dipsta
New Member
- Joined
- Aug 3, 2008
- Messages
- 269 (0.05/day)
- Location
- Yorkshire UK
System Name | Dark Sideslayer |
---|---|
Processor | Core i5 2500k @5.0GHz @13.84v |
Motherboard | ASRock Z68 Extreme4 Gen3 |
Cooling | MCps655 Pump, XSPC Res, RC360 Rad, EK-Supreme HF Acetal+E |
Memory | CORSAIR VENGEANCE 8GB (2X4GB) DDR3 PC3-15000C9 1866MHZ DUAL CHANNEL KIT |
Video Card(s) | ASUS Direct CU II 1.2v 930/1360 |
Storage | 60gb OCZ Agility 3, 40gb Kingston V Series & 2*500 sata |
Display(s) | Samsung SyncMaster 245B plus |
Case | COOLERMASTER RC1100 COSMOS SPORT customised |
Audio Device(s) | Realtek THX Onboard |
Power Supply | Coolermaster Real power 700W |
Software | Windows 7 Ultimate 64 |
Benchmark Scores | 3d Mark Vantage 22491, 3d Mark06 32242, PC Mark 07 5398, 3d Mark 2011 5983, PC Mark Vanatge 24541 :0 |
Well guys i went with the Asus Direct 6950 CU II in the end, it does have the switch, but im unsure whether the bios is unlockable, i haven't tried yet, for now i wanted to see just how far i can push it out of the box. Now are artifacts caused by low voltage? or by high clocks, and what is the highest recommended voltage i can take this to? I've scored 30k+ in 3d mark 06 but started to artefact toward the end, gonne push more voltage as the temps are good i'm at 1.162 at the moment.