1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

45nm Opterons in 2008

Discussion in 'News' started by Jimmy 2004, Feb 5, 2007.

  1. Jimmy 2004

    Jimmy 2004 New Member

    Joined:
    Jan 15, 2005
    Messages:
    5,491 (1.50/day)
    Thanks Received:
    267
    Location:
    England
    AMD has released some information about its Shanghai processors – the next generation of server CPUs after the Barcelona cores. The Shanghai processors will be the company’s first 45nm chips, which should bring power consumption and heat benefits over 90nm and 65nm equivilents. They will also have 6MB of L3 cache and use the socket 1207 interface, so should be able to work with current Socket F motherboards providing BIOS updates are released. The Shanghai is likely to compete with Intel’s 45nm offering, known as Penryn.

    Source: DailyTech
     
  2. newtekie1

    newtekie1 Semi-Retired Folder

    Joined:
    Nov 22, 2005
    Messages:
    20,438 (6.08/day)
    Thanks Received:
    6,431
    Intel should be on 32nm by then...
     
    Crunching for Team TPU 50 Million points folded for TPU
  3. WarEagleAU

    WarEagleAU Bird of Prey

    Joined:
    Jul 9, 2006
    Messages:
    10,807 (3.45/day)
    Thanks Received:
    547
    Location:
    Gurley, AL
    not necessarily true. Pretty soon, we will have 1nm procs it seems. Intel may move to small dies and such first, but as was before, AMD passed them and will more than likely happen again. I hope they keep one upping each other personally. That way, I get awesome cpus for good prices :). Thanks for the info.
     
  4. InfDamarvel New Member

    Joined:
    Aug 2, 2006
    Messages:
    500 (0.16/day)
    Thanks Received:
    13
    that change of die size of both gpu and cpu is going to be great for power consumption. Seems like someone is finally thinking about the world and its consumers rather than just trying to push out the most powerful processor no matter the power consumed.
     
  5. DanTheBanjoman Señor Moderator

    Joined:
    May 20, 2004
    Messages:
    10,553 (2.70/day)
    Thanks Received:
    1,383
    Yes we've seen that in the past years. Compare the die size of a Pentium 2 with the current ones and compare power consumption. Consumptions has been going up with every generation. A single CPU uses as much power as a whole computer several years ago. Power usage, even though they claim differently, still isn't one of the main goals, all they care about is performance and therefor sales. Just look at the G80 and R600 for example. Conroe lowered the TDP by quite a lot compared to Prescott though they simply double the cores and raise the clock to actually get a higher TDP. Kentsfield TDP is far past Prescott (80 vs 120 or something) Kentsfield TDP will be lowered in the near future, and they find a way to get it higher again by doubling the cores or something.
     
  6. newtekie1

    newtekie1 Semi-Retired Folder

    Joined:
    Nov 22, 2005
    Messages:
    20,438 (6.08/day)
    Thanks Received:
    6,431
    I see what you are saying, DanTheBanjoman. The power consumption of the high end processors doesn't really go down, in fact it tends to go up, even with continued die shrinks. This is obviously due to increasing the performance of the chips along with shrinking the die. However, the Power:performance ratio, which is what is really important, just keeps getting better. Look at the Utra-Low Voltage processors out there today. We have a 1.33GHz Core Solo processor consuming just 5.5w. They easily out pace older processors in both performance and power usage.
     
    Crunching for Team TPU 50 Million points folded for TPU
  7. kakazza New Member

    Joined:
    Aug 25, 2006
    Messages:
    470 (0.15/day)
    Thanks Received:
    7
    Afaik, 15/16nm is expected in 2013-2014 (note: expected, can be sooner or later).
    And with Atoms being 0.1nm (and larger) 1nm seems unlikely, especially due to those Quantum tunneling effects or w/e. I'd have to ask a physicst :)
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page