1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Antec ISK300-150 Liquid Cooled HTPC

Discussion in 'System Builder's Advice' started by BigBig5, May 21, 2012.

  1. BigBig5

    Joined:
    Oct 7, 2010
    Messages:
    28 (0.02/day)
    Thanks Received:
    5
    Location:
    Hillsborough, NC, USA
    Antec ISK300-150 Liquid Cooled min-itx HTPC UPDATED

    UPDATED
    I am thinking of a Liquid Cooled mini-itx HTPC build for overclocking. I want some feedback on what you all think.

    Case: Antec ISK300-150
    PSU: Athena Power AP-MFATX40 400W 80 PLUS BRONZE
    Motherboard: ASRock A75M-ITX FM1 AMD A75
    CPU: AMD A8-3870K Unlocked Llano 3.0GHz Socket FM1
    GPU: PowerColor HD6750 1GB GDDR5 LOW PROFILE
    Hard Drive: 1-2 TB
    Optical Drive: Slim Blu-Ray
    RAM: PNY XLR8 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) "MAYBE"

    Cooling:
    Pump / Reservoir: XSPC X20 450 Acrylic Pump / Reservoir Combo - Small Profile
    Tubing: 1/4" x 3/4"
    Radiator: XSPC RX240 Dual 120mm Radiator on the outside
    CPU Block: XSPC RayStorm AMD
    GPU Waterblock: XSPC RayStorm GPU
    Fans: 3x 80mm fans led "any good ones" & 4x XSPC 120mm 1200RPM Low Noise Fan
     
    Last edited: May 23, 2012
  2. BigBig5

    Joined:
    Oct 7, 2010
    Messages:
    28 (0.02/day)
    Thanks Received:
    5
    Location:
    Hillsborough, NC, USA
    I am thinking not to use the dual 80mm RAD because what I read about it. So I thinking of a 140mm or 180mm RAD mounted on the outside bottom/right side.
     
  3. BigBig5

    Joined:
    Oct 7, 2010
    Messages:
    28 (0.02/day)
    Thanks Received:
    5
    Location:
    Hillsborough, NC, USA
    I have updated to my close to final hardware list.
    The RAD will be XSPC RX240 Dual 120mm Radiator and it going to be external probably with legs. The RAD will have 4x XSPC 120mm 1200RPM Low Noise Fan.
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page