.org/120204/aqua.jpg

1,41 vcore on CPU1 and 1,39 vcore on CPU2

That's just sweet

mjkmike · Feb 5, 2012, 03:03 AM

My new rig is on the box it came in.

TacoTown · Feb 5, 2012, 03:04 AM

Quote:

Originally Posted by mjkmike

My new rig is on the box it came in.

Pics please

mjkmike · Feb 5, 2012, 03:10 AM

No camera at home. left it at brothers.

If and or when it gets moved to a case I will post pics.

KieX · Feb 5, 2012, 03:45 PM

Been having lots of weird problems with my rigs past few days. Total output halved, RAC dropping all the time..

Had some which weren't CPU loading 100%, others that weren't receiving new work and the dedicated CEP2 rigs kept restarting the WU's.

Installed BoincView and keeping an eye on them more closely, re-ran benchmarks and even re-installed some clients.

I think they should be all sorted out, but full output might take a few days to recover. Fingers crossed.

Chicken Patty · Feb 5, 2012, 05:22 PM

Quote:

Originally Posted by KieX

Been having lots of weird problems with my rigs past few days. Total output halved, RAC dropping all the time..

Had some which weren't CPU loading 100%, others that weren't receiving new work and the dedicated CEP2 rigs kept restarting the WU's.

Installed BoincView and keeping an eye on them more closely, re-ran benchmarks and even re-installed some clients.

I think they should be all sorted out, but full output might take a few days to recover. Fingers crossed.

Damn dude, that's crazy, all falling apart at once.

Keep us posted.

ThE_MaD_ShOt · Feb 5, 2012, 06:04 PM

I am now crunching for WGC. Ought to put up some decent numbers as I have devoted 3 rigs to it.

stinger608 · Feb 5, 2012, 06:42 PM

Quote:

Originally Posted by ThE_MaD_ShOt

I am now crunching for WGC. Ought to put up some decent numbers as I have devoted 3 rigs to it.

Awesome man!!!!!!!!! Welcome aboard

ThE_MaD_ShOt · Feb 5, 2012, 07:32 PM

Now how do I get the wcg cruncher sig thingy? The one I have should update itself to reflect Wcg once it does a dump. Which ought to be in about 40 mins or so. Wow Wcg goes through packets pretty fast. I'm used to seti which can take hours to days to complete packets. Got to get used to this right at 2 hour thing.

mstenholm · Feb 5, 2012, 07:51 PM

Quote:

Originally Posted by ThE_MaD_ShOt

Now how do I get the wcg cruncher sig thingy?.

That you have to earn...100.000 points and its yours if you fill the right places in your User CP (Miscellaneous Options to be excact)

Mydog · Feb 5, 2012, 07:54 PM

Quote:

Originally Posted by mstenholm

That you have to earn...100.000 points and its yours if you fill the right places in your User CP (Miscellaneous Options to be excact)

Then why do I not have it????

ThE_MaD_ShOt · Feb 5, 2012, 07:54 PM

Quote:

Originally Posted by mstenholm

That you have to earn...100.000 points and its yours if you fill the right places in your User CP (Miscellaneous Options to be excact)

100 points that shouldn't take to long. I already filled in the wcg cruncher part with my user name under cp options

mstenholm · Feb 5, 2012, 08:03 PM

It was a europan . not an amerian. 100K.

stinger608 · Feb 5, 2012, 08:04 PM

Quote:

Originally Posted by ThE_MaD_ShOt

100 points that shouldn't take to long. I already filled in the wcg cruncher part with my user name under cp options

No it's 100,000 not 100.

mstenholm · Feb 5, 2012, 08:05 PM

Quote:

Originally Posted by Mydog

Then why do I not have it????

Upper/lower case? I asume that you did fill out the right box (minhund)

ThE_MaD_ShOt · Feb 5, 2012, 08:07 PM

Quote:

Originally Posted by stinger608

No it's 100,000 not 100.

That may take a little while. lol

Mydog · Feb 5, 2012, 08:11 PM

Quote:

Originally Posted by mstenholm

Upper/lower case? I asume that you did fill out the right box (minhund)

So we're clear, it's user CP on this forum right? And I'm talking about the WCG thingy you got in the lower right corner of your sig.

Sorry I think I got it now

Edit: Yepp I did

mstenholm · Feb 5, 2012, 08:33 PM

^^

Processor:	just a few i7's all AMD's gone to friends
Motherboard:	Mother F%#@& am I board
Cooling:	It's called Alberta Canada.
Memory:	Don't remember.
Video Card:	Hope for blckjack
Hard Disk:	hurt my toe's when droped
Optical Drive:	need new glasses
CRT/LCD Model:	never big enough
Case:	I think they call it a lost case
Sound Card:	What speek up I'm old.
PSU:	Good old coffee
Software:	when you get this old everything is soft
Benchmarks:	Always on the bench never on the field.

System Name:	Slick
Processor:	Intel i5 2467M
Motherboard:	Samsung Series 5 Ultrabook
Memory:	8GB Corsair Value
Hard Disk:	Crucial M4 7mm 256GB
CRT/LCD Model:	13"
Software:	Windows 8 Pro x64

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

System Name:	Cruncher and Gamer
Processor:	i7 3960X @4,8GHz
Motherboard:	Rampage IV Extreme
Cooling:	Apogee HD Limited Edition CPU-block, EK GPU-blocks
Memory:	12GB Corsair Dominator Platinum 2400MHz CL9
Video Card:	2x Radeon HD 7970
Hard Disk:	2x 180GB Intel 330
Optical Drive:	N/A Don't need it
CRT/LCD Model:	3x Samsung syncmaster T240 Res 5760x1200
Case:	?
Sound Card:	Onboard
PSU:	Antec 1200W TPQ
Software:	Win 7 64 bits

Processor:	just a few i7's all AMD's gone to friends
Motherboard:	Mother F%#@& am I board
Cooling:	It's called Alberta Canada.
Memory:	Don't remember.
Video Card:	Hope for blckjack
Hard Disk:	hurt my toe's when droped
Optical Drive:	need new glasses
CRT/LCD Model:	never big enough
Case:	I think they call it a lost case
Sound Card:	What speek up I'm old.
PSU:	Good old coffee
Software:	when you get this old everything is soft
Benchmarks:	Always on the bench never on the field.

Feb 4, 2012, 08:07 PM	#14429
twilyth Guest Posts: n/a (0/day)	I couldn't figure out why the temps would be a problem since I leave my car out all winter. Then I realized wc guys probably use something other than antifreeze in their loops.

Feb 4, 2012, 10:28 PM	#14432
Mydog Join Date: Mar 2010 Location: Oslo, Norway Posts: 340 (0.29/day) Thanks: 191 Thanked 400 Times in 157 Posts System Specs	Nice temps Sensor1: Water in to radaitor Sensor2: Water leaving radiator Sensor3: Airtemp bottom of case Sensor4: Airtemp topp of case just below radiator 1,41 vcore on CPU1 and 1,39 vcore on CPU2

Feb 5, 2012, 03:03 AM	#14434
mjkmike Join Date: Feb 2010 Location: Alberta,Canada Posts: 1,478 (1.24/day) Thanks: 2,686 Thanked 3,744 Times in 979 Posts System Specs	My new rig is on the box it came in. __________________ Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex

System Name:	Sexy Vanilla Freshness / The Sister / The I don't know what to do with it
Processor:	Core i5 3570K @4.5ghz 1.25V/ Phenom II 925 @ 3.6ghz 1.2V / Phenom II 955
Motherboard:	ASUS P8Z77-V / Asrock A770De+ / M4A785-M
Cooling:	Coolit ECO A.C.L / Corsair H40 / stock
Memory:	M379B5273DH0-YK0 2X4GB sticks/ 8 gigs 667 / 6 gigs 667
Video Card:	Sapphire HD 6870 / XFX 5770 XXX edition / OEM 4670
Hard Disk:	Toshiba MK5065GSX+ST375052+WD10EZEX / 1x WD1500 Black / Seagate 160 gig
Optical Drive:	None / LG supermulti drive
CRT/LCD Model:	Acer S200HL+Acer P206HV / LG 22LD350 / N/A
Case:	HAF X 912 / NZXT Trinity / N/A
Sound Card:	Onboard / Onboard
PSU:	Seasonic 750X / ROSEWILL RG630-S12 630W RT / Bestec 400
Software:	Windows 7 Home Premium 64 bit / Windows 7 Ultimate / MacOS
Benchmarks:	Once I saw a turtle with a taco on it's back, I hope hes still out there. Rock on Taco turtle, rock

Feb 5, 2012, 03:10 AM	#14436
mjkmike Join Date: Feb 2010 Location: Alberta,Canada Posts: 1,478 (1.24/day) Thanks: 2,686 Thanked 3,744 Times in 979 Posts System Specs	No camera at home. left it at brothers. If and or when it gets moved to a case I will post pics. __________________ Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex

Feb 5, 2012, 03:45 PM	#14437
KieX Join Date: Dec 2009 Location: A Coruña, Spain Posts: 2,050 (1.64/day) Thanks: 6,950 Thanked 2,642 Times in 1,135 Posts System Specs	Been having lots of weird problems with my rigs past few days. Total output halved, RAC dropping all the time.. Had some which weren't CPU loading 100%, others that weren't receiving new work and the dedicated CEP2 rigs kept restarting the WU's. Installed BoincView and keeping an eye on them more closely, re-ran benchmarks and even re-installed some clients. I think they should be all sorted out, but full output might take a few days to recover. Fingers crossed. __________________

Feb 5, 2012, 06:04 PM	#14439
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,733 (6.97/day) Thanks: 2,522 Thanked 2,440 Times in 1,468 Posts System Specs	I am now crunching for WGC. Ought to put up some decent numbers as I have devoted 3 rigs to it. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	Selene / Yoda / Xp Gaming rig
Processor:	Phenom II x6 1090t @ 3.6 / Phenom II x6 1055t @ 3.2 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	CM Hyper 212+ / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 2gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	Visiontek Hd7850 / Visiontek and Xfx HD6850's cfired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 750 watt / Corsair TX 650 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

System Name:	Sniper
Processor:	Intel Ivy Bridge i7 3770K
Motherboard:	Biostar TZ77A
Cooling:	total liquid cooling
Memory:	16GB Crucial Ballistix Tactical DDR3 1866
Video Card:	HIS HD7870 Turbo
Hard Disk:	2x Western Digital 300gb VRaptor HLFS Enterprise RAID 0
Optical Drive:	LG Super Multi Blue/Blue Ray burner
CRT/LCD Model:	HannsG HH231 23" & HP W2338H 23"
Case:	Cooler Master Sniper with side window
Sound Card:	On board
PSU:	Seasonic X series 750 watt total modular
Software:	Windows 7 Ultimate 64bit

Feb 5, 2012, 07:32 PM	#14441
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,733 (6.97/day) Thanks: 2,522 Thanked 2,440 Times in 1,468 Posts System Specs	Now how do I get the wcg cruncher sig thingy? The one I have should update itself to reflect Wcg once it does a dump. Which ought to be in about 40 mins or so. Wow Wcg goes through packets pretty fast. I'm used to seti which can take hours to days to complete packets. Got to get used to this right at 2 hour thing. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

Feb 5, 2012, 08:03 PM	#14445
mstenholm Join Date: Nov 2009 Location: Denmark Posts: 1,772 (1.38/day) Thanks: 1,009 Thanked 1,048 Times in 644 Posts System Specs	It was a europan . not an amerian. 100K.

Feb 5, 2012, 08:33 PM	#14450
mstenholm Join Date: Nov 2009 Location: Denmark Posts: 1,772 (1.38/day) Thanks: 1,009 Thanked 1,048 Times in 644 Posts System Specs	^^

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16534	May 16, 2013 03:35 AM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM