TPU's WCG/BOINC Team - Page 631

Daimus · May 15, 2012, 05:23 PM

Quote:

Originally Posted by Norton

You are correct- they are capable of high clocks but they use a LOT of power to do it

Now that you have a couple of systems running you can try backing down a bit on your OC on the 8120.... it is possible to get 5-10% less on your results for a improvement of 20-30% on the power. 4Ghz or less may be a good spot to try.

Thanks for the advice, I'd make it. Power consumption has become too large. Over the past month, my bill has increased by 3 times. For me it's not a problem, but the signal.

brandonwh64 · May 15, 2012, 05:47 PM

Ok all my crunchers + a 560TI have been moved over to F@H! the 2600K @ 4.5ghz shows its getting over 40K PPD!!! the 560TI only getting around 28K PPD

popswala · May 15, 2012, 08:36 PM

I find it funny and dissapointing that my 460 gets a lil more ppd then the 250's I use to have.

Norton · May 15, 2012, 08:41 PM

Quote:

Originally Posted by Daimus

Thanks for the advice, I'd make it. Power consumption has become too large. Over the past month, my bill has increased by 3 times. For me it's not a problem, but the signal.

Mine has gone up a bit too. May run higher clocks in the Winter and use the extra power and heat to save on the heating bill

popswala · May 16, 2012, 01:28 AM

ok. I tried looking up on how to oc this board. Not much luck. Theres a easytune6 program for here but for some reason it won't install. I'll try again after next reboot and see if I can get it on here. May mess with it some. I read that it does work but not as much as doing it manually through bios.

If anyone have any exp with gigabyte and award bios. PM to guide me or point me in some direction online where I can find how to push this thing some.

Thanks

ThE_MaD_ShOt · May 16, 2012, 01:40 AM

I wouldn't install easytune 6 unless you like cpu throttling. I had it installed on my x6 and every couple days the cpu would be running at 2.3 ghz. I went into the bios and static set all the peramiters and it didn't change a thing. After uninstalling Esytune everything went back to normal. I also disabled cool and quiet in the bios but easytune over rided the settings.

popswala · May 16, 2012, 01:45 AM

If I remember right I don't think cool n quiet is on. I sure don't want throttling. Only I did was up my ram from 1333 to 1600 since my ram is stated 1600. I tried to mess with M.I.T. iirc but that didn't do anything but lockup. I know I need to make changes to other like NB but I'm not sure what all I want to mess with now in what order. I'm running a 945be so not sure how far it'll go stable.

Jstn7477 · May 16, 2012, 01:47 AM

I never like to use those POS motherboard OC utilities. :P

If you have a pain in the ass Phenom/Phenom II based motherboard that won't let you undervolt (such as my Foxconn A7DA-S), you should try out PhenomMsrTweaker. It's the only way I can run a mobile 45w Phenom II X4 X920 quad core @ 2.2GHz in my 35w laptop (replaced a PII X4 P920 1.7GHz).

It's not an OCing program in any way. Rather, it lets you set multis, volts and P-states and can apply them at startup as well.

Norton · May 16, 2012, 01:56 AM

Quote:

Originally Posted by popswala

If I remember right I don't think cool n quiet is on. I sure don't want throttling. Only I did was up my ram from 1333 to 1600 since my ram is stated 1600. I tried to mess with M.I.T. iirc but that didn't do anything but lockup. I know I need to make changes to other like NB but I'm not sure what all I want to mess with now in what order. I'm running a 945be so not sure how far it'll go stable.

Need to hunt around a bit in a gigabyte BIOS to find all of the settings but they should all be there but... I don't think the 945 is a BE? Check in CPUZ or the CPU part#

Also, PII's memory controllers run better at lower latency than higher Mhz (try 1333 @ cas8 rather 1600 @ cas9)

ThE_MaD_ShOt · May 16, 2012, 01:59 AM

Quote:

Originally Posted by Norton

Need to hunt around a bit in a gigabyte BIOS to find all of the settings but they should all be there but... I don't think the 945 is a BE? Check in CPUZ or the CPU part#

Also, PII's memory controllers run better at lower latency than higher Mhz (try 1333 @ cas8 rather 1600 @ cas9)

Norton is right about the memory. You can go alot farther if you step the memory down to 1333. At 1600 there is not much if any difference on a PhII as speed goes.

Congrats Norton you are a four star cruncher too.

popswala · May 16, 2012, 02:04 AM

Thanks. I'll step them back down at next restart.

Here's a screenie to show all that I got. Any thought or opinions on what I can do to it. Lookin to get more out of it for crunchin.

Norton · May 16, 2012, 02:11 AM

Quote:

Originally Posted by ThE_MaD_ShOt

Congrats Norton you are a four star cruncher too.

How did that get there??? Won't last long

ThE_MaD_ShOt · May 16, 2012, 02:39 AM

Quote:

Originally Posted by popswala

Thanks. I'll step them back down at next restart.

Here's a screenie to show all that I got. Any thought or opinions on what I can do to it. Lookin to get more out of it for crunchin.

http://img.techpowerup.org/120515/Sys specs.jpg

Did you just put that system together or reinstalled wcg on it?

popswala · May 16, 2012, 02:40 AM

This is the one that just went together this wkend. So yea wcg is new on here also.

ThE_MaD_ShOt · May 16, 2012, 02:47 AM

Oh hell man you need to give it about a week to throttle up. All new builds for some reason need to throttle up on the crunching part. I noticed you usually hit full speed after you turn in anywhere from 100 to 150 results. Atleast thats how it's been on all my recent builds. If you notice the graph on my numbers except for today (x6 was down for 6 hrs) since the 11th my numbers have been climbing everyday and thats due to the 555 throttling up since it's build. I should be at full speed by tomorrow. It takes just about a week for the system to hit full crunching speed.

popswala · May 16, 2012, 02:52 AM

Any configures I should use like on the cpu use, or anything I should adjust. I want to get the most out of it but I also use it. My other rig is maxed out and its moving along quite nicely, faster then my wife's lappy.

whats with the stars? i don't remember. You guys got 4 and I've been sitting at 2 for a really, really long time.

ThE_MaD_ShOt · May 16, 2012, 02:56 AM

I have my system set at 95% cpu which seems to help with heat some.

Norton · May 16, 2012, 03:11 AM

Quote:

Originally Posted by popswala

Any configures I should use like on the cpu use, or anything I should adjust. I want to get the most out of it but I also use it. My other rig is maxed out and its moving along quite nicely, faster then my wife's lappy.

whats with the stars? i don't remember. You guys got 4 and I've been sitting at 2 for a really, really long time.

The stars are based on 7 day avg ppd. I think 4 stars is for over 7,500 ppd but I don't remember the level #'s for each star (there used to be a link in twilyth's sig that I used to use

)

You seem to be running a little hot- probably normal if crunching/folding but I would back off on the multiplier or check your cooling.

popswala · May 16, 2012, 03:14 AM

The cpu's under an h50. I thought that was a lil high also as air was getting me around 43c. Funny how going water adds 10c. My old cooler did have some as5 under it but I ran out on last rig so I had to dig throw old coolers and find some tim which was kinda old but got me going. I should have waited on rig but I was too darn anxious to build again lol.

Norton · May 16, 2012, 03:21 AM

Quote:

Originally Posted by popswala

The cpu's under an h50. I thought that was a lil high also as air was getting me around 43c. Funny how going water adds 10c. My old cooler did have some as5 under it but I ran out on last rig so I had to dig throw old coolers and find some tim which was kinda old but got me going. I should have waited on rig but I was too darn anxious to build again lol.

You're not going to last long w/o proper TIM on that chip... go get some AS5 and/or back it down to at least 2.8Ghz (WCG <80% or off)

X4 945's are C2 revisions and they run hot anyway- don't help it run hotter!

brandonwh64 · May 17, 2012, 12:07 AM

I was gonna post these pictures yesterday but got busy and forgot. Its alittle rigged up ATM but once I find a good case for it, then I will be set!

Norton · May 17, 2012, 12:17 AM

Quote:

Originally Posted by brandonwh64

I was gonna post these pictures yesterday but got busy and forgot. Its alittle rigged up ATM but once I find a good case for it, then I will be set!

http://img.techpowerup.org/120516/setup1.jpg
http://img.techpowerup.org/120516/setup2.jpg

follow jbunch07's method of merging a system with the furniture. A couple of builds in cube type boxes from IKEA will mix right in with the decor

brandonwh64 · May 17, 2012, 12:19 AM

Quote:

Originally Posted by Norton

follow jbunch07's method of merging a system with the furniture. A couple of builds in cube type boxes from IKEA will mix right in with the decor

I have no other place to put them, we have two bed rooms and a sun room (which has not AC) so the living room next to my HTPC is about the best I can do for now. Also the router is here so I can hard wire each one in. I have two wireless card if I decide to use in another room. I am seeing what I get sell here soon so I can pickup that NZXT Source case for the 2600K

ThE_MaD_ShOt · May 17, 2012, 12:43 AM

Quote:

Originally Posted by brandonwh64

I have no other place to put them, we have two bed rooms and a sun room (which has not AC) so the living room next to my HTPC is about the best I can do for now. Also the router is here so I can hard wire each one in. I have two wireless card if I decide to use in another room. I am seeing what I get sell here soon so I can pickup that NZXT Source case for the 2600K

I know what you can sell. the 1055t LOL

brandonwh64 · May 17, 2012, 12:48 AM

Quote:

Originally Posted by ThE_MaD_ShOt

I know what you can sell. the 1055t LOL

LOL HAHAHA It still has some crunching to do here before I let it go.

System Name:	Cruncher 1/2/3
Processor:	FX-8120@4,4GHz / PII 1075T@3,7GHz / PII 1045T@3,3GHz
Motherboard:	Asus Crosshair IV Formula (890FX) / Asus M5A97 Pro / Asus M5A97 Pro
Cooling:	Thermalright Silver Arrow SB-E / CoolerMaster V6 GT / CoolerMaster TX3
Memory:	2x4 GB Corsair XMS3 2000 / 2x2 GB Kingston HyperX 1600 / 2x2 GB Kingston HyperX 1600
Video Card:	Sapphire HD7870+Powercolor HD7850 CrossFire / MSI HD6670 / MSI HD6570
Hard Disk:	Corsair ForceGT 90 SSD,WD Black 500 / WD Black 500 / Hitachi 320
Optical Drive:	DVD-RW Pioneer
CRT/LCD Model:	Acer 24'' 2ms / Samsung 22'' 2ms / Philips 42''HDTV
Case:	Cooler Master HAF 932 / Inwin / Inwin
Sound Card:	onboard
PSU:	Thermaltake Grand 1050w 80+Gold / OCZ 650w 80+Bronze / Powerman 450w
Software:	Win 7 SP1 Ult x64

May 15, 2012, 05:47 PM	#15752
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,569 (10.01/day) Thanks: 2,148 Thanked 5,342 Times in 3,697 Posts System Specs	Ok all my crunchers + a 560TI have been moved over to F@H! the 2600K @ 4.5ghz shows its getting over 40K PPD!!! the 560TI only getting around 28K PPD __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

May 15, 2012, 08:36 PM	#15753
popswala Join Date: May 2009 Location: Conway, AR Posts: 2,188 (1.50/day) Thanks: 1,602 Thanked 960 Times in 717 Posts System Specs	I find it funny and dissapointing that my 460 gets a lil more ppd then the 250's I use to have. __________________ HEAT eBAY My Sale Thread FOLDING GTX 460 SC x2 / 6950 / GTX 275 CRUNCHING I7 870 4.08GHz/ I3 530 3.7GHz / Ph II X4 945 3.2GHzz / Ph II X4 940 3.4GHz / Ph II X3 720 3.4GHz / i7 720QM 1.60GHz = [21c/31t]

System Name:	Deep Space // Black Mystery
Processor:	AMD Phen II X4 945 oc'd 3.4GHz // I7 870 oc'd 4.0GHz
Motherboard:	Gigabyte 990FXA-UD7 AM3+ // MSI P55-GD80
Cooling:	Corsair H50 w/ x2 gelid wing blue 120mm // Tt Frio OCK
Memory:	G. Skill Snipers DDR3 1600 2x4GB // G.Skill Tridents DDR3 2000 2x2GB
Video Card:	eVGA GTX 275 // eVGA GTX 460 SC 768mb oc'd (830/1620/2000
Hard Disk:	Seagate 1TBx2 7200.12 /1.5TB/500GB/750GB // Mushkin Collistro 60GB
Optical Drive:	LG combo burner // LG Combo Burner
CRT/LCD Model:	LG 23" 2353v-pf 1920x1080p // None
Case:	Tt Chazer MK-1 // NZXT Phantom black modded
Sound Card:	Logitech G51 5.1 // None
PSU:	Cooler Master Silent Pro Hybrid 850w // Corsair HX1000W
Software:	Win 7 Ult X64 // Win 7 Ult X64
Benchmarks:	Crunching & Folding 24/7 Help Save Lives!!!

System Name:	My Fortress/Trish (WCG #1)/Julia (WCG #2)/Junior (WCG #3)/Norton3 (WCG #4)/My Niece (WCG #5)/TBA
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/Xeon (6c/12t)/i7 920
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill Ares DDR31866/2x4GB DDR3 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/7770/HD 7870/3x HD 7770's
Hard Disk:	2xWD 640(Blue)/WD 80/WD 160/WD 320 (2.5")/WD 160(2.5")/WD VR 150GB/WD 320
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone Fortress FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/TBA
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/TX550M
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

May 16, 2012, 01:28 AM	#15755
popswala Join Date: May 2009 Location: Conway, AR Posts: 2,188 (1.50/day) Thanks: 1,602 Thanked 960 Times in 717 Posts System Specs	ok. I tried looking up on how to oc this board. Not much luck. Theres a easytune6 program for here but for some reason it won't install. I'll try again after next reboot and see if I can get it on here. May mess with it some. I read that it does work but not as much as doing it manually through bios. If anyone have any exp with gigabyte and award bios. PM to guide me or point me in some direction online where I can find how to push this thing some. Thanks __________________ HEAT eBAY My Sale Thread FOLDING GTX 460 SC x2 / 6950 / GTX 275 CRUNCHING I7 870 4.08GHz/ I3 530 3.7GHz / Ph II X4 945 3.2GHzz / Ph II X4 940 3.4GHz / Ph II X3 720 3.4GHz / i7 720QM 1.60GHz = [21c/31t]

May 16, 2012, 01:40 AM	#15756
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,753 (6.93/day) Thanks: 2,546 Thanked 2,450 Times in 1,474 Posts System Specs	I wouldn't install easytune 6 unless you like cpu throttling. I had it installed on my x6 and every couple days the cpu would be running at 2.3 ghz. I went into the bios and static set all the peramiters and it didn't change a thing. After uninstalling Esytune everything went back to normal. I also disabled cool and quiet in the bios but easytune over rided the settings. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	Selene / Yoda / Xp Gaming rig
Processor:	Phenom II x6 1090t @ 3.6 / Phenom II x6 1055t @ 3.2 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	CM Hyper 212+ / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 4gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek Hd7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 750 watt / Corsair TX 650 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

May 16, 2012, 01:45 AM	#15757
popswala Join Date: May 2009 Location: Conway, AR Posts: 2,188 (1.50/day) Thanks: 1,602 Thanked 960 Times in 717 Posts System Specs	If I remember right I don't think cool n quiet is on. I sure don't want throttling. Only I did was up my ram from 1333 to 1600 since my ram is stated 1600. I tried to mess with M.I.T. iirc but that didn't do anything but lockup. I know I need to make changes to other like NB but I'm not sure what all I want to mess with now in what order. I'm running a 945be so not sure how far it'll go stable. __________________ HEAT eBAY My Sale Thread FOLDING GTX 460 SC x2 / 6950 / GTX 275 CRUNCHING I7 870 4.08GHz/ I3 530 3.7GHz / Ph II X4 945 3.2GHzz / Ph II X4 940 3.4GHz / Ph II X3 720 3.4GHz / i7 720QM 1.60GHz = [21c/31t]

May 16, 2012, 01:47 AM	#15758
Jstn7477 Join Date: Aug 2009 Location: Sarasota, Florida, USA Posts: 3,139 (2.30/day) Thanks: 388 Thanked 1,193 Times in 805 Posts System Specs	I never like to use those POS motherboard OC utilities. :P If you have a pain in the ass Phenom/Phenom II based motherboard that won't let you undervolt (such as my Foxconn A7DA-S), you should try out PhenomMsrTweaker. It's the only way I can run a mobile 45w Phenom II X4 X920 quad core @ 2.2GHz in my 35w laptop (replaced a PII X4 P920 1.7GHz). It's not an OCing program in any way. Rather, it lets you set multis, volts and P-states and can apply them at startup as well. __________________ Intel Crunchers (27 threads): 2x 3770K 4.3G (14t), 2600K 4G (7t), X3210 (3t), P-M 735A, P4 HT 3G AMD Crunchers (11 cores):1100T 3.6G (3t), 1045T 3.4G (2t), X3 8550 2.5G, X2 4200+, T64 ML-37 AMD Folders (6272 GCN cores): 2x 7950 1125/1475, 7970 1150/1650, 7770 1100/1200 NV Folders (2336 GF10x + 1344 GK104 cores):GTX 470 & 465 720/1715, 4x 460 768MB 825/2000, GTS 450, 660Ti 1228/6000 HEATWARE

System Name:	Awesomesauce \| Laptop (Toshiba A665D-S6091) \| "The Shoebox"
Processor:	Intel Core i7-3770K @ 4.3GHz/1.18v \| AMD PII Mobile X4 X920 @ 2.3GHz\|AMD E-350 APU
Motherboard:	ASRock Z77 Extreme6 \| NWQAE S1G4 (880G/SB850) \| Gigabyte E350N-USB3
Cooling:	Thermaltake Water 2.0 Performer, 2x Cougar CF-V12HB + 5 Rosewill RFA-120-RL
Memory:	G.Skill RJ-X 16GB DDR3-2000 CL11 \| Stock 2*2GB DDR3-1066 CL7 \| 4GB DDR3-1333
Video Card:	XFX DD HD7950 3GB 1175/1500 1.2v w/ Accelero Xtreme 7970 \| ATI MR 5650 1GB DDR3 @ 550/900 \| 6310 IGP
Hard Disk:	Mushkin Chronos 240GB + Seagate Green 2TB \| WD Scorpio Black 750GB \| Samsung F1 1TB
Optical Drive:	ASUS 24x SATA \| Sony Optiarc AD-7703S 8x Labelflash \| Samsung Writemaster 22x SATA
CRT/LCD Model:	ASUS VG236HE 23" 120Hz 1080p \| 16.0" 1366*768 LED laptop glossy LCD \| Samsung 940BW
Case:	NZXT Source 210 \| Toshiba A665D \| Rosewill MI-01-BK ITX "shoebox"
Sound Card:	Realtek ALC898 \| Realtek ALC269 with harman/kardon speakers \| Realtek ALC892
PSU:	Rosewill CAPSTONE 550w (80Plus Gold) \| 75W 19.5v brick \| Seasonic 350w ITX
Software:	Windows 7 Pro x64 + Ubuntu 12.10 \| Windows 8 Pro x64 (laptop)
Benchmarks:	120FPS in the games I play? :P

May 16, 2012, 02:04 AM	#15761
popswala Join Date: May 2009 Location: Conway, AR Posts: 2,188 (1.50/day) Thanks: 1,602 Thanked 960 Times in 717 Posts System Specs	Thanks. I'll step them back down at next restart. Here's a screenie to show all that I got. Any thought or opinions on what I can do to it. Lookin to get more out of it for crunchin. __________________ HEAT eBAY My Sale Thread FOLDING GTX 460 SC x2 / 6950 / GTX 275 CRUNCHING I7 870 4.08GHz/ I3 530 3.7GHz / Ph II X4 945 3.2GHzz / Ph II X4 940 3.4GHz / Ph II X3 720 3.4GHz / i7 720QM 1.60GHz = [21c/31t] Last edited by popswala; May 16, 2012 at 02:10 AM.

May 16, 2012, 02:40 AM	#15764
popswala Join Date: May 2009 Location: Conway, AR Posts: 2,188 (1.50/day) Thanks: 1,602 Thanked 960 Times in 717 Posts System Specs	This is the one that just went together this wkend. So yea wcg is new on here also. __________________ HEAT eBAY My Sale Thread FOLDING GTX 460 SC x2 / 6950 / GTX 275 CRUNCHING I7 870 4.08GHz/ I3 530 3.7GHz / Ph II X4 945 3.2GHzz / Ph II X4 940 3.4GHz / Ph II X3 720 3.4GHz / i7 720QM 1.60GHz = [21c/31t]

May 16, 2012, 02:47 AM	#15765
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,753 (6.93/day) Thanks: 2,546 Thanked 2,450 Times in 1,474 Posts System Specs	Oh hell man you need to give it about a week to throttle up. All new builds for some reason need to throttle up on the crunching part. I noticed you usually hit full speed after you turn in anywhere from 100 to 150 results. Atleast thats how it's been on all my recent builds. If you notice the graph on my numbers except for today (x6 was down for 6 hrs) since the 11th my numbers have been climbing everyday and thats due to the 555 throttling up since it's build. I should be at full speed by tomorrow. It takes just about a week for the system to hit full crunching speed. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

May 16, 2012, 02:52 AM	#15766
popswala Join Date: May 2009 Location: Conway, AR Posts: 2,188 (1.50/day) Thanks: 1,602 Thanked 960 Times in 717 Posts System Specs	Any configures I should use like on the cpu use, or anything I should adjust. I want to get the most out of it but I also use it. My other rig is maxed out and its moving along quite nicely, faster then my wife's lappy. whats with the stars? i don't remember. You guys got 4 and I've been sitting at 2 for a really, really long time. __________________ HEAT eBAY My Sale Thread FOLDING GTX 460 SC x2 / 6950 / GTX 275 CRUNCHING I7 870 4.08GHz/ I3 530 3.7GHz / Ph II X4 945 3.2GHzz / Ph II X4 940 3.4GHz / Ph II X3 720 3.4GHz / i7 720QM 1.60GHz = [21c/31t]

May 16, 2012, 02:56 AM	#15767
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,753 (6.93/day) Thanks: 2,546 Thanked 2,450 Times in 1,474 Posts System Specs	I have my system set at 95% cpu which seems to help with heat some. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

May 16, 2012, 03:14 AM	#15769
popswala Join Date: May 2009 Location: Conway, AR Posts: 2,188 (1.50/day) Thanks: 1,602 Thanked 960 Times in 717 Posts System Specs	The cpu's under an h50. I thought that was a lil high also as air was getting me around 43c. Funny how going water adds 10c. My old cooler did have some as5 under it but I ran out on last rig so I had to dig throw old coolers and find some tim which was kinda old but got me going. I should have waited on rig but I was too darn anxious to build again lol. __________________ HEAT eBAY My Sale Thread FOLDING GTX 460 SC x2 / 6950 / GTX 275 CRUNCHING I7 870 4.08GHz/ I3 530 3.7GHz / Ph II X4 945 3.2GHzz / Ph II X4 940 3.4GHz / Ph II X3 720 3.4GHz / i7 720QM 1.60GHz = [21c/31t]

May 17, 2012, 12:07 AM	#15771
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,569 (10.01/day) Thanks: 2,148 Thanked 5,342 Times in 3,697 Posts System Specs	I was gonna post these pictures yesterday but got busy and forgot. Its alittle rigged up ATM but once I find a good case for it, then I will be set! __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16542	May 22, 2013 02:25 PM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM