1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Bad reading of Sandy bridge iGPU

Discussion in 'GPU-Z' started by Derek12, Jan 6, 2012.

  1. Derek12

    Joined:
    Jan 12, 2010
    Messages:
    1,096 (0.66/day)
    Thanks Received:
    163
    Latest GPUZ. Almost all data is incorrect, missing clock readings and memory size.

    Alongside AIDA64 which seems to be correct.

    [​IMG]
  2. brandonwh64

    brandonwh64 Addicted to Bacon and StarCrunches!!!

    Joined:
    Sep 6, 2009
    Messages:
    18,440 (10.36/day)
    Thanks Received:
    5,995
    Location:
    Chatsworth, GA
    Mine does the same thing. I dont think GPUz has been set for SB GPU yet
    Derek12 says thanks.
    Crunching for Team TPU
  3. Snigel

    Snigel New Member

    Joined:
    Oct 22, 2006
    Messages:
    12 (0.00/day)
    Thanks Received:
    0
    Bus width should be the same as the ram memory, either one channel at 64bit or dual channel at 128bit.
    Memory clock is the same as the ram memory clock as well.

    Core clock is dependant on CPU model, notebookcheck and tech arp has some information:
    http://www.techarp.com/showarticle.aspx?artno=98&pgno=10
    http://www.notebookcheck.net/Intel-HD-Graphics-3000.37948.0.html

    HD Graphics (Sandy Bridge) 12@350 - 1100MHz

    If the frequency is right then it should turn out something like this.
    Pixel Fillrate should be 2*1100MHz = 2.2GP/s
    Texture Fillrate should be 4*1100Mhz = 4.4GT/s
    Last edited: Jan 25, 2012
  4. micropage7

    micropage7

    Joined:
    Mar 26, 2010
    Messages:
    5,581 (3.53/day)
    Thanks Received:
    1,281
    Location:
    Jakarta, Indonesia
    if it run well, no BSOD and stable i guess its ok
    its just miss read
  5. Snigel

    Snigel New Member

    Joined:
    Oct 22, 2006
    Messages:
    12 (0.00/day)
    Thanks Received:
    0
    Well, the topic states that the readings are wrong, not that his computer is broken ;)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page