AndreaNigo
New Member
- Joined
- Feb 2, 2015
- Messages
- 7 (0.00/day)
- Location
- Vittorio Veneto, Italy
Hello everyone! I'm new in this forum and i'm from Italy.
For months i followed the worklogs on this forum, and now i've decided to show you my last work.
BLACK & GOLD 600T
3 months ago i started modding my case (Corsair Graphite 600t SE), by modify some small things as the top mesh, the 5,25 bay cover and an homemade clear side panel.
But after a bit, i wanted to start a real project, so i modeled and fast-rendered an example to follow:
Cut off the 5,2 bay, and varnished all in matte black to cover the imperfections
I started to cover all internal surfaces with carbon fiber effect film, studied a metal grid to attach the SSDs, re-made the interior wall and covered with carbon fiber film...
...and to the grid i cutted an hole in order ro re-utilize the original 600t rubber grommet
I also started to model the side panel in 3D for a remake , and i had fun with 3D compositing
Unfortunately my last pieces were in backorder, but at least arrived the 140mm fan for frontal intake!
Here one of the pecies i like most
A fan hub that i'll link to the original rehobus by changing the original male connectors to female
While i was waiting the last order again, i finished the "home made" clear side panel
I hope you like my workog, and i apologize for my not perfec english
For months i followed the worklogs on this forum, and now i've decided to show you my last work.
BLACK & GOLD 600T
Asus Sabertooth 990fx r2
Amd FX 8320 (VID: 1,1875 / Clock 3,511 MHz / Idle-Full = 19°C-55°C
Corsair h100i + Gentle Typhoon AP15 120mm
Palit GeForce GTX 770 Jetstream 4gb
Kingston HyperX Beast 16gb
Corsair AX750 Gold Series
SSD Samsung Evo 120gb
SSD Corsair Force 3 120gb (cache disk)
HDD Segate Barracuda 3Tb
Amd FX 8320 (VID: 1,1875 / Clock 3,511 MHz / Idle-Full = 19°C-55°C
Corsair h100i + Gentle Typhoon AP15 120mm
Palit GeForce GTX 770 Jetstream 4gb
Kingston HyperX Beast 16gb
Corsair AX750 Gold Series
SSD Samsung Evo 120gb
SSD Corsair Force 3 120gb (cache disk)
HDD Segate Barracuda 3Tb
3 months ago i started modding my case (Corsair Graphite 600t SE), by modify some small things as the top mesh, the 5,25 bay cover and an homemade clear side panel.
But after a bit, i wanted to start a real project, so i modeled and fast-rendered an example to follow:
Cut off the 5,2 bay, and varnished all in matte black to cover the imperfections
I started to cover all internal surfaces with carbon fiber effect film, studied a metal grid to attach the SSDs, re-made the interior wall and covered with carbon fiber film...
...and to the grid i cutted an hole in order ro re-utilize the original 600t rubber grommet
I also started to model the side panel in 3D for a remake , and i had fun with 3D compositing
Unfortunately my last pieces were in backorder, but at least arrived the 140mm fan for frontal intake!
Here one of the pecies i like most
A fan hub that i'll link to the original rehobus by changing the original male connectors to female
While i was waiting the last order again, i finished the "home made" clear side panel
I hope you like my workog, and i apologize for my not perfec english