1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Arctic Cooling Announces Accelero L6 Exclusively for Manli

Discussion in 'News' started by btarunr, May 25, 2009.

  1. btarunr

    btarunr Editor & Senior Moderator Staff Member

    Joined:
    Oct 9, 2007
    Messages:
    28,542 (11.25/day)
    Thanks Received:
    13,643
    Location:
    Hyderabad, India
    Swiss cooling solution provider ARCTIC COOLING has developed a new OEM project Accelero L6 with the leading NVIDIA card manufacturer, Manli Technology Group.

    Exclusively for Manli, the Accelero L6 is a multi-compatible VGA cooler designed by ARCTIC COOLING. The 92mm PWM fan produces high airflow at lower fan speed. Together with an optimised heatsink and pre-applied thermal compound MX-2, heat can be easily dissipated out from the core, resulting in a low GPU temperature.

    [​IMG] [​IMG]

    The Accelero L6 runs quietly even at full load. Installed in a patented fan holder with low noise impeller, the noise level can be reduced to only 0.4 Sone – a level that the stock cooler cannot compete.

    “With our expertise in thermal and noise control management, the unique Accelero L6 can fulfill every need for any Manli mainstream VGA boards. And the success of this new cooler will bring our partnership into a new horizon”, says Magnus Huber, managing director of ARCTIC COOLING.

    The Accelero L6 is used on the following Manli boards:
    • 9800GT 512MB / 1GB DDR3 with HDMI
    • 9600GT 512MB / 1GB DDR3 LP
    • 9600GT 512MB / 1GB DDR2 with HDMI

    These graphic cards will be available in June.

    Source: Arctic Cooling
     
  2. PlanetCyborg

    PlanetCyborg New Member

    Joined:
    May 15, 2009
    Messages:
    119 (0.06/day)
    Thanks Received:
    2
    manli:wtf: i have never heard of it
     
  3. choppy

    choppy

    Joined:
    Jul 18, 2007
    Messages:
    1,173 (0.45/day)
    Thanks Received:
    150
    Location:
    UK
    havent they already got this under the name "accelero L2" ?
     
  4. h3llb3nd4

    h3llb3nd4 New Member

    Joined:
    Feb 15, 2009
    Messages:
    3,323 (1.63/day)
    Thanks Received:
    307
    Location:
    Durban, South Africa
    Nor did I:laugh:
    But let us hope that this brings down the internal temps of HTPCs:)
     
  5. AlCabone New Member

    Joined:
    Oct 2, 2007
    Messages:
    78 (0.03/day)
    Thanks Received:
    2
    Location:
    Europe
    I never understood why do people need high end GPUs in their HTPCs. Are you playing Crysis on it?
     
  6. EnJoY

    EnJoY New Member

    Joined:
    Jun 15, 2005
    Messages:
    129 (0.04/day)
    Thanks Received:
    19
    Location:
    Massachusetts, USA
    Yes, I am.


    Back on topic, wtf is manli? :wtf:
     
  7. btarunr

    btarunr Editor & Senior Moderator Staff Member

    Joined:
    Oct 9, 2007
    Messages:
    28,542 (11.25/day)
    Thanks Received:
    13,643
    Location:
    Hyderabad, India
    One of the more popular NVIDIA/ATI partners in PRC, HK, etc. It even sells an X58 motherboard. It doesn't operate in EU or US, hence, you're new to it.
    http://www.manli.com/
     
  8. DonInKansas

    DonInKansas

    Joined:
    Jun 2, 2007
    Messages:
    5,096 (1.91/day)
    Thanks Received:
    1,265
    Location:
    Kansas
    These cards aren't considered "high-end" anymore.:laugh:
     
  9. Easo

    Easo

    Joined:
    May 19, 2009
    Messages:
    824 (0.42/day)
    Thanks Received:
    78
    Location:
    Latvia
    Kinda strange looking cooler imho. Though i think it may do its job quite well.
     
  10. PlanetCyborg

    PlanetCyborg New Member

    Joined:
    May 15, 2009
    Messages:
    119 (0.06/day)
    Thanks Received:
    2
    AIcapone your a funny guy:laugh:9600GT high end gfx card:roll:
     
  11. Odin Eidolon

    Odin Eidolon New Member

    Joined:
    Feb 12, 2008
    Messages:
    921 (0.38/day)
    Thanks Received:
    156
    Location:
    Rockclimbing somewhere in Italy
    i had a manli card several years ago. if i recall correctly, i used to play Diablo 1 on it LOL. it had 64mb of memory i believe
     
  12. erocker

    erocker Super Moderator Staff Member

    Joined:
    Jul 19, 2006
    Messages:
    39,654 (13.29/day)
    Thanks Received:
    14,045
    That exact cooler is already on 4670's and the like. I don't see what is so exclusive about it. It does work pretty well though.
     
  13. Fishymachine New Member

    Joined:
    May 25, 2009
    Messages:
    208 (0.11/day)
    Thanks Received:
    9
    #@^^ markketing

    I'd like to see a "IT&C Professional" that would buy the DDR2 9600 :nutkick:
     
  14. lemonadesoda

    lemonadesoda

    Joined:
    Aug 30, 2006
    Messages:
    6,250 (2.12/day)
    Thanks Received:
    963
    Not a good design. The fans that are mounted INSIDE a cooling fin system are the most effective... because spilt wind (the air that is pushed outwards) is also used to cool. Here the baffles only catch half the spilt wind and also cause resistance, decreasing performance and increasing noise.

    Arctic could have done much better, IMO.
     
  15. erocker

    erocker Super Moderator Staff Member

    Joined:
    Jul 19, 2006
    Messages:
    39,654 (13.29/day)
    Thanks Received:
    14,045
    This cooler kept my HD 4670 at 29c/idle 41c/load. It's obviously a very cheap design, but it does work very well.
     
  16. twicksisted

    twicksisted

    Joined:
    Oct 4, 2007
    Messages:
    2,436 (0.96/day)
    Thanks Received:
    350
    "Manli" as opposed to "girly" :D
     
  17. Odin Eidolon

    Odin Eidolon New Member

    Joined:
    Feb 12, 2008
    Messages:
    921 (0.38/day)
    Thanks Received:
    156
    Location:
    Rockclimbing somewhere in Italy
    holy crap man that was ugly :D:nutkick:
     
  18. AsRock

    AsRock TPU addict

    Joined:
    Jun 23, 2007
    Messages:
    10,897 (4.12/day)
    Thanks Received:
    1,673
    Location:
    US
    Not been happy with any of their coolers since the extreme ones for the 8800\2900. I'd buy another for my 4890 if they would make one that looks and performs like the extreme's. Although they were not perfect the reg heatsink for the 2900 is crap.


    As for this cooler as some one else said looks kinda odd. Was not thrilled about thte ram not being covered fully but probably don't need it.
     
  19. kenkickr

    kenkickr

    Joined:
    Dec 5, 2007
    Messages:
    4,822 (1.95/day)
    Thanks Received:
    1,444
    Crunching for Team TPU
  20. qwerty_lesh

    qwerty_lesh

    Joined:
    Jul 26, 2007
    Messages:
    534 (0.20/day)
    Thanks Received:
    41
    Location:
    Melbourne, Australia
    Their GTX295 looks much nicer, looks so solid and durable and heavy, since its all housed, I have an unopen 9800GT from Manli sitting near me here, ive been meaning to give a whirl.
    I gotta say, when I met the vendor I was like 'sorry never heard of manli' rofl.
     
  21. ShadowFold

    ShadowFold New Member

    Joined:
    Dec 23, 2007
    Messages:
    16,921 (6.88/day)
    Thanks Received:
    1,644
    Location:
    Omaha, NE
    The two ASUS 4830's in my HTPC have the same cooler..
     
  22. tkpenalty New Member

    Joined:
    Sep 26, 2006
    Messages:
    6,958 (2.39/day)
    Thanks Received:
    345
    Location:
    Australia, Sydney
    Yes even though this cooler does better than zalman's old radial fin design coolers. You do realise high resistance is a good aspect if there is a relatively high pressure fan. This 92mm is not the standard affair 9/7 fin fan.
     
  23. Hayder_Master

    Hayder_Master

    Joined:
    Apr 21, 2008
    Messages:
    5,175 (2.21/day)
    Thanks Received:
    638
    Location:
    IRAQ-Baghdad
    so we see new card's with good cooling
     
  24. jagass New Member

    Joined:
    Feb 10, 2009
    Messages:
    271 (0.13/day)
    Thanks Received:
    13
    Thanks for sharing some info...
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page