1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[FS] 38mm Fans (Sanyo Denki SA, Panaflo, Delta) + Watercooling stuff

Discussion in 'Buy/Sell/Trade/Giveaway Forum' started by MakubeX, Nov 19, 2008.

Thread Status:
Not open for further replies.
  1. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    38mm thick fans galore!

    [​IMG]

    First, 1 x Delta EFB1212SHE 120x38mm Triple Blade High Speed - SOLD

    Specifications: 120x120x38mm, 141.96 CFM @ 3700 RPM, 52.5 dBA, 9.60 watts, .80 amps, Maximum Air Pressure 13.21 mm H²O, 12v DC, 3 pin Molex header connector(s). More info HERE.

    Works perfectly, but as you can see in the following pic it has some dried up crazy glue on the edges on the back. The front looks perfectly fine as you can see above, and it doesn't affect performance at all, but it won't be winning any beauty contests, therefore the low price:
    [​IMG]

    Take it for $12 shipped. - SOLD

    _________________________________________________________________________

    Second, 2 x Panaflo 120x38mm Medium Speed FBA12G12M - SOLD

    Specs:
    # Dimensions: 120 x 120 x 38mm
    # Bearing Type: Hydro Wave
    # Connector: 3 pin connector (no rpm sensor)
    # Fan Speed: 2100 RPM
    # Airflow: 86.5cfm
    # Static Pressure: 4.80 mm-H20
    # Noise: 35.5 dba
    # Voltage: 12 vdc
    # Operating Voltage: 7 to 13.8 Volt
    # Power Consumption: 4.08 watt
    # Current Draw: 0.45 amp

    $11 shipped each, $20 shipped for both - SOLD

    _________________________________________________________________________

    Last fans in line, but certainly not least, the renowned Sanyo Denki San Ace

    5 x Sanyo Denki San Ace 109R1212H1011 - ALL SOLD

    Specs:

    Model: 109R1212H1011
    Fan Size: 120mm x 120mm x 38mm
    Speed: 2600 RPM
    Airflow: 102.5 CFM
    Noise: 39 dBA
    Static Pressure: 64.7Pa (~6.6mm H2O)
    Bearing: Ball bearing
    Voltage: 12 V
    Current: .52 Amp
    Power: 6.24 W
    Connector: 3pin w/ rpm monitoring

    You all know how good and (usually) hard to find this case fans is, making it quite expensive.

    One of the Sanyo Denki fans came with some white stains, they are not very noticeable. Look:
    [​IMG]

    They all work perfectly well. Be careful with their blades as these are more fragile than the usual fan.

    ALL SOLD
    Price:
    1 x $20 each shipped
    2 x $18 each shipped
    3 x $17 each shipped
    4 x $16 each shipped
    5 x $15 each shipped


    _________________________________________________________________________

    EK Waterblocks EK-FC4870 CF - Acetal - SOLD

    [​IMG]

    Block flipped: [​IMG]

    Specs:
    - Fits reference ATI HD 4870 cards
    - dimensions of copper base: 118,5 x 112 x 8mm
    - dimensions of POM Acetal top: 119,5 x 113,5 x 8mm
    - threads: 4 x G1/4
    - fittings: 2 x EK High Flow 1/2" OD fittings
    - weight: 556 g

    *It comes with two extra hex screws for the VRM cooler, for a total of 5*

    Price: $90 $80 $75 $70 $68 shipped - Pending - SOLD

    _________________________________________________________________________

    Next, Bitspower Water Tank Z - POM Version - SOLD



    [​IMG]

    Specs:
    * Main body size: 60X130 MM (RxH)
    * Volume: 160 ML
    * Ports: G1/4 "x 3
    * POM Color: Black
    * Includes Fitting: (1) G1/4 "shiny silver stop fitting
    * 1 x 20mm thick white silky fiber kapok filter
    * 1x Bitspower Logo fill top
    * 2 x 1/2" OD High Flow fittings

    Price: $25 shipped - SOLD

    _________________________________________________________________________

    D-TEK FuZion v1 CPU Waterblock w/ Pro-Mount and Nozzle Kit - SOLD

    [​IMG]

    Specs:
    Compatibility: Intel Socket LGA775 Only (All Speeds)
    Housing: Injection molded black Acetal
    Ports: Inlet and outlet G-1/4" threaded ports
    Base plate: Anti-oxidant treated precision machine lapped copper baseplate.
    Hold-down Plate: Pro-Mount Bolt-Thru
    Fittings: No Fittings included
    Accelerator Nozzle Kit Included

    The widest nozzle is already installed inside the block. The glue in the "X" shaped back plate is unused, it still has the protective paper on it.

    As you can see from the pic below, one of the pegs of the Pro mount is getting rusty, but so far it works perfectly. You can always order a pro-mount replacement if needed, however price has been reduce to compensate for it:
    [​IMG]

    Price: $30 shipped - SOLD

    _________________________________________________________________________

    Finally, my good ol' Weapon Heatercores w/ one Weapon Shroud

    [​IMG]
    [​IMG]

    Weapon heatercore + Weapon shroud is an awesome combination. I substituted one of my heatercores + shroud for a PA120.3 + shroud and I'm getting the same temps, except now with the PA120.3 I can use thinner more silent fans. With heatercores 38mm fans are recommended for more static pressure. I am still using a Weapon Heatercore + Shroud for my GPU + SB loop and the cooling performance is fantastic.

    One is painted black all over, the other painted gold only on the edges. I tested both in the same loop and got the same temps with both.

    Either Weapon Heatercore + Weapon Shroud = $40 $37 shipped - SOLD

    Weapon Heatercore alone: $30 shipped - SOLD

    _________________________________________________________________________

    All shipping will be by USPS w/ DC and insurance.

    Most items will be shipped USPS Priority Mail, but if the item is small and light enough, it will be shipped by USPS First Class Mail (it's only 1 or 2 days of difference).

    Shipped Prices are only for North America, that is all 50 states + US Territories. Basically anywhere not considered international.

    I will ship international but buyer pays shipping.

    I only ship to confirmed addresses if payed by Paypal!

    Payment can be by Paypal (preferred) or by USPS MO (only if MO is shipped to me by Priority Mail with DC)

    My Heatware: MakubexGB

    Thanks for looking!


    _________________________________________________________________________
     
    Last edited: Dec 31, 2008
  2. Whilhelm

    Whilhelm New Member

    Joined:
    Jun 21, 2006
    Messages:
    844 (0.27/day)
    Thanks Received:
    203
    Location:
    Barrie, Canada.
    Yhpm
     
  3. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    PM replied.
     
  4. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    bump!
     
  5. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    Price lowered on the - HD4870 Full Cover water block -> Now $80 shipped

    Price lowered on Weapon Heatercore + Shroud combo - > Now $37 shipped
     
  6. nflesher87

    nflesher87 Staff

    Joined:
    Dec 4, 2006
    Messages:
    4,499 (1.54/day)
    Thanks Received:
    487
    Location:
    Texas
    Sweet fans, :) rocking three of the panaflos on my rad
     
  7. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    Thanks nflesher87. :)

    HD4870 Full Cover water block -> Now $75 shipped
     
  8. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    All Fans Sold
     
  9. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    EK 4870 Full Cover block now $70 shipped!
     
  10. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    bump!
     
  11. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    EK 4870 Full Cover block now $68 shipped!!!
     
  12. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    bump
     
  13. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    Heatercore with shroud is pending, other stand alone heatercore is sold.
     
  14. WarEagleAU

    WarEagleAU Bird of Prey

    Joined:
    Jul 9, 2006
    Messages:
    10,804 (3.53/day)
    Thanks Received:
    547
    Location:
    Gurley, AL
    Ill take your res :D
     
  15. MakubeX

    MakubeX

    Joined:
    Jul 18, 2008
    Messages:
    96 (0.04/day)
    Thanks Received:
    7
    Cool, PM replied.

    With Res gone, everything has been sold. :)
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Thread Status:
Not open for further replies.

Share This Page