1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

All Current Be Quiet! Power Supplies Haswell-ready

Discussion in 'News' started by btarunr, May 21, 2013.

  1. btarunr

    btarunr Editor & Senior Moderator Staff Member

    Joined:
    Oct 9, 2007
    Messages:
    28,713 (11.16/day)
    Thanks Received:
    13,669
    Location:
    Hyderabad, India
    Be Quiet!, market leader with power supplies in Germany for seven consecutive years, confirms that all of it's current PSU models support Intel's fourth generation of Core processors (Codename Haswell). Intel's upcoming Haswell CPUs impose stricter requirements on the power supply regarding energy saving features. To lower the power consumption of current computers even more, the new processors feature new sleep states called C6 and C7. In these states, the processor is nearly shut off completely, bringing down the power consumption close to zero.

    [​IMG]

    Saving money risking quality
    If consumers can use this new deep sleep state depends on their power supply. It must run under very low loads below 0.05 Amps. Many inferior power supplies have problems in these low load situations. Low quality components might even lead to the activation of the PSUs safety circuits. In that case the computer would not start again.

    be quiet! is Haswell ready
    As for be quiet!, all current power supply series, starting with the entry-level Pure Power L8 up to the high-end Dark Power Pro 10, are able to deliver the above mentioned low loads without problems. Even older models are mostly compatible with the fourth Core generation. In detail Dark Power Pro 10 (all models), Straight Power E9 (all models), Pure Power L8 (all models), System Power 7 (all models) and Pure Power L7 (630 W and 730 W) are fully Haswell compatible.
     
  2. suraswami

    suraswami

    Joined:
    Apr 5, 2005
    Messages:
    6,232 (1.79/day)
    Thanks Received:
    832
    Location:
    Republic of Asia (a.k.a Irvine), CA
    Interesting. So the computer will still be running meaning its not in sleep (S3 state) and still consume very less power?
     
  3. Frick

    Frick Fishfaced Nincompoop

    Joined:
    Feb 27, 2006
    Messages:
    10,792 (3.41/day)
    Thanks Received:
    2,349
    http://www.hardwaresecrets.com/arti...out-the-CPU-C-States-Power-Saving-Modes/611/6

    Basicly the CPU is saved to some memory (that article says it's static RAM with an independant power source, dunno how it works with desktop systems, written to cache or something maybe?) and then it goes back to the state it was in when woken up. It also say it takes longer time than say C3.

    I wonder if that is the right C6..
     
  4. Baum

    Joined:
    Feb 16, 2005
    Messages:
    475 (0.13/day)
    Thanks Received:
    39
    Location:
    Germany,Hannover
    now i can sleep well again ^^

    these bequiet are very popular around here in europe as i see them often
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page