TPU's WCG/BOINC Team - Page 628

brandonwh64 · May 10, 2012, 12:49 PM

Quote:

Originally Posted by Bow

New mobo is in and everything is updating. Should be crunching again by the weekend

Hell yea bow! Once I get that water cooler from you I will have my second 2600K up to 4.5Ghz (Thanks KieX) and we will see some good numbers! I will try to run with the stock cooler for now but I doubt it will hold 4.5ghz on it.

Bow · May 10, 2012, 01:27 PM

I will get a box after work and have it in the mail friday.
i will through in an extra fan so you can set it up to push/pull.

Norton · May 10, 2012, 02:17 PM

Quote:

Originally Posted by stinger608

That is very, very odd indeed! It is like his whole TPU account has been deactivated.

What the hell is going on I wonder? Starting to get me a bit worried to be honest.

His rigs are running for the team SeriousCrunchers ATM....

maybe he's taking a bit of a break from here. The last posts of his that I saw were on General Nonsense over the weekend and they were a little....intense.

I can't speak for anyone else but I'll welcome him back if/when he decides to return

Daimus · May 10, 2012, 04:14 PM

Well, i'm back. Main rig has lost the connection 3 days ago, i uploaded the results, so my PPD will be higher today than usual.

theonedub · May 10, 2012, 04:15 PM

When I replace my P55 setup with a P67 board, what drivers do I uninstall before the switch (so I don't have to reinstall Windows- just did that with my SSD)?

I'm assuming its everything that says P55 and 5 series in device manager:

Im half tempted not to touch anything and just let Windows figure it out. The last time I did that it worked fine

JrRacinFan · May 10, 2012, 04:19 PM

Quote:

Originally Posted by theonedub

The last time I did that it worked fine

Did the same as well. Worked fine. My win-stall was rather cluttered and reinstalled a few days later anyways.

brandonwh64 · May 10, 2012, 04:38 PM

Quote:

Originally Posted by Norton

His rigs are running for the team SeriousCrunchers ATM....

maybe he's taking a bit of a break from here. The last posts of his that I saw were on General Nonsense over the weekend and they were a little....intense.

I can't speak for anyone else but I'll welcome him back if/when he decides to return

I believe he maybe just helping them get started cause their team is quite small. They also have a website as well

http://seriouscrunchers.net/

Jstn7477 · May 10, 2012, 06:01 PM

My BOINC install decided to break on my AM2NF3-VSTA machine running XP x86. Basically, it just permanently says "reconnecting to client" and doesn't even acknowledge it is attached to a project. Tried reinstalling it but no dice. I'm now on XP x64 without AGP texture acceleration but I'll just use another one of my machines for web browsing and stuff I suppose. Hopefully this machine will output more (gets 42 GFLOPS vs 29 in x86).

ThE_MaD_ShOt · May 10, 2012, 11:38 PM

I had that happen to 2 machines so far. And like you said uninstalling and reinstalling doesn't fix it. One was my xp x86 machine and the other was one of my linux boxes. I played for an hour or so on the xp machine to get it going to no avail. I even tried a system restore. Nothing. finally said the hell with it and killed the hdd and installed Ubuntu.

ChristTheGreat · May 10, 2012, 11:52 PM

Finaly, added a Xeon E3-1200 3.10GHz 8MB, the server came with only one CPU.. but I think this model, when I choosed the free second CPU, can't support as it's a small dell server

Installed BOIN v5 as it's a Domain controller, 6 and later doesn't work :/

well, 4 thread at 60% more, thought it was HT also

Norton · May 11, 2012, 12:18 AM

I found a "secondary" location for one of my crunchers. I have a friend who owns a small business who is letting me hook up one of my rigs in his office.

Free power, AC, net connection, and a secure location

He also runs a fairly good size server so I laid the ground work towards getting him to join WCG and our team

ThE_MaD_ShOt · May 11, 2012, 04:08 AM

Oh here is a screen shot from my newest addition.

Jstn7477 · May 11, 2012, 04:12 AM

Just pulled the trigger on a refurbished ASUS M5A99X EVO for $89 + shipping from Geeks, as well as some more DDR3 and a refurbished CM Hyper 212+ for $13. After my Crosshair III Formula blew up last week I figured it would be a nice replacement. Going to pull the 955BE out of the AM2NF3 and put it in there.

Anyone know how well these 990X boards clock on the HTT? Would love to put my 1045T in there and reach ~4GHz/300HT if it blows up my Biostar A780L3B any time soon. I've been stuck with 7xx chipsets too long and they all only do 260-270 HTT and that's it.

Anggoro · May 11, 2012, 04:47 AM

hi i'm a newbie.
i'm interested and wanna ask a question: do i have to be connected to the internet all the time?
i have a machine that doesnt really have much use, (it's only PDC e5700 tho)

Daimus · May 11, 2012, 05:47 AM

Quote:

Originally Posted by Anggoro

hi i'm a newbie.
i'm interested and wanna ask a question: do i have to be connected to the internet all the time?
i have a machine that doesnt really have much use, (it's only PDC e5700 tho)

Hi Anggoro!
Answering your question, i can definitely say that a constant connection is not required.
As for the CPU power, i was confused at first too. But the team told me the remarkable words: "every little bit counts"

Anggoro · May 11, 2012, 05:52 AM

Quote:

Originally Posted by Daimus

Hi Anggoro!
Answering your question, i can definitely say that a constant connection is not required.
As for the CPU power, i was confused at first too. But the team told me the remarkable words: "every little bit counts"

hi Daimus. thanks for the answer.
i've been interested on this thing for a while, but it's only recently i've got a rig to spare.

i dont think i'll be able to run it 24/7.
a day(12 hours) to 20 is reasonable tho.
that ok?

Daimus · May 11, 2012, 06:01 AM

Quote:

Originally Posted by Anggoro

i dont think i'll be able to run it 24/7.
a day(12 hours) to 20 is reasonable tho.
that ok?

In fact, few people have the ability to run the cruncher for more than 12/24, so that's ok. We will be glad if you joined the team. New members are always welcome!

Norton · May 11, 2012, 09:47 AM

Quote:

Originally Posted by Anggoro

hi Daimus. thanks for the answer.
i've been interested on this thing for a while, but it's only recently i've got a rig to spare.

i dont think i'll be able to run it 24/7.
a day(12 hours) to 20 is reasonable tho.
that ok?

Quote:

Originally Posted by Daimus

In fact, few people have the ability to run the cruncher for more than 12/24, so that's ok. We will be glad if you joined the team. New members are always welcome!

Every little bit counts as Daimus stated. Some members run their systems part-time and contribute what they can. New members are always welcome and feel free to post here or PM a fellow team member if you have any questions.

Chicken Patty · May 11, 2012, 12:21 PM

Quote:

Originally Posted by Anggoro

hi Daimus. thanks for the answer.
i've been interested on this thing for a while, but it's only recently i've got a rig to spare.

i dont think i'll be able to run it 24/7.
a day(12 hours) to 20 is reasonable tho.
that ok?

Every bit counts, trust me on that.

Also, you can just set it to download four days of work. So you can connect it to the internet every 3 or so days, let it upload all the work, download more work and that's it. Only thing is your stats are going to be all over the place, but those are just #'s.

okidna · May 11, 2012, 03:09 PM

Quote:

Originally Posted by Anggoro

hi Daimus. thanks for the answer.
i've been interested on this thing for a while, but it's only recently i've got a rig to spare.

i dont think i'll be able to run it 24/7.
a day(12 hours) to 20 is reasonable tho.
that ok?

Hey ya, my fellow countrymen

Welcome to the best crunching team!

Every bit counts like everybody said. And I also like to point out that you'll meet a lot of nice, helpful, and generous guys here. They're all the best!

ThE_MaD_ShOt · May 11, 2012, 10:58 PM

When I started out I was only crunching about 15 hrs a day on one machine with about 500 ppd. I slowly at first moved up to crunching 24hrs a day. Then something snapped in my head and now I have 5 main crunchers that run 24/7. And 2 that are part time crunchers.

brandonwh64 · May 11, 2012, 11:00 PM

Quote:

Originally Posted by ThE_MaD_ShOt

When I started out I was only crunching about 15 hrs a day on one machine with about 500 ppd. I slowly at first moved up to crunching 24hrs a day. Then something snapped in my head and now I have 5 main crunchers that run 24/7. And 2 that are part time crunchers.

Yea I started with my HTPC crunching then it grew from there. Now I have 4 Full crunchers going 24/7

Norton · May 11, 2012, 11:06 PM

Quote:

Originally Posted by brandonwh64

Yea I started with my HTPC crunching then it grew from there. Now I have 4 Full crunchers going 24/7

and getting teased by bouncing in and out of the Top 10 pie

I started with 1 rig running and now I have 3 and am planning for #4 as well as doing what I can, in one small way or another, to help fellow crunchers keep their rigs going

popswala · May 11, 2012, 11:41 PM

Well I have one rig shutting down tonight and the other tomorrow. Gonna be preparing for the new build migration. I'm hopin everything goes smoothly. I'll still have either one crunchin at a time and still be able to pop on here. Keepin the team updated as it may seem my numbers go down a lil or I'm not around. I'll keep ya posted. I'll get pics of my progress and everything going together to share.

Norton · May 11, 2012, 11:49 PM

Quote:

Originally Posted by popswala

Well I have one rig shutting down tonight and the other tomorrow. Gonna be preparing for the new build migration. I'm hopin everything goes smoothly. I'll still have either one crunchin at a time and still be able to pop on here. Keepin the team updated as it may seem my numbers go down a lil or I'm not around. I'll keep ya posted. I'll get pics of my progress and everything going together to share.

Good luck with your building

FYI- I owe you a PM on the Iceberg case, will get back to you soon

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

System Name:	SLO-MO-SHUN
Processor:	AMD Phenom II X6 1100T 3.97ghz
Motherboard:	MSI 990FXA-GD80 AM3+ AMD 990FX
Cooling:	CORSAIR CWCH50-1 High Performance Water Cooler
Memory:	G.Skill Ripjaws 8 GB (2 x 4 GB) DDR3 1600
Video Card:	SAPPHIRE HD 7970 3GB GDDR5 Twin Fan
Hard Disk:	SEAGATE Barracuda 7200 RPM 1TB, OCZ Vertex2 60GB SSD
Optical Drive:	ASUS DRW 24B1ST SATA 24X DVD Burner
CRT/LCD Model:	ASUS VH238H 24" 1080P 2MS HDMI LCD
Case:	AZZA Hurrican 2000
Sound Card:	MSI Onboard/Realtek
PSU:	XFX Black Edition XPS-850W 80 Plus Silver
Software:	MICROSOFT Windows 7, 64 Bit

System Name:	My Fortress/Trish (WCG #1)/Julia (WCG #2)/Junior (WCG #3)/Norton3 (WCG #4)/My Niece (WCG #5)/TBA
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/Xeon (6c/12t)/i7 920
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill Ares DDR31866/2x4GB DDR3 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/7770/HD 7870/3x HD 7770's
Hard Disk:	2xWD 640(Blue)/WD 80/WD 160/WD 320 (2.5")/WD 160(2.5")/WD VR 150GB/WD 320
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone Fortress FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/TBA
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/TX550M
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

System Name:	Cruncher 1/2/3
Processor:	FX-8120@4,4GHz / PII 1075T@3,7GHz / PII 1045T@3,3GHz
Motherboard:	Asus Crosshair IV Formula (890FX) / Asus M5A97 Pro / Asus M5A97 Pro
Cooling:	Thermalright Silver Arrow SB-E / CoolerMaster V6 GT / CoolerMaster TX3
Memory:	2x4 GB Corsair XMS3 2000 / 2x2 GB Kingston HyperX 1600 / 2x2 GB Kingston HyperX 1600
Video Card:	Sapphire HD7870+Powercolor HD7850 CrossFire / MSI HD6670 / MSI HD6570
Hard Disk:	Corsair ForceGT 90 SSD,WD Black 500 / WD Black 500 / Hitachi 320
Optical Drive:	DVD-RW Pioneer
CRT/LCD Model:	Acer 24'' 2ms / Samsung 22'' 2ms / Philips 42''HDTV
Case:	Cooler Master HAF 932 / Inwin / Inwin
Sound Card:	onboard
PSU:	Thermaltake Grand 1050w 80+Gold / OCZ 650w 80+Bronze / Powerman 450w
Software:	Win 7 SP1 Ult x64

May 10, 2012, 04:15 PM	#15680
theonedub habe fidem Join Date: Apr 2009 Location: Northern CA Posts: 6,612 (4.46/day) Thanks: 2,273 Thanked 3,191 Times in 1,925 Posts System Specs	When I replace my P55 setup with a P67 board, what drivers do I uninstall before the switch (so I don't have to reinstall Windows- just did that with my SSD)? I'm assuming its everything that says P55 and 5 series in device manager: Im half tempted not to touch anything and just let Windows figure it out. The last time I did that it worked fine __________________ My Heatware Feedback 129+ Pristine

May 10, 2012, 01:27 PM	#15677
Bow Join Date: Jul 2008 Location: South Colton, New York Posts: 1,653 (0.94/day) Thanks: 755 Thanked 664 Times in 401 Posts System Specs	I will get a box after work and have it in the mail friday. i will through in an extra fan so you can set it up to push/pull.

May 10, 2012, 04:14 PM	#15679
Daimus Join Date: Sep 2011 Location: somewhere in Eastern Europe Posts: 482 (0.79/day) Thanks: 3,600 Thanked 464 Times in 262 Posts System Specs	Well, i'm back. Main rig has lost the connection 3 days ago, i uploaded the results, so my PPD will be higher today than usual.

System Name:	WCG0
Processor:	i7 3770k @ 4.2ghz 1.080v
Motherboard:	Asrock Z77E-ITX
Cooling:	Corsair H100 w/ SP120s
Memory:	16GB Corsair Vengeance DDR3 1600
Video Card:	MSI GTX 580 TFIII LIGHTNING (875c@1.006v)
Hard Disk:	256gb Corsair Performance Pro, 2TB Caviar Green, 2TB Samsung F4
CRT/LCD Model:	DELL Ultrasharp U2713HM 27"
Case:	BitFenix Prodigy White
PSU:	Antec TruePower New Blue 750w
Software:	Windows 7 Pro x64
Benchmarks:	WCG & F@H

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

May 10, 2012, 06:01 PM	#15683
Jstn7477 Join Date: Aug 2009 Location: Sarasota, Florida, USA Posts: 3,136 (2.30/day) Thanks: 387 Thanked 1,193 Times in 805 Posts System Specs	My BOINC install decided to break on my AM2NF3-VSTA machine running XP x86. Basically, it just permanently says "reconnecting to client" and doesn't even acknowledge it is attached to a project. Tried reinstalling it but no dice. I'm now on XP x64 without AGP texture acceleration but I'll just use another one of my machines for web browsing and stuff I suppose. Hopefully this machine will output more (gets 42 GFLOPS vs 29 in x86). __________________ Intel Crunchers (27 threads): 2x 3770K 4.3G (14t), 2600K 4G (7t), X3210 (3t), P-M 735A, P4 HT 3G AMD Crunchers (11 cores):1100T 3.6G (3t), 1045T 3.4G (2t), X3 8550 2.5G, X2 4200+, T64 ML-37 AMD Folders (6272 GCN cores): 2x 7950 1125/1475, 7970 1150/1650, 7770 1100/1200 NV Folders (2336 GF10x + 1344 GK104 cores):GTX 470 & 465 720/1715, 4x 460 768MB 825/2000, GTS 450, 660Ti 1228/6000 HEATWARE

System Name:	Awesomesauce \| Laptop (Toshiba A665D-S6091) \| "The Shoebox"
Processor:	Intel Core i7-3770K @ 4.3GHz/1.18v \| AMD PII Mobile X4 X920 @ 2.3GHz\|AMD E-350 APU
Motherboard:	ASRock Z77 Extreme6 \| NWQAE S1G4 (880G/SB850) \| Gigabyte E350N-USB3
Cooling:	Thermaltake Water 2.0 Performer, 2x Cougar CF-V12HB + 5 Rosewill RFA-120-RL
Memory:	G.Skill RJ-X 16GB DDR3-2000 CL11 \| Stock 2*2GB DDR3-1066 CL7 \| 4GB DDR3-1333
Video Card:	XFX DD HD7950 3GB 1175/1500 1.2v w/ Accelero Xtreme 7970 \| ATI MR 5650 1GB DDR3 @ 550/900 \| 6310 IGP
Hard Disk:	Mushkin Chronos 240GB + Seagate Green 2TB \| WD Scorpio Black 750GB \| Samsung F1 1TB
Optical Drive:	ASUS 24x SATA \| Sony Optiarc AD-7703S 8x Labelflash \| Samsung Writemaster 22x SATA
CRT/LCD Model:	ASUS VG236HE 23" 120Hz 1080p \| 16.0" 1366*768 LED laptop glossy LCD \| Samsung 940BW
Case:	NZXT Source 210 \| Toshiba A665D \| Rosewill MI-01-BK ITX "shoebox"
Sound Card:	Realtek ALC898 \| Realtek ALC269 with harman/kardon speakers \| Realtek ALC892
PSU:	Rosewill CAPSTONE 550w (80Plus Gold) \| 75W 19.5v brick \| Seasonic 350w ITX
Software:	Windows 7 Pro x64 + Ubuntu 12.10 \| Windows 8 Pro x64 (laptop)
Benchmarks:	120FPS in the games I play? :P

May 10, 2012, 11:38 PM	#15684
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,753 (6.94/day) Thanks: 2,546 Thanked 2,450 Times in 1,474 Posts System Specs	I had that happen to 2 machines so far. And like you said uninstalling and reinstalling doesn't fix it. One was my xp x86 machine and the other was one of my linux boxes. I played for an hour or so on the xp machine to get it going to no avail. I even tried a system restore. Nothing. finally said the hell with it and killed the hdd and installed Ubuntu. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	Selene / Yoda / Xp Gaming rig
Processor:	Phenom II x6 1090t @ 3.6 / Phenom II x6 1055t @ 3.2 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	CM Hyper 212+ / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 4gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek Hd7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 750 watt / Corsair TX 650 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

May 10, 2012, 11:52 PM	#15685
ChristTheGreat Join Date: Jun 2007 Location: Montreal Posts: 700 (0.32/day) Thanks: 412 Thanked 231 Times in 131 Posts System Specs	Finaly, added a Xeon E3-1200 3.10GHz 8MB, the server came with only one CPU.. but I think this model, when I choosed the free second CPU, can't support as it's a small dell server Installed BOIN v5 as it's a Domain controller, 6 and later doesn't work :/ well, 4 thread at 60% more, thought it was HT also

System Name:	CTG Computer
Processor:	Intel i5 2500k @ 4.7ghz 1.32/1.34v
Motherboard:	Asus P8P67 Evo
Cooling:	Zalman CNPS10x Extreme modded
Memory:	2x 4gb Kingston HyperX Genesis PnP 1.5v 1600mhz
Video Card:	MSI HD7950 TFIII Boost edition (960/1250)
Hard Disk:	Crucial M4 64gb(OS) \| Crucial M4 256GB(Games) \| RAID 1 Western Digital Black 1TB 32mb
Optical Drive:	LG DVD-Burner
CRT/LCD Model:	2x Asus VE228H
Case:	CoolerMaster CM690 Advanced II + USB3 TOP
PSU:	OCZ Z-Series 850w GOLD
Software:	Windows 7 Ultimate x64

May 11, 2012, 12:18 AM	#15686
Norton WCG Team Assistant Join Date: Dec 2011 Location: Northeast, USA Posts: 5,172 (9.95/day) Thanks: 5,411 Thanked 10,139 Times in 3,190 Posts System Specs	I found a "secondary" location for one of my crunchers. I have a friend who owns a small business who is letting me hook up one of my rigs in his office. Free power, AC, net connection, and a secure location He also runs a fairly good size server so I laid the ground work towards getting him to join WCG and our team __________________ *Why sit on the Bench* when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's WCG-TPU Team thread- crunch for our Team/see what we do...**

May 11, 2012, 04:08 AM	#15687
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,753 (6.94/day) Thanks: 2,546 Thanked 2,450 Times in 1,474 Posts System Specs	Oh here is a screen shot from my newest addition. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

May 11, 2012, 04:12 AM	#15688
Jstn7477 Join Date: Aug 2009 Location: Sarasota, Florida, USA Posts: 3,136 (2.30/day) Thanks: 387 Thanked 1,193 Times in 805 Posts System Specs	Just pulled the trigger on a refurbished ASUS M5A99X EVO for $89 + shipping from Geeks, as well as some more DDR3 and a refurbished CM Hyper 212+ for $13. After my Crosshair III Formula blew up last week I figured it would be a nice replacement. Going to pull the 955BE out of the AM2NF3 and put it in there. Anyone know how well these 990X boards clock on the HTT? Would love to put my 1045T in there and reach ~4GHz/300HT if it blows up my Biostar A780L3B any time soon. I've been stuck with 7xx chipsets too long and they all only do 260-270 HTT and that's it. __________________ Intel Crunchers (27 threads): 2x 3770K 4.3G (14t), 2600K 4G (7t), X3210 (3t), P-M 735A, P4 HT 3G AMD Crunchers (11 cores):1100T 3.6G (3t), 1045T 3.4G (2t), X3 8550 2.5G, X2 4200+, T64 ML-37 AMD Folders (6272 GCN cores): 2x 7950 1125/1475, 7970 1150/1650, 7770 1100/1200 NV Folders (2336 GF10x + 1344 GK104 cores):GTX 470 & 465 720/1715, 4x 460 768MB 825/2000, GTS 450, 660Ti 1228/6000 HEATWARE

May 11, 2012, 04:47 AM	#15689
Anggoro Join Date: May 2012 Location: Indonesia Posts: 18 (0.05/day) Thanks: 2 Thanked 2 Times in 2 Posts System Specs	hi i'm a newbie. i'm interested and wanna ask a question: do i have to be connected to the internet all the time? i have a machine that doesnt really have much use, (it's only PDC e5700 tho)

System Name:	Ephraim
Processor:	A8-3870k
Motherboard:	Asus F1a55-mlx
Cooling:	Deepcool Gammax300
Memory:	4gb kit Apogee 1333 ddr3

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

System Name:	Downgrading......
Processor:	AMD FX-4100 @ 4.6 Ghz
Motherboard:	ASRock 970 Extreme3
Cooling:	Xigmatek DK Nighthawk
Memory:	F3-12800CL9D-4GBRL
Video Card:	HIS HD7850 @ 1000/1400
Hard Disk:	80GB WDC + 500 GB WDC GREEN
PSU:	Seasonic SS-650AT 650W
Software:	Windows 7 SP1 x64
Benchmarks:	http://www.techpowerup.com/gpuz/aqppg/ \| http://valid.canardpc.com/2702426

May 11, 2012, 10:58 PM	#15696
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,753 (6.94/day) Thanks: 2,546 Thanked 2,450 Times in 1,474 Posts System Specs	When I started out I was only crunching about 15 hrs a day on one machine with about 500 ppd. I slowly at first moved up to crunching 24hrs a day. Then something snapped in my head and now I have 5 main crunchers that run 24/7. And 2 that are part time crunchers. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

May 11, 2012, 11:41 PM	#15699
popswala Join Date: May 2009 Location: Conway, AR Posts: 2,188 (1.50/day) Thanks: 1,602 Thanked 960 Times in 717 Posts System Specs	Well I have one rig shutting down tonight and the other tomorrow. Gonna be preparing for the new build migration. I'm hopin everything goes smoothly. I'll still have either one crunchin at a time and still be able to pop on here. Keepin the team updated as it may seem my numbers go down a lil or I'm not around. I'll keep ya posted. I'll get pics of my progress and everything going together to share. __________________ HEAT eBAY My Sale Thread FOLDING GTX 460 SC x2 / 6950 / GTX 275 CRUNCHING I7 870 4.08GHz/ I3 530 3.7GHz / Ph II X4 945 3.2GHzz / Ph II X4 940 3.4GHz / Ph II X3 720 3.4GHz / i7 720QM 1.60GHz = [21c/31t]

System Name:	Deep Space // Black Mystery
Processor:	AMD Phen II X4 945 oc'd 3.4GHz // I7 870 oc'd 4.0GHz
Motherboard:	Gigabyte 990FXA-UD7 AM3+ // MSI P55-GD80
Cooling:	Corsair H50 w/ x2 gelid wing blue 120mm // Tt Frio OCK
Memory:	G. Skill Snipers DDR3 1600 2x4GB // G.Skill Tridents DDR3 2000 2x2GB
Video Card:	eVGA GTX 275 // eVGA GTX 460 SC 768mb oc'd (830/1620/2000
Hard Disk:	Seagate 1TBx2 7200.12 /1.5TB/500GB/750GB // Mushkin Collistro 60GB
Optical Drive:	LG combo burner // LG Combo Burner
CRT/LCD Model:	LG 23" 2353v-pf 1920x1080p // None
Case:	Tt Chazer MK-1 // NZXT Phantom black modded
Sound Card:	Logitech G51 5.1 // None
PSU:	Cooler Master Silent Pro Hybrid 850w // Corsair HX1000W
Software:	Win 7 Ult X64 // Win 7 Ult X64
Benchmarks:	Crunching & Folding 24/7 Help Save Lives!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16542	May 22, 2013 02:25 PM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM