[WTB][US] 2CDIS005-0 Drive Rails

[Ahhzz]

So, I'm not sure if this comes from an Enlight Case, or an Antec case, but it's a thin rail, designed for a specific range case. Pic is attached, and I'm looking for 2 more pair, if anyone has some. Can't seem to locate them anywhere online, and they're not critical, but I'd like to have them for the case I acquired. Anyone seen or have some spares? Thanks!

** Additional research shows this may belong in an InWin case, not Enlight.

 

[Ahhzz]

Per @stinger608 's request, I've uploaded pics of the case itself (not that there's much to it: pretty generic black box with the exception of the LCD readout in front). Hopefully it will trigger someone's memory. Thanks in advance!!

 

[Ahhzz]

Noone spotted any rails for this yet? *sigh* I'm really liking this case, and would love to actually be able to mount the drives in there instead of hanging out in the top 5 1/2 bay

 

[Ahhzz]

Still looking here

 

[95Viper]

** Additional research shows this may belong in an InWin case, not Enlight.

Yep, INWIN case...Inwin X Series IW-X710 circa 2003

IW-X710 ATX parts diagram/list

You can google it and the case is all over the web; however, those "C" rails are a needle in a haystack.

Edit to correct the date as pointed out by Ahhzz.

 

[Toothless]

Are those two PSUs working at once. what

 

[Ahhzz]

Are those two PSUs working at once. what

Why, yes! Yes they are! I've got 6 drives in there, plus a dvd (had 2 but left one out in the move to this case). 5 of those are 2Tb WD Blacks, and past experience showed me that I could have booting issues running that much drive on the same p/s with the main components. I've down-graded to a lower board and processor, and would probably be fine without a second, but I'd rather not put the strain on. If I can get the power supply up from the other thread, I'll probably pull one of the 650s (probably the Corsair) and slide the Chameleon in place.

 

[Ahhzz]

Yep, INWIN case...Inwin X Series IW-X710 circa 2013

IW-X710 ATX parts diagram/list

You can google it and the case is all over the web; however, those "C" rails are a needle in a haystack.

circa 2003 It was actually a 2003 server when I got it They had to get a new one, and had no use for the old case, so I got to bring it home. I liked the size, and thought it would be good as a holding box until I get the other case redone (which is an old AS400 server on casters heheh).

Thanks for the verification. I can't believe the rails are that hard to come by, tho.... Seriously annoying....

 

[Halfpastmonkeysass]

I believe I have a pair or two in storage (kept for an occasion such as this) if you are still searching. At work now but will send out a search party when I get home. I will post my findings and we can take it from there.

 

[Ahhzz]

Would appreciate that! Still searching, and having zero luck heheh. Please let me know what you discover

 

[Ahhzz]

Any luck on that search, @Halfpastmonkeysass ?

 

[Halfpastmonkeysass]

I'm just now trying to post a pic of this one I found to see if it is close enough to what you need. The other ones I have are in storage and I'll be heading there as soon as I finish waking up. Gimme a minute or two to upload this pic.

 

[Halfpastmonkeysass]

Sorry for the delay. My phone was being a straight up dick about the whole thing. Yeah, that's it. All my phone's fault.
Let me know if this is the one

 

[Ahhzz]

Sorry for the delay. My phone was being a straight up dick about the whole thing. Yeah, that's it. All my phone's fault.
Let me know if this is the one

Thanks The one's I'm looking for have a "C" on the end, but I think the "B" model will work as well, as I do have an open spot in the 3 1/2 bay. How much do you want for them, and how many do you have?

 

[Halfpastmonkeysass]

This is what I've come up with thus far. I have not completed my search yet though. I have a couple more places to look (so goddamn hard to organize and make any tangible sense of all this crap) but progress is being made.
I surely wouldn't want anything for them other than what it would take to get them to you.
Got a couple other irons in the fire this weekend so I'm spread a little thin. Just bear with me and I'll let you know what I dug up sometime late Sunday or early Monday

 

[Ahhzz]

No worries: I've waited this long, certainly won't kill me thanks for scrounging!!

 

[Ahhzz]

Still trying to chase some of these down. I'm in contact with InWin, but not having a lot of luck there. Just refreshing in case someone new spots the thread

 

[dorsetknob]

Reason for bump @Ahhzz
Just Found 3 of these they look like they might fit ???????
Well ???

 

[Ahhzz]

Thanks so much for looking! I've actually got a set like that, and believe it or not, they're still to "wide/tall" depending on how you look at it the ones that go in that unit are very very narrow thanks again tho!!!