1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

ATTN: Anyone with EVGA GTX 560 Ti (reference), NEED HIGH RES PICTURE OF PCB

Discussion in 'NVIDIA' started by OmegaAI, Mar 21, 2011.

  1. OmegaAI

    OmegaAI New Member

    Joined:
    Jan 24, 2009
    Messages:
    369 (0.18/day)
    Thanks Received:
    28
    Location:
    Stuff
    I need someone with a GOOD camera and GOOD eyes to do 2 things.

    On the back of the card, you will see a component schematic number D11 (with card laying on its front, long side toward you (sli connector away from you), bottom left screw, there is a small component with the label D11.

    I need anyone with good eyes to tell me what is printed on that tiny black thing AND if you can, take a picture of it (a close up, high quality picture) of that area of possible.

    Area I am referring to is where the red circle is.

    [​IMG]

    Example of what some of the little black things say:

    KA2 X7
    A7W 97


    Thanks
  2. Fitseries3

    Fitseries3 Eleet Hardware Junkie

    Joined:
    Oct 6, 2007
    Messages:
    15,509 (6.22/day)
    Thanks Received:
    3,107
    Location:
    Republic of Texas
    um....

    w1zzard puts HIGH RES images in EVERY SINGLE REVIEW he does. you might check there.
  3. entropy13

    entropy13

    Joined:
    Mar 2, 2009
    Messages:
    4,901 (2.48/day)
    Thanks Received:
    1,188
    He did get that pic in his post from the review of the reference GTX 560 Ti.
  4. OmegaAI

    OmegaAI New Member

    Joined:
    Jan 24, 2009
    Messages:
    369 (0.18/day)
    Thanks Received:
    28
    Location:
    Stuff
    Yeah but it isn't detailed (nor close enough) to get what I need. So I need to do a little more work.

    I have looked at EVERY SINGLE GTX560 Ti and I cannot read the labeling on top of the chips. If I could get what I need from the pics, I wouldn't have made this thread.
  5. Fitseries3

    Fitseries3 Eleet Hardware Junkie

    Joined:
    Oct 6, 2007
    Messages:
    15,509 (6.22/day)
    Thanks Received:
    3,107
    Location:
    Republic of Texas
    ah... sorry.

    PM w1zz and ask for a better pic.

    he's actually pretty nice ;)
  6. erocker

    erocker Super Moderator Staff Member

    Joined:
    Jul 19, 2006
    Messages:
    39,541 (13.47/day)
    Thanks Received:
    13,941
    Fitseries3 says thanks.
  7. OmegaAI

    OmegaAI New Member

    Joined:
    Jan 24, 2009
    Messages:
    369 (0.18/day)
    Thanks Received:
    28
    Location:
    Stuff
    :/ What part of this do you guys not understand.... I cannot even make out the letters and numbers on the diode all the way in the bottom left hand side of the card. They are stamped and can only be seen from a certain angle. The angle that extra large pic was taken from isn't large enough sadly...nor does it have the clarity I need.

    AKA, I need a pic of only a certain area of the card. With that you can get a much clearer, crisper pic.

    Or you can read what the chip sets. Either way.... :/

    But thanks for the effort guys. I should have been clearer, sorry.
  8. pabloottawa

    Joined:
    Jan 27, 2011
    Messages:
    250 (0.19/day)
    Thanks Received:
    15
    If you're referring to the numbers or letters on the chip itself, that's way too small for anyone to make out as you can plainly see. I can't help you, mine is an Asus card and if you want, here is a pic although I doubt it will help, the pic manager won't let me upload a 4MB pic so the detail sucks. And by the way, if you're THAT frustrated then perhaps you should go and get your own high res camera. Might I suggest a Canon Power Shot SX20-is :)

    Attached Files:

    Last edited: Apr 15, 2011
  9. newtekie1

    newtekie1 Semi-Retired Folder

    Joined:
    Nov 22, 2005
    Messages:
    19,727 (6.21/day)
    Thanks Received:
    5,869
    [​IMG]

    W1z posts a much higher res shot if you read the text right above the pictures that you click on. :D Still can't make out the letters on the component though, and I would guess that is going to be extremely hard with any camera. You might just PM w1z and ask him to look at the card for you, I'm sure he will tell you.
    Crunching for Team TPU 50 Million points folded for TPU
  10. pabloottawa

    Joined:
    Jan 27, 2011
    Messages:
    250 (0.19/day)
    Thanks Received:
    15
    I see a P and a 77. Can't make out the rest
  11. 95Viper

    95Viper

    Joined:
    Oct 12, 2008
    Messages:
    4,308 (2.03/day)
    Thanks Received:
    1,548
    Location:
    στο άλφα έως ωμέγα
  12. pabloottawa

    Joined:
    Jan 27, 2011
    Messages:
    250 (0.19/day)
    Thanks Received:
    15
    Curious,

    Why do you need to know anyway?
  13. NdMk2o1o

    NdMk2o1o

    Joined:
    Apr 21, 2010
    Messages:
    3,444 (2.20/day)
    Thanks Received:
    922
    Location:
    Redditch, Worcestershire, England
    I assume his fell/was knocked off and he wants to know what kind of didoe-thingy it is to try and get a replacement to solder it back on? :confused: or maybe not lol
  14. tigger

    tigger I'm the only one

    Joined:
    Mar 20, 2006
    Messages:
    10,183 (3.33/day)
    Thanks Received:
    1,399
    Says WW1 then 60 on its side anyway.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page